SCV1-2596
ULTRA LOW OUTGASSING ELECTRICALLY CONDUCTIVE SILICONE ADHESIVE/SEALANT
Description
- Two-part, tan-colored electrically conductive silicone
- 20:1 Mix Ratio (Part A:B)
Applications
- For applications requiring Ultra Low OutgassingTM and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
- Use for RFI and EMI shielding in electrical and space applications
- Well suited for form-in-place conductive gaskets
Exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤0.1% and CVCM of ≤0.010%
Product Details
| Property | Average Result |
|---|---|
| Volume Resistivity | 0.01 ohmcm |
| Cure System | Platinum |
| Durometer | 85 Type A |
| Tensile | 450 psi (3.1 MPa) |
| Appearance | Tan |
| Cte | |
| Cure | 30 minutes / 150 °C |
| Mix Ratio | 20:1 |
| Special Feature | |
| Specific Gravity | 3.42 |
| Thermal Conductivity | 1.2 W/(mK) |
| Work Time | 2.5 hours |
| Comment | Electricaly Conductive, 0.005 ohmcm ,*21, 22) 1.2 W /mK |
What Is Space Grade?
Discover what it takes to make silicones worthy of the distinction "Space Grade" and the rigorous testing that these materials undergo.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.