Description
- Two-part, optically clear silicone system
- Low viscosity
- Convenient 1:1 mix ratio (Part A:B)
Applications
- For electronic and space applications requiring Ultra Low OutgassingTM and minimal volatile condensables to avoid condensation in sensitive devices
- As an embedding or potting compound for electronic assemblies and components to provide protection from extremes in humidity, radiation, thermal stress and mechanical stress
- Suitable as an adhesive in applications such as solar cell arrays where clarity and low volatility are important
- For applications requiring a low viscosity for superior flow
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Viscosity | 3,300 cP (3,300 mPa*s) |
Lap Shear | 175 psi (1.21 MPa) |
Durometer | 50 Type A |
Appearance | Clear |
Cte | |
Cure | 15 minutes / 150 °C |
Elongation | 90 % |
Mix Ratio | 1:1 |
Special Feature | |
Specific Gravity | 1.02 |
Tensile | 925 psi (6.38 MPa) |
Work Time | 4 hours |
Comment | *4) Primed Lap Shear 175 psi (1.2 MPa) |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.