• Two-part, black electrically conductive RTV silicone
  • 10:1 Mix Ratio (Part A:B)


  • For applications requiring Ultra Low OutgassingTM and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
  • Use for RFI and EMI shielding in electronic and space applications
  • Use to adhere covers onto housings or for any application where grooves and other configurations require a flowable to limited flow material
  • For applications requiring a broader operating temperature range
Exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤0.1% and CVCM of ≤0.010%

Product Details

Property Average Result
Volume Resistivity 2.5 ohmcm
Cure System Platinum
Durometer 75 Type A
Tensile 475 psi (3.28 MPa)
Appearance Black
Cure 30 minutes / 150 °C
Elongation 90 %
Lap Shear 250 psi (1.72 MPa)
Lap Shear 250 psi (1.72 MPa)
Mix Ratio 10:1
Special Feature
Specific Gravity 1.19
Work Time 2 hours

High-precision laser performance with ultra-low outgassing silicone

Learn how NuSil collaborated with a leading manufacturer of lasers to improve longevity and stability of space-based lasers.

Learn more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.