Description
- Two-part, optically clear, solvent free, low viscosity silicone
- Cures at room temperature or rapidly with heat
- 10:1 Mix Ratio (Part A:B)
Applications
- For bonding, casting or injection molding of high performance optical components
- For applications requiring index matching at 1.41
- For applications requiring an operating temperature range of -65 to 240°C (–85 to 465°F)
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Viscosity | 5,300 cP (5,300 mPa*s) |
Durometer | 50 Type A |
Tensile | 1,300 psi (8.97 MPa) |
Elongation | 95 % |
Appearance | Clear |
Cure | 15 minutes / 150 °C |
Dielectric Strength | 500 volts/mil (19.5 kV/mm) |
Mix Ratio | 10:1 |
Operating Temperature | -65 °C / 240 °C |
Refractive Index | 1.41 |
Specific Gravity | 1.03 |
Tack Free Time | 15 hours |
Tear | 20 ppi (3.53 kN/m) |
Volume Resistivity | 1,000,000,000,000,000 ohmcm |
Work Time | 5.5 hours |
Comment | General use RTV clear adhesive |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.