Description
- A translucent, one-part, RTV silicone
- Based on a 100 mole % fluorosilicone polymer
Applications
- For sealing and bonding applications requiring solvent and/or fuel resistance
- Bonds aggressively to most surfaces
Product Details
| Property | Average Result |
|---|---|
| Cure System | Acetoxy |
| Extrusion Rate | 150 g/minute |
| Lap Shear | 275 psi (1.9 MPa) |
| Durometer | 35 Type A |
| Appearance | Translucent |
| Attribute | |
| Cure | 7 days / 25 °C |
| Elongation | 425 % |
| Mix Ratio | 1 PART |
| Non Volatile Content | 100 % |
| Operating Temperature | -65 °C / 240 °C |
| Specific Gravity | 1.4 |
| Tack Free Time | 30 minutes |
| Tear | 60 ppi (10.58 kN/m) |
| Tensile | 850 psi (5.86 MPa) |
| Comment | Bonds Aggressively |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.