Description
- Two-part, white, thermally conductive, low viscosity silicone
- elastomer
- Cures with the addition of heat
- 1:1 Mix Ratio (Part A: Part B)
Applications
- For applications requiring low outgassing and minimal volatile
- condensables under extreme operating conditions
- To provide heat transfer between electrical/electronic
- components and their heat sinks
- Use to adhere integrated circuit substrates, base plates, heat
- sinks or where grooves or other configurations require a limited
- flow material
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Thermal Conductivity | 0.95 W/(mK) |
| Viscosity | 50,000 cP (50,000 mPa*s) |
| Cure System | Platinum |
| Tensile | 180 psi (1.24 MPa) |
| Appearance | White |
| Cure | 15 minutes / 150 °C |
| Durometer | 65 Type A |
| Elongation | 50 % |
| Lap Shear | 120 psi (0.83 MPa) |
| Mix Ratio | 1:1 |
| Specific Gravity | 2.34 |
| Tack Free Time | 13 hours |
| Comment | *22) 1.0 W /mK, *5) Primed Lap Shear 120 psi (0.8 MPa) |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.