Description
- One-Part, translucent, self-leveling RTV silicone
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- As a sealing, caulking, adhesive or potting material in electronic and space applications requiring minimal outgassing to avoid condensation in sensitive devices
- For bonding and sealing with controlled flow for consistent bond lines in applications that require a high extrusion rate and one-part material
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Oxime |
| Viscosity | 13,000 cP (13,000 mPa*s) |
| Extrusion Rate | 70 g/minute |
| Lap Shear | 65 psi (0.45 MPa) |
| Durometer | 30 Type A |
| Appearance | Translucent |
| Cure | 7 days / RTV |
| Elongation | 200 % |
| Specific Gravity | 1.05 |
| Tensile | 400 psi (2.76 MPa) |
| Comment | Low viscosity and self leveling. Recommended for board temperature applications. 65 psi (0.45 Mpa) primed (SP-120), lap shear. |
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.