CV1-1142-4
NON-CORROSIVE, CONTROLLED VOLATILITY, UV TRACER, RTV SILICONE ADHESIVE/SEALANT
Description
- One-Part, translucent, self-leveling RTV silicone
- High extrusion rate
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- As a sealing, caulking, adhesive or potting material in electrical and space applications requiring minimal outgassing to avoid condensation in sensitive devices
- For bonding and sealing with controlled flow for consistent bond lines
- Built in UV tracer
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Cure System | Oxime |
| Extrusion Rate | 60 g/minute |
| Durometer | 35 Type A |
| Appearance | Translucent |
| Cure | 7 days / RTV |
| Elongation | 200 % |
| Flow Rate | 3 in (76.2 mm) |
| Mix Ratio | 1 PART |
| Specific Gravity | 1.05 |
| Tensile | 350 psi (2.41 MPa) |
| Comment | Self-leveling, Built-in UV Tracer |
What Is Space Grade?
Discover what it takes to make silicones worthy of the distinction "Space Grade" and the rigorous testing that these materials undergo.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.