CV-2688-12
CONTROLLED VOLATILITY FILM ADHESIVE
Description
- Two-part film adhesive
- Cures at room temperature or rapidly with heat
Applications
- For electronic and space applications requiring low outgassing and minimal volatile condensables to avoid condensation in sensitive devices
- For bonding or sealing silicone elastomers and some metals or plastics
- For applications requiring shorter work times, easy clean-up, and consistent bond thickness
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
Product Details
| Property | Average Result |
|---|---|
| Appearance | Translucent |
| Cte | |
| Cure | 4 hours / 65 °C |
| Cure System | Platinum |
| Cure Type | RTV |
| Elongation | 850 % |
| Lap Shear | 250 psi (1.7 MPa) |
| Rheology | Thixotropic / Non-slump |
| Substrate | Primerless: ABS / Aluminum / Glass / Metal / PEEK / Plastic / PMMA / Polycarbonate / Polyetherimide / Polymide / Polyurethane / Silicone / Stainless steel / Titanium |
| Tear | 115 ppi (20.3 kN/m) |
| Tensile | 1,450 psi (10.0 MPa) |
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.