Supplier: Upchurch Scientific

The filters with stems are 100% 316 stainless steel.

Supplier: Upchurch Scientific

RheFlex® Two-Piece Fingertight PEEK™ fittings provide inert, biocompatible connections for instrumentation

Supplier: Upchurch Scientific

FlushNut™ Fittings are designed for tight-space applications where nut heads often interfere with each other

Supplier: Upchurch Scientific

Upchurch Scientific® stainless steel frits are available in several porosities: 0.5, 2, 10, and 20 µm.

Supplier: Upchurch Scientific

These 316 stainless steel frits are the most common size filters used throughout HPLC systems.

Supplier: Upchurch Scientific

Upchurch Scientific® Quick Connect Luer Adapters by IDEX Health & Science adapt luers to 1/4-28, 10-32, 5/16-24, or M6 threaded ports.

Supplier: Upchurch Scientific

Upchurch Scientific® PEEK™ (polyetheretherketone) polymer tubing is biocompatible, chemically inert to most solvents, and can be used to replace stainless steel tubing in most liquid analytical systems.

Supplier: Upchurch Scientific

For higher pressure and temperature applications where a Flangeless connection is desired, consider the Flangeless SealTight™ Fitting System

Supplier: Upchurch Scientific

Upchurch Scientific® Back Pressure Regulators (BPRs) are designed to enhance system performance through outgassing prevention and improved pump check valve efficiency.

Supplier: Upchurch Scientific

These unique Upchurch Scientific® tubing adapters connect peristaltic tubing to standard 1/16" or 1/8" OD tubing (using different fittings than are supplied with the product, available separately).

Supplier: Upchurch Scientific

RheFlex® Two-Piece Fingertight PEEK fittings provide inert, biocompatible connections for instrumentation

Supplier: Upchurch Scientific

Fused silica tubing is offered in the most common 360 μm Ext.Ø and in convenient 2 m lengths.

Supplier: Upchurch Scientific

Large Bore Fittings are designed for use with 5/16-24 or 1/2-20 thread port configurations and can be used with 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3.0 mm, or 4.0 mm OD tubing, depending on the fitting combination used.

Supplier: Upchurch Scientific

Precolumn MicroFilters, PEEK frit contains total void volume of 0.5 µl.

Supplier: Upchurch Scientific

This 4 Way PEEK Bulkhead Flow Valve is ideal if your application involves low frequency of use and demands operator control or involves injection of smaller sample volumes.

Supplier: Upchurch Scientific

FlushNut™ Fittings are designed for tight-space applications where nut heads often interfere with each other

Supplier: Upchurch Scientific

Upchurch Scientific® Low Pressure Tees and Crosses manufactured by IDEX Health & Science are available in two inert polymers and can handle pressures to 1,000 psi (69 bar) and each is designed with handy mounting holes

Supplier: Upchurch Scientific

Upchurch Scientific® Standard Manifolds from IDEX Health & Science are available in 5, 6, 7 or 9 Port configurations to combine several streams into one, or split one fluid stream into several

Supplier: Upchurch Scientific

For fine control of fluid flow rates, these valves can reduce outgoing flow

Supplier: Upchurch Scientific

Upchurch Scientific® seamless, precut, stainless steel tubing is designed to meet the exacting requirements of today's analyses.

Supplier: Upchurch Scientific

ETFE (ethylene-tetrafluoroethylene) tubing is chemically inert and suitable for higher pressure applications (when using aqueous mobile phases) than PTFE, FEP and PFA.

Supplier: Upchurch Scientific

Designed to accurately split and control a low-flow stream of a single incoming supply.

Supplier: Upchurch Scientific

316 stainless steel, .080 inch ID x 1/ inch OD, 40/60-degree

Supplier: Upchurch Scientific

Placed between the pump and sample injection valve, an inline solvent filter traps particles released through normal pump piston seal wear

Supplier: Upchurch Scientific

Upchurch Scientific® PEEK™ Y Connectors are designed to split a stream or join two streams together, just like a tee

Supplier: Upchurch Scientific

IDEX Health and Science very high pressure (VHP) fittings are designed to withstand the extreme operating pressures of today's modern UHPLC systems

Supplier: Upchurch Scientific

A precolumn filter placed between the sample injection valve and the HPLC column protects the column from particles originating in the sample and from pump and valve seal wear.

Supplier: Upchurch Scientific

Upchurch Scientific® polymer unions are available in a variety of configurations.

Supplier: Upchurch Scientific

MicroTight™ Tubing Sleeves facilitate capillary tubing connections with our MicroTight accessories

Supplier: Upchurch Scientific

With virtually identical chemical resistance to PFA at a lower price, Upchurch Scientific® tubing made of DuPont® FEP fluoropolymer is great for general, low pressure applications.