You searched for: Microscopy and staining reagents

Supplier: Electron Microscopy Sciences

DEPEX is a colorless, neutral, xylene miscible mountant which is suitable for preparations where Canada Balsam is usually used.

Supplier: Electron Microscopy Sciences

This EMS one part Epoxy Gold Paste is a gold-filled conductive bonding, exhibiting high electrical conductivity and bond strength.

Supplier: Electron Microscopy Sciences

This pen is designed for making instant conductive silver traces.

Supplier: Electron Microscopy Sciences

This mounting medium is made with limonene, a natural product from orange peels. It preserves  tissues and cell smears that can be dehydrated with organic solvents in immunohistochemistry, e.g. DAB and DAB with nickel or cobalt.

Supplier: Cargille Laboratories

Essential for Sharp Resolution at High Magnification

Supplier: Avantik

Optik Type 2 Alcoholic Clarifier is designed to be used with Type 2 Hematoxylin to produce cell transparency and remove any non-specific staining. Slightly milder clarifier than the Optik Aqueous Clarifier.

Supplier: Electron Microscopy Sciences

Epo-Tek® H20E is a two component, 100% solid silver-filled epoxy system.

Supplier: Electron Microscopy Sciences

Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.

Supplier: Electron Microscopy Sciences

When preparation requirements include less expensive, uniform size and shape, and short processing times, hot mounting (hot compression mounting) is ideal. Hot mounting takes place under pressure in a mounting press, where the specimen is placed in a cylinder together with the appropriate mounting resin.

Supplier: Electron Microscopy Sciences

Fluoro-Gel Mounting Medium with a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula preserves rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 388, Alexa Fluoro 594 tetramethyly rhodamine, and Redox. The fluorescence is retained during prolong storage at 4°C in the dark. This medium contains Phynylenediamine and is not suitable for immunofluorescence of Cy dyes, Phycoerythrin (R-PR) phycocyanin  (PC), and allophycocyanin (APC).

Supplier: Mopec

Mopec’s Formaway formalin neutralizing powder safely and easily neutralizes spent formalin waste to a non-hazardous and non-toxic solution in only 20 minutes. Contents are emptied directly into 1 gallon of spent 10% Formalin or 4% Glutaldehyde, reducing risk exposure to lab personnel. This unique formula also eliminates drain-clogging polymers.

Supplier: Electron Microscopy Sciences

LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It has a very low viscosity (8cps), is non-toxic resin, and is suitable for both Light and Electron Microscopy.

Supplier: Electron Microscopy Sciences

Ethanol, formalin, glacial acetic acid, distilled water.

Supplier: Aladdin Scientific

Immersion oil for microscopy

Supplier: KPL

Fluorescent Mounting Media is glycerol-based and optically clear liquid for immunofluorescence microscopy

Supplier: Electron Microscopy Sciences

Handy pellet form melts rapidly.

Supplier: Electron Microscopy Sciences

A unique embedding primer.

Supplier: Biotium

EverBrite™ Mounting Media are anti-fade mountants for preserving fluorescence during microscopy

Supplier: Electron Microscopy Sciences

For some tissues, the use of formalin (contains 10 – 15% Methanol) is not suitable, we offer the alternative formaldehyde (prepared from paraformaldehyde – contains no methanol) for your convenience.

Supplier: Electron Microscopy Sciences

Reduces infiltration time by one-third. Cuts to 2 micron thickness with excellent ribbon continuity.

Supplier: Electron Microscopy Sciences

for bonding strain gages and special-purpose sensors, useful in temperatures from -452°F to +350° F (-269°C to +175°C), recommended for transducer applications up to +250°F (+120°C), Shelf Life, Post Life and Pot life:about nine months, C

Supplier: Electron Microscopy Sciences

The Crystal Clear™ series of polyurethane resins are designed for applications that require absolute clarity

Supplier: G-Biosciences

Decolorizer (Truant-Moore) reagent is used in the Fluorescent microscopic detection of mycobacteria.

Supplier: Electron Microscopy Sciences

The one glue we all know and have used.

Supplier: Genetex

FluoroGel is an aqueous-based mounting medium designed for the preservation of fluorescence-stained tissue sections.

Supplier: Electron Microscopy Sciences

This EMS Xylene Substitute solution is specially designed for use in processing and staining histological/cytological specimens. It is essentially odorless with low toxicity, less irritating to the skin than xylene- and d-limonene-based clearants. It can be substituted for xylene and can be used with almost all tissue processors and automated slide stainers.

Supplier: Electron Microscopy Sciences

This mixture is less viscous than the final embedding mixture of EMbed-812.

Supplier: Avantik

Optik Type 1 Clarifier is a uniquely formulated buffer that enhances cytoplasmic details, increases cell transparency and helps eliminate background staining.

Supplier: G-Biosciences

QuenchShield™ Mountant is glycerol based aqueous mountant, which prevents quenching of fluorescence of fluorescent labeled cells and tissues samples during fluorescence microscopy experiments. In addition, it helps preserve the fluorescence of stored slides.

Supplier: Electron Microscopy Sciences

Kit consists of 500 mL LR Gold Resin, 100g Polyvinylpyrolidone; 50g Benzoyl Peroxide, and 50g Benzil.