Supplier: Aladdin Scientific

Immersion oil for microscopy

Supplier: KPL

Fluorescent Mounting Media is glycerol-based and optically clear liquid for immunofluorescence microscopy

Supplier: Electron Microscopy Sciences

Handy pellet form melts rapidly.

Supplier: Electron Microscopy Sciences

A unique embedding primer.

Supplier: Biotium

EverBrite™ Mounting Media are anti-fade mountants for preserving fluorescence during microscopy

Supplier: Electron Microscopy Sciences

For some tissues, the use of formalin (contains 10 – 15% Methanol) is not suitable, we offer the alternative formaldehyde (prepared from paraformaldehyde – contains no methanol) for your convenience.

Supplier: Electron Microscopy Sciences

Reduces infiltration time by one-third. Cuts to 2 micron thickness with excellent ribbon continuity.

Supplier: Electron Microscopy Sciences

for bonding strain gages and special-purpose sensors, useful in temperatures from -452°F to +350° F (-269°C to +175°C), recommended for transducer applications up to +250°F (+120°C), Shelf Life, Post Life and Pot life:about nine months, C

Supplier: Electron Microscopy Sciences

The Crystal Clear™ series of polyurethane resins are designed for applications that require absolute clarity

Supplier: G-Biosciences

Decolorizer (Truant-Moore) reagent is used in the Fluorescent microscopic detection of mycobacteria.

Supplier: Genetex

FluoroGel is an aqueous-based mounting medium designed for the preservation of fluorescence-stained tissue sections.

Supplier: Electron Microscopy Sciences

The one glue we all know and have used.

Supplier: Electron Microscopy Sciences

This EMS Xylene Substitute solution is specially designed for use in processing and staining histological/cytological specimens. It is essentially odorless with low toxicity, less irritating to the skin than xylene- and d-limonene-based clearants. It can be substituted for xylene and can be used with almost all tissue processors and automated slide stainers.

Supplier: Avantik

Optik Type 1 Clarifier is a uniquely formulated buffer that enhances cytoplasmic details, increases cell transparency and helps eliminate background staining.

Supplier: Electron Microscopy Sciences

This mixture is less viscous than the final embedding mixture of EMbed-812.

Supplier: G-Biosciences

QuenchShield™ Mountant is glycerol based aqueous mountant, which prevents quenching of fluorescence of fluorescent labeled cells and tissues samples during fluorescence microscopy experiments. In addition, it helps preserve the fluorescence of stored slides.

Supplier: Honeywell Research Chemicals

UV-transparent, fluorescence-free immersion oil.

Supplier: Electron Microscopy Sciences

Kit consists of 500 mL LR Gold Resin, 100g Polyvinylpyrolidone; 50g Benzoyl Peroxide, and 50g Benzil.

Supplier: Electron Microscopy Sciences

Premixed, prebuffered fixatives, that are pH adjusted for immediate laboratory use. They are freshly prepared upon receipt of order to ensure maximum shelf life. The fixatives are filled in 20 mL glass vials (10 mL/vial). This allows for the immediate fixation of your specimens without costly and time consuming transfer associated with ampoule contained fixatives.

Supplier: Electron Microscopy Sciences

Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC). The fluorescence is retained during prolonged storage at 4 °C in the dark. Application: Immunofluorescence, confocal microscope.

Supplier: Leica Biosystems

Sta-On is a liquid, non-coagulating adhesive that is easy to use, convenient and reliable.

Supplier: Streck Laboratories

Easy-to-use liquid preservatives stabilize cell morphology and preserve cellular antigen expression

Supplier: Electron Microscopy Sciences

Adhesive 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many non-conductive substrates, including most plastics.

Supplier: Electron Microscopy Sciences

Slide coating cup with stand and cleaning brush. Glass cup is Pyrex and is designed to conserve expensive autoradiographic emulsion when coating glass slides. Needs only 1/4 the volume of solution previously required. Single piece holder permits immersion in a water bath and provides a stable darkroom stand to prevent spills, and faster temperature adjustment of the emulsion.

Supplier: Chemplex

Converts powdered samples into a slurry to eliminate segregation by size or density during comminution process.

Supplier: Electron Microscopy Sciences

Cargille PCB-Free Immersion oils were introduced in 1972. Today, no other immersion oil meets FDA criteria.  Now four standard types are available with the introduction of Type NVH, a very high viscosity oil. All Cargille Immersion Oils meet DIN 58 884 (Deutsche Institut Fur Normung e.V.).

Supplier: Diagnostic Biosystems

ImmunoHisto-Sealer™ is a preservation solution that acts as a sealant to improve tissue morphology and stain over an extended period of time. When applied to the stained section, specimens can be permanently mounted without chromogens fading. Additional benefits of the ImmunoHisto-Sealer™ include: saves hands on time when mounting slides, avoids the use of toxic chemicals such as xylene and eliminates accumulation of hazardous waste. This product is designed for tissue specimens stained with peroxidase, alkaline phosphatase-based systems and various chromogens. After treating with ImmunoHisto-Sealer, water solution chromogens can be mounted in Permanent Mounting Media

Supplier: Electron Microscopy Sciences

Three different mixtures: one for relatively soft blocks, another for harder blocks for collagenous tissue, and a tougher one if required., Lockwood, W.R. Anatomical Record, 150, 129 (1964). Kit consists of 2x225 ml DER 332, 225 ml DER 732, 450 ml DDSA; Specially Distilled, 50 ml DMP-30.

Supplier: Leica Biosystems

EM-400® Embedding Medium is a blend of purified paraffin with synthetic polymers that enables sectioning with minimal compression.

Supplier: Electron Microscopy Sciences

A dry temporary adhesive film, 0.003" thick, which can be easily cut to size with either a razor or scissor. This mount permits pre-placement of the adhesive film exactly where the user wants it. It melts at 195-210°F. After application it can be dissolved rapidly in trichloroethylene or toluene. This material is particularly useful in applications where a pre-formed adhesive film is needed to assure uniform bonding and flatness or in bonding stacks of substrates such as LCD glass slides for slicing. Sheet size 8"x10".