You searched for: Microscopy and staining reagents

Supplier: Diagnostic Biosystems

fading agent for fluorescent staining.

Supplier: Electron Microscopy Sciences

A high temperature conductive paint.

Supplier: Electron Microscopy Sciences

Millonig’s phosphate buffered formalin as modified by Carson, Martin and Lynn, by using 4% formalin in 0.1M sodium phosphate monobasic with sodium hydroxide to pH 7.2

Supplier: Electron Microscopy Sciences

W.P.E. number included on each bottle.

Supplier: Electron Microscopy Sciences

A special adhesive with very high electrical conductivity and permanent plasticity.

Supplier: Electron Microscopy Sciences

An aromatic polyepoxide; a colorless resin of relatively low viscosity, with virtually no shrinkage.

Supplier: Electron Microscopy Sciences

Prepared from 3-aminopropyltriethoxysilane in acetone. Good for coating glass slides to adhere paraffin sections for further processing without sections falling off from the slide. READY TO USE.

Supplier: Electron Microscopy Sciences

Water based and isopropal based graphite adhesives.

Supplier: Electron Microscopy Sciences

EMS Immuno Mount™ with anti-fading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO™) is an aqueous non-permanent low viscosity mounting medium for immunofluorescence.

Supplier: Electron Microscopy Sciences

An electrically Carbon Conductive Cement for specimen mounting in all SEM work.

Supplier: Electron Microscopy Sciences

Epo-Tek® H20S is a modified version of Epo-Tek®H20E

Supplier: Electron Microscopy Sciences

Hechman, C.A

Supplier: Electron Microscopy Sciences

HPMA is a water-soluble resin used for cytochemical applications

Supplier: Electron Microscopy Sciences

(A rapid mounting media for microscopy.) For long life preparations, without bubble formation at high ambient temperatures. It can be used for all dehydrated microscopic preparations. Cure time is 20 minutes at room temperature. It is colorless with an acid number less than 2.50 and a R.I. ND20 approx 1.49-1.5. (Contains xylene).

Supplier: Electron Microscopy Sciences

Silver adhesive in liquid and paste formats.

Supplier: Electron Microscopy Sciences

With one swift application of the EMS Tissue Capture Pen, you are able to change your plain glass slide into a coated one.

Supplier: Electron Microscopy Sciences

A mixture of xylene - mixed isomers and non hazardous ingredients to offer a very good synthetic mountant. Once dried the refractive index is 1.58.

Supplier: Electron Microscopy Sciences

This butyl acetate and acrylic resin mixture is the first mounting medium developed for coverslipping directly from d-limonene based clearants. Superior results are also with xylene. CitraMount® medium is recommended for manual coversliping only as it may cause damage to the valves of automated coverslippers.

Supplier: Electron Microscopy Sciences

This electrically conductive silver epoxy is used for adhering samples, as well as many other purposes.

Supplier: Biotium

Wet-set antifade mounting medium for preserving fluorescence of our CF® dyes and other fluorochromes, in a dropper bottle for easy dispensing.

Supplier: Electron Microscopy Sciences

Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO™) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4°C in the dark.

Supplier: Genetex

The PAP pen is a special marking pen that provides a thin film-like green-tinged hydrophobic barrier when a circle is drawn around a specimen on a slide

Supplier: Polysciences Inc

JB-4 Plus® is a unique polymer embedding system that provides a higher level of morphological detail than paraffin processed tissues

Supplier: AAT Bioquest

FluoroQuest™ TSA/PSA Antifade mounting medium is the only mounting medium that is optimized for tyramide (TSA) and styramide (PSA)-based fluorescence imaging applications.

Supplier: Electron Microscopy Sciences

Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam.

Supplier: Electron Microscopy Sciences

MWM100 Black Wax is designed for use as a masking material in jet polishing applications. As it is chemically inert, it is resistant to etching solutions such as hydrofluoric acid, perchloric acid and acetic acid. While it is resistant to many acids, it can be easily removed with hydrocarbon or chlorinated solvents.

Supplier: Electron Microscopy Sciences

MWS052 is a tan colored wax, which is translucent on thin films. Softness makes it most useful with abrasive slurry cutting of materials. Best suited to non-porous surfaces such as glass or polished metal with a reasonably large area. Easily soluble in a variety of solvents.

Supplier: Electron Microscopy Sciences

Until now, LR White has been the most commonly used embedding media for materials due to the block hardness it offered, but there are difficulties associated with LR White

Supplier: WORLD PRECISION INSTRUMENTS LLC

Vetbond is an n-butyl Cyanoacrylate adhesive that quickly and conveniently closes minor wounds. It cures in seconds after contact with tissue and body fluids and binds wound edges together so natural healing can occur.

Supplier: AAT Bioquest

FluoroQuest™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.