You searched for: Water

Supplier: GROWCELLS

Sterile molecular biology grade nuclease free water. Prepared with 18.2 megOhm, 0.1 micron sterile filtered water and autoclaved in final packaging.

Supplier: Hardy Diagnostics

Sterile Deionized Water is useful for the preparation of dilutions and suspensions.

Supplier: GROWCELLS

Distilled cell culture grade water.

Supplier: Veltek Associates

VAI WFI Quality water is a high quality water produced from validated WFI water system used for disinfectant preparation and dilution not for parenteral administration.

Supplier: Thermo Scientific

Manufactured, packaged and tested to exacting standards, these specialty waters are highly purified low TOC water in 1 L bottles or 4 L glass jugs.

Supplier: GROWCELLS

Sterile PCR grade nuclease free water. Prepared with 18.2 megOhm, 0.1 micron sterile filtered water and autoclaved.

Supplier: Zymo Research

Water DNase-, RNase-free

Supplier: GROWCELLS

Sterile molecular biology grade nuclease free water. Prepared with 18.2 megOhm water, 0.001% DEPC treated overnight, 0.1 micron sterile filtered and autoclaved in final packaging.

Supplier: Ricca Chemical

The high purity Water feedstock for this product is manufactured by a continuous process that has been validated to produce high purity Water meeting, as a minimum, ACS Reagent Grade, ASTM Type I, and ASTM Type II specifications. This high purity Water is then further purified by an added distillation step and filled into specially cleaned containers. This product has a low microbial count but is not guaranteed to be sterile. The conductivity specification for this product is equivalent to a minimum resistivity of 0.67 megohm-cm.

Supplier: Veltek Associates

Sterile water for chemical formulation, cleaning, and rinsing.

Supplier: FUJIFILM IRVINE SCIENTIFIC INC.

WFI Quality Water* meets or exceeds the testing requirements for sterile Water for Injection as stated in current USP, PhEur, and JP guidelines. Every WFI lot is tested according to USP, PhEur, and JP sterile Water for Injection standards and comes with a Certificate of Analysis.

Supplier: Decon Labs

AquaPur Purified Water has been tested to meet USP/EP specifications for purified water. Packaged in convenient point of use packaging for laboratory or production applications requiring purified water. The product is filtered to 0.2 µm and is guaranteed to meet specifications through expiration date.

Supplier: Thermo Scientific Chemicals

Water for HPLC

Supplier: QUALITY BIOLOGICAL, INC.

PCR Water is useful for PCR Assays (i.e rRT-PCR, etc.).

Supplier: MP Biomedicals

DNase & RNase Free Water.

Supplier: Cytiva

Cytiva's Water for Injection (WFI), multi-compendial grade is a terminally distilled, sterile, non-pyrogenic preparation which contains no bacteriostat, antimicrobial agent or added buffer. It complies with both USP and EP monographs for water for injection packaged in bulk for commercial use.

Supplier: Cytiva

Water for Irrigation, USP grade is a sterile, hypotonic, non-pyrogenic fluid or solvent. It is prepared by terminal distillation and contains no antimicrobial or bacteriostatic agents or added buffers. The pH is 5.0-7.0 and complies with the USP monograph for water for irrigation.

Supplier: Cytiva

Water for Injection (WFI) USP grade is a terminally distilled, sterile, non-pyrogenic preparation which contains no bacteriostat, antimicrobial agent or added buffer. It complies with the USP monograph for water for injection packaged in bulk for commercial use..

Supplier: Decon Labs

AquaPur™ Purified Water meets USP and multi-compendial specification, made for applications requiring USP/EP grade Purified Water.

Supplier: Cytiva

A universal, ultra pure water for your most sensitive research applications.

Supplier: Ricca Chemical

This product is manufactured by a continuous process that has been validated to produce high purity Water meeting, as a minimum, the specifications below at the time of packaging. This water also meets ASTM Type III and Type IV specifications.

Supplier: Thermo Scientific Chemicals

Water for analysis

Supplier: QUALITY BIOLOGICAL, INC.

DEPC Treated Water is Ultra Pure and prepared by reverse osmosis, passed through fine carbon, de-ionized through two resin beds and serially filtered 1 µm positively charged membranes. The water is subsequently treated with 0.1% (v/v) DEPC (Diethylpyrocarbonate) and incubated and heated overnight at 37°C. Finally, DEPC Treated Water is filtered through a 0.1 µm filter.

Supplier: Corning

Molecular biology grade water is ideal for a wide variety of routine tasks requiring a high degree of sterility Molecular biology grade water is ideal for the preparation of reagents, rinsing glassware and plasticware, and other molecular biology applications where RNase-, DNase-, and Protease-free water is required. No toxic agents, including DEPC, are used in the preparation of Mediatech's molecular biology grade water, eliminating possible interferences with enzymatic reactions.

Supplier: GeminiBio

GeminiBio’s Water for Irrigation (WFIr) Quality Water (USP Grade) is a hypotonic, sterile non-pyrogenic irrigating water produced by our proprietary water purification system. Manufactured and tested in compliance with the USP monograph for bulk packaged water for irrigation, GemPure™ Select Water for Irrigation (WFIr) Quality Water (USP Grade) is ideal for use in the manufacture and testing of medical devices, and applications where Water For Injection is not required.

Supplier: Thermo Scientific Chemicals

Water ACS for spectroscopy

Supplier: Ricca Chemical

Packaged in plastic. Not suitable for applications requiring extremely low levels of organics. This product is manufactured by a continuous process that has been validated to produce high purity Water meeting, as a minimum, the specifications below at the time of packaging. Although this water is not distilled, it has a chemical purity equal to or better than double distilled water.

Supplier: QUALITY BIOLOGICAL, INC.

QBI’s Water, Cell Culture, WFI Quality is high quality water for use as a solvent in the preparation of cell culture media and biochemical reagents.

This water is extensively purified by reverse osmosis, subsequently deionized and passed through a filter membrane to remove particles and tested to meet the specifications found in the USP (United States Pharmacopeia) monograph for Water for Injection (WFI) for conductivity, endotoxin,and TOC. It is additionally tested for sterility, mycoplasma, and cell culture performance.

This water is tested against USP specifications, but is not intended for injection. It is only intended for research or further manufacturing use, not for diagnostic or therapeutic use.

Supplier: GROWCELLS

Used in the preparation of cell culture media and laboratory reagents.

Supplier: Rocky Mountain Biologicals

Cytiva Molecular Grade water is quality tested and certified RNase, DNase, and protease free.