Order Entry
United States
ContactUsLinkComponent
61 results for n-Hexane

You searched for: n-Hexane

Sort By
n-Hexane ≥97%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®

n-Hexane ≥97%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®

Supplier: VWR International

From the exclusive family of high-quality, competitively priced BDH Chemicals — high purity solvents for HPLC applications.

Expand 2 Items
Loading...
n-Hexane ≥99.0% (by GC), ULTRA RESI-ANALYZED® for organic residue analysis, J.T.Baker®

n-Hexane ≥99.0% (by GC), ULTRA RESI-ANALYZED® for organic residue analysis, J.T.Baker®

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

For trace organic analysis by GC and HPLC. UV cutoff 210nm. Purity based on n-hexane and saturated C6 hydrocarbons, corrected for water. Certificate of lot analysis provided.

Expand 1 Items
Loading...
n-Hexane ≥95.0% (by GC, corrected for water content) for HPLC, UHPLC, for spectrophotometry, J.T.Baker®

n-Hexane ≥95.0% (by GC, corrected for water content) for HPLC, UHPLC, for spectrophotometry, J.T.Baker®

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

For use in liquid chromatography and spectrophotometry. UV cutoff 192 nm. Lot analysis on label.

Expand 9 Items
Loading...
Expand 3 Items
Loading...

n-Hexane ≥99%, Supelco®

Supplier: MilliporeSigma

n-Hexane ≥99%, Supelco®

Expand 1 Items
Loading...

n-Hexane ≥95%, Supelco®

Supplier: MilliporeSigma

HPLC, Meets Reagent Specifications for testing USP/NF monographs

Expand 2 Items
Loading...

n-Hexane 95 GC_ASSAY_METHOD, EMPLURA®, Supelco®

Supplier: MilliporeSigma

n-Hexane 95 GC_ASSAY_METHOD, EMPLURA®, Supelco®

Expand 6 Items
Loading...

n-Hexane 99,0 GC_ASSAY_METHOD, LiChrosolv®, hypergrade LC-MS, Supelco®

Supplier: MilliporeSigma

LiChrosolv® hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode).

Expand 1 Items
Loading...

n-Hexane, LiChrosolv® for liquid chromatography, Supelco®

Supplier: MilliporeSigma

LiChrosolv* n-Hexane for liquid chromatography, CAS number 110-54-3, Chemical formula CH3(CH2)4CH3

Expand 4 Items
Loading...
Expand 1 Items
Loading...
n-Hexane, EMPARTA® for analysis, Supelco®

n-Hexane, EMPARTA® for analysis, Supelco®

Supplier: MilliporeSigma

Emparta* n-Hexane for analysis, ACS grade, Cas number: 110-54-3, Chemical Formula:CH3(CH2)4CH3, Solvent, 2500ml.

Expand 2 Items
Loading...
Expand 4 Items
Loading...

n-Hexane ≥98.50% (hexane isomers + methylcyclopentane, GC), ≥96.0% (GC)] [≥96.0% (GC)], EMSURE® Reag. Ph. Eur., ACS analysis_for, Supelco®

Supplier: MilliporeSigma

n-Hexane ≥98.50% (hexane isomers + methylcyclopentane, GC), ≥96.0% (GC)] [≥96.0% (GC)], EMSURE® Reag. Ph. Eur., ACS analysis_for, Supelco®

Expand 5 Items
Loading...

n-Hexane ≥95%, OmniSolv®, Supelco®

Supplier: MilliporeSigma

Suitable for spectrophotometry, HPLC, and gas chromatography and residue analysis. UV cutoff 195nm. Certificate of Analysis on label.

Expand 3 Items
Loading...
n-Hexane, anhydrous ≥95%, DriSolv®, Sigma-Aldrich®

n-Hexane, anhydrous ≥95%, DriSolv®, Sigma-Aldrich®

Supplier: MilliporeSigma

Packed under nitrogen. Flammable.
Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2), for use with elbow adapter, minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.* desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.

Expand 1 Items
Loading...

n-Hexane, Uvasol® for spectroscopy, Supelco®

Supplier: MilliporeSigma

Accurate analytic results in UV/VIS and infrared spectroscopy depend on the use of very pure solvents for sample preparation. The Uvasol® solvents range has been specially designed for spectroscopy and other applications requiring solvents of the highest spectral purity. The refinement process allows a greater degree of security in applications and avoids misinterpretation of analytical results caused by traces of UV, IR and fluorescence contamination. Uvasol® solvents offer best UV transmittance. In all specifications the minimum transmittance for 5 typical wavelengths are identified. Furthermore the transmittance is specified in accordance with Reag. Ph Eur and ACS.

Expand 2 Items
Loading...

n-Hexane, SupraSolv® GC-ECD/FID, Supelco®

Supplier: MilliporeSigma

SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.

Expand 3 Items
Loading...

n-Hexane ≥99.8%, SupraSolv® for GC-MS, distilled, Supelco®

Supplier: MilliporeSigma

SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results. This method is used e. g. for the analysis of dioxins and furans (PCDD/PCDF) in food and water samples or for the determination of PAH (polycyclic aromatic hydrocarbons) in food.

Expand 2 Items
Loading...

n-Hexane 95+% ACS

Supplier: Thermo Scientific Chemicals

n-Hexane 95+% ACS

Expand 2 Items
Loading...
n-Hexane ∼95% (n-hexane) for pesticide residue analysis

n-Hexane ∼95% (n-hexane) for pesticide residue analysis

Supplier: Thermo Scientific Chemicals

n-Hexane ∼95% (n-hexane) for pesticide residue analysis

Expand 2 Items
Loading...
n-Hexane 95%, ECD tested halocarbons free grade for residue analysis

n-Hexane 95%, ECD tested halocarbons free grade for residue analysis

Supplier: Thermo Scientific Chemicals

n-Hexane 95%, ECD tested halocarbons free grade for residue analysis

Expand 2 Items
Loading...
n-Hexane 97+% ACS, meets analytical specifications of Reagent Ph. Eur. for HPLC

n-Hexane 97+% ACS, meets analytical specifications of Reagent Ph. Eur. for HPLC

Supplier: Thermo Scientific Chemicals

n-Hexane 97+% ACS, meets analytical specifications of Reagent Ph. Eur. for HPLC

Expand 2 Items
Loading...

n-Hexane ≥96.0%

Supplier: TCI America

[for Liquid Paraffin Test]
CAS Number: 110-54-3
MDL Number: MFCD00009520
Molecular Formula: C6H14
Molecular Weight: 86.18
Purity/Analysis Method: >96.0% (GC)
Form: Clear Liquid
Boiling point (°C): 68
Melting point (°C): -95
Flash Point (°C): -22
Specific Gravity (20/20): 0.66

Expand 1 Items
Loading...
n-Hexane, anhydrous ≥95%, chemSeal™ for spectrophotometry

n-Hexane, anhydrous ≥95%, chemSeal™ for spectrophotometry

Supplier: Thermo Scientific Chemicals

MDL: MFCD00009520 Beilstein Registry No.: 1730733 Notes: Same specifications as 32454

Expand 2 Items
Loading...

n-Hexane contains appr. 95% n-Hexane for analysis

Supplier: Thermo Scientific Chemicals

n-Hexane contains appr. 95% n-Hexane for analysis

Expand 3 Items
Loading...
n-Hexane 99+% for analysis

n-Hexane 99+% for analysis

Supplier: Thermo Scientific Chemicals

n-Hexane 99+% for analysis

Expand 3 Items
Loading...
n-Hexane 95+%, extra pure

n-Hexane 95+%, extra pure

Supplier: Thermo Scientific Chemicals

n-Hexane 95+%, extra pure

Expand 4 Items
Loading...

n-Hexane 95+% for HPLC

Supplier: Thermo Scientific Chemicals

n-Hexane 95+% for HPLC

Expand 2 Items
Loading...

n-Hexane 99%

Supplier: Thermo Scientific Chemicals

. Grade:99, Melting Point C-100 to -95*. Boiling Point C:68-69*. C6H14. 110-54-3. HIGHLY FLAMMABLE HARMFUL DANGEROUS FOR THE ENVIRONMENT

Expand 3 Items
Loading...

n-Hexane, anhydrous 96,0 GC_ASSAY_METHOD

Supplier: TCI America

CAS Number: 110-54-3
MDL Number: MFCD00009520
Molecular Formula: C6H14
Molecular Weight: 86.18
Purity/Analysis Method: >96.0% (GC)
Form: Clear Liquid
Boiling point (°C): 68
Melting point (°C): -95
Flash Point (°C): -22
Specific Gravity (20/20): 0.66

Expand 1 Items
Loading...
Sort By
Recommended for You