You searched for: Ethyl acetate
Ethyl acetate ≥99.8%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Supplier: VWR International
Ethyl acetate ≥99.8%, HiPerSolv CHROMANORM® for HPLC, VWR Chemicals BDH®
Expand 1 Items
Ethyl acetate ≥99.5% ACS, VWR Chemicals BDH®
Supplier: VWR International
Meets ACS Specifications for General Use
Expand 3 Items
Ethyl acetate ≥99.5% (by GC, corrected for water content), ChromAR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
For use as an HPLC and TLC Solvent. Filtered through a 0.2µm element.
Expand 1 Items
Ethyl acetate ≥99.6%, UltimAR® for liquid chromatography, for UV spectrophotometry, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Ethyl Acetate, UltimAR®
Expand 1 Items
Ethyl acetate ≥99% NF, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Ethyl Acetate, N.F.
Expand 1 Items
Ethyl acetate ≥99.5% (by GC, corrected for water content), AR® ACS, Macron Fine Chemicals™
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Ethyl Acetate, AR® (ACS)
Expand 4 Items
Ethyl acetate ≥99.9% (by GC, corrected for water content), BAKER ANALYZED® ACS, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
The quality of many BAKER ANALYZED™ Reagents meets or exceeds the requirements set forth by the American Chemical Society (ACS). These solvents are essential for any chemical stockroom.
Expand 5 Items
Ethyl acetate ≥99.6% (by GC, corrected for water content), ULTRA RESI-ANALYZED® for organic residue analysis, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
For organic residue analysis.
Expand 2 Items
Ethyl acetate, BAKER ANALYZED® for LC-MS, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
Filtered through a 0.2µm element. Lot analysis on label.
Expand 1 Items
Ethyl acetate ≥99.6% (by GC, corrected for water content), BAKER ANALYZED® HPLC for HPLC, UHPLC, for spectrophotometry, J.T.Baker®
Supplier: AVANTOR PERFORMANCE MATERIAL LLC
For high performance liquid chromatography. Packaged under nitrogen. UV cutoff 255nm. Lot analysis on label.
Expand 4 Items
Ethyl acetate, LiChrosolv® for liquid chromatography, Supelco®
Supplier: MilliporeSigma
LiChrosolv* Ethyl acetate for liquid chromatography, Cas number: 141-78-6, Chemical Formula:CH3COOC2H5, 1l.
Expand 3 Items
Ethyl acetate, EMSURE® for analysis, Supelco®
Supplier: MilliporeSigma
Emsure* Ethyl acetate for analysis, ACS, ISO, Reagent Ph Eur grade, Cas number: 141-78-6Chemical Formula:CH3COOC2H5, 4l.
Expand 1 Items
Ethyl acetate, EMPLURA®, Supelco®
Supplier: MilliporeSigma
Emplura* Ethyl acetate, Cas number: 141-78-6, Chemical Formula:CH3COOC2H5, Solvent for lab application, 2500ml.
Expand 2 Items
Ethyl acetate ≥99.9%, OmniSolv® for biosynthesis, Supelco®
Supplier: MilliporeSigma
Biosynthesis
Expand 2 Items
Ethyl acetate ≥99.8% for HPLC, Supelco®
Supplier: MilliporeSigma
HPLC, Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs
Expand 3 Items
Ethyl acetate, EMSURE® ACS, ISO, Reag. Ph. Eur. for analysis, Supelco®
Supplier: MilliporeSigma
Expand 1 Items
Ethyl acetate ≥99.8% (by GC), LiChrosolv®, hypergrade for LC-MS, Supelco®
Supplier: MilliporeSigma
LiChrosolv® hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode).
Expand 1 Items
Ethyl acetate ≥99.5% (by GC), EMSURE® ACS, ISO, Reag. Ph. Eur. for analysis, Supelco®
Supplier: MilliporeSigma
Expand 5 Items
Ethyl acetate ≥99.9% (by GC), OmniSolv®, Supelco®
Supplier: MilliporeSigma
For spectrophotometry, chromatography, and residue analysis. UV cutoff 254nm. Certificate of Analysis on label.
Expand 4 Items
Ethyl acetate ≥99.5% (by GC), GR ACS, Supelco®
Supplier: MilliporeSigma
Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs
Expand 6 Items
Ethyl acetate, SupraSolv® for GC-ECD/FID, Supelco®
Supplier: MilliporeSigma
SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Expand 2 Items
Ethyl acetate, anhydrous ≥99.8%, DriSolv®, Supelco®
Supplier: MilliporeSigma
Flammable.
Elbow adapter with septum cap (EM-692004-2) allows for the removal of solvent under nitrogen atmosphere. Replacement septum (EM-692004S-2), for use with elbow adapter, minimizes air and moisture intrusion once the primary septum is punctured. Drying tube (EM-692010-2) filled with t.h.e.* desiccant indicating silica gel removes solvent under a dry-air atmosphere. Large plug (EM-692012-2) is a replacement plug for bottle top.
Expand 2 Items
Ethyl acetate ≥99.8%, SupraSolv® for GC-MS, distilled, Supelco®
Supplier: MilliporeSigma
SupraSolv® MS is dedicated for use in gas chromatography coupled with mass spectrometric detection. SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results. This method is used e. g. for the analysis of dioxins and furans (PCDD/PCDF) in food and water samples or for the determination of PAH (polycyclic aromatic hydrocarbons) in food.
Expand 2 Items
Ethyl acetate, Uvasol® for spectroscopy, Supelco®
Supplier: MilliporeSigma
Accurate analytic results in UV/VIS and infrared spectroscopy depend on the use of very pure solvents for sample preparation. The Uvasol® solvents range has been specially designed for spectroscopy and other applications requiring solvents of the highest spectral purity. The refinement process allows a greater degree of security in applications and avoids misinterpretation of analytical results caused by traces of UV, IR and fluorescence contamination. Uvasol® solvents offer best UV transmittance. In all specifications the minimum transmittance for 5 typical wavelengths are identified. Furthermore the transmittance is specified in accordance with Reag. Ph Eur and ACS.
Expand 2 Items
Ethyl acetate 99.5% for analysis
Supplier: Thermo Scientific Chemicals
Ethyl acetate 99.5% for analysis
Expand 4 Items
Ethyl acetate 99+%, extra pure
Supplier: Thermo Scientific Chemicals
Ethyl acetate 99+%, extra pure
Expand 5 Items
Ethyl acetate 99.5+% for HPLC
Supplier: Thermo Scientific Chemicals
Ethyl acetate 99.5+% for HPLC
Expand 3 Items
Ethyl acetate 99%
Supplier: Thermo Scientific Chemicals
Acetic acid ethyl ester. Grade:99, Melting Point C-83*. Boiling Point C:76-77*. C4H8O2. 141-78-6. HIGHLY FLAMMABLE IRRITANT
Expand 3 Items
Ethyl acetate ≥99.9% for HPLC, for spectrophotometry, Burdick & Jackson™
Supplier: Honeywell Research Chemicals
Ethyl Acetate, Cas number: 141-78-6, Structural formula: CH3COOCH2CH3, Molecular weight: 88.11, Synonym: Ethyl Ethanoate, Acetic Acid Ethyl Ester, Form: liquid, clear, Color: colourless, Odor: fruity, Boiling point: 77.1C, Applications: HPLC, Spectrophotometry, Size: 200 L SSPDS
Expand 2 Items
Supplier: VWR International
Supplier: Janitorial Supplies
Supplier: VWR International
Supplier: Janitorial Supplies
Supplier: VWR International
Supplier: VWR International
Supplier: Kimberly-Clark
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: New Pig
Supplier: VWR International
Supplier: VWR International