You searched for: Hollow Cathode Lamps

Supplier: PerkinElmer

Single Element Lumina™ Hollow Cathode Lamp (HCL) for the detection of elemental Yttrium (Y). Series N30501XX Lumina™ 2" (50 mm) diameter single-element lamps are designed to be used with our PinAAcle™ and AAnalyst™ atomic absorption spectrometer series of instruments.

Supplier: PerkinElmer

Multi-element Lumina™ Hollow Cathode Lamp (HCL) for the detection of elemental Copper (Cu), Iron (Fe), and Nickel (Ni). Series N30502XX Lumina™ 2" (50mm) diameter multi-element lamps are designed to be used with PerkinElmer PinAAcle™ and AAnalyst™ Atomic Absorption (AA) spectrometer series of instruments.

Supplier: PerkinElmer

Single Element Lumina™ Hollow Cathode Lamp (HCL) for the detection of elemental Thallium (Tl). Series N30501XX Lumina™ 2" (50 mm) diameter single-element lamps are designed to be used with our PinAAcle™ and AAnalyst™ Atomic Absorption spectrometer series of instruments.

Supplier: PerkinElmer

Single element Lumina™ hollow cathode lamp (HCL) for the detection of elemental Tantalum (Ta). Series N30501XX Lumina™ 2" (50 mm) diameter single-element lamps are designed to be used with our PinAAcle™ and AAnalyst™ Atomic Absorption spectrometer series of instruments.

Supplier: PerkinElmer

Series N30502XX Lumina™ 2" (50 mm) diameter multi-element lamps are designed to be used with the PinAAcle™ and AAnalyst™ Atomic Absorption spectrometer series of instruments.

Supplier: PerkinElmer

System 2 electrodeless discharge lamp for the detection of elemental Rubidium (Rb). System 2 Electrodeless Discharge Lamps (EDLs) provide the optimized spectral output needed to get the maximum performance from , PerkinElmer® Atomic Absorption spectrometers.

Supplier: PHOTRON PTY LTD.

Photron's P900 (51mm or 2.0” Diameter) series is designed for direct use in AAS systems manufactured by PerkinElmer.

Supplier: Electron Microscopy Sciences

Lanthanum Hexaboride is the optimum cathode material for use in SEM, TEM, X-Ray Microanalysis, and Electron Beam Lithography.

Supplier: PHOTRON CA

Hollow cathode lamps produced by Photron are designed and manufactured to achieve all of the following fundamental requirements for a spectral line source: Intense emission of resonance (ground state derived) lines. Narrow line width, for maximum sensitivity and linearity. Minimal spectral interference from continuum emission, present in the cathode. Rapid warm up to produce stable long term light emission. Noise free operation. Long running life and a 5 year shelf life. Cathode materials and geometry achieve a combination of spectral purity and a suitable sputtering rate. (A high sputtering rate will give high intensity at the expense of lamp life, sensitivity and linearity).

Supplier: Electron Microscopy Sciences

For applications with large beam spot sizes, where large total current and current density are required, large, flat crystal faces of LaB6 or CeB6 can be the cathodes of choice.

Supplier: Electron Microscopy Sciences

The new improved Kimball Physics Model ES-423E (Extended Life) LaB6 Cathode is a high performance, resistively heated, thermionic electron source. The improvement stability of the LaB6 crystal, results in less exposure of LaB6, which reduces Wehnelt aperture contamination. It is for use in Scanning Electron Microscopes, Transmission Electron Microscopes, Electronlithography Systems, and X-Ray Sources.