You searched for: Fume Hoods and Enclosures

Supplier: Labconco

SoLo™ hydraulic base stand for Labconco Class II Biosafety cabinets, optic white.

Supplier: HEMCO CORPORATION

This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. Hood is ideal for laboratories that require multiple locations or where space is limited. Equipped with 115V exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Filters, worksurface, and base stands are available separately.

Supplier: Labconco

IV bar for Logic, mounting hardware and four hangers (two short and two long). Installation required.

Supplier: Yamato Scientific

Self-contained units ideal for use handling fine powders, chemicals and biological products.

Supplier: Erlab

Erlab’s Captair Ductless Filtering Fume Hoods and Powder Weighing Stations are 100% ductless, meaning no HVAC connection to the outside is required. Some models can be placed on mobile bases to be wheeled around, or shared between laboratories. The units offer end users protection from particulate, and or liquid handlings. Units are also cleanroom compliant with HEPA at the exhaust. Customers can weigh down to six decimal places without interruption of the scale.

Supplier: Eagle Group

Stainless steel laboratory exhaust canopies are used to exhaust laboratory work spaces.

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood

Supplier: Analytik Jena US

These PCR UV hoods bring together UV irradiation and antimicrobial stainless steel and aluminum to create a dual-attack environment against PCR contaminations.

Supplier: Labconco

Enclosures provide a controlled environment in which to perform polymerase chain reaction (PCR) procedures

Supplier: Labconco

PuriCare Open Access Stations offer the utmost efficiency for cage changing operations

Supplier: Labconco

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: Labconco

During procedures such as nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained

Supplier: Labconco

Purifier® Logic®+ Type A2 biosafety cabinets with large sash opening create a particulate-free environment for small animal research activities such as cage changing, weighing, anesthesia delivery and surgical procedures.

Supplier: Labconco

Cell logic Class II, Type B2 Biosafety Cabinets (BSCs) offer comprehensive personnel, product and environmental protection from hazardous particulates, including risk group agents requiring BSL 1-4 containment. Type B2 BSCs, sometimes referred to as 100% exhaust or total exhaust BSCs require a dedicated exhaust system and remote blower for each cabinet. Cell Logics are designed to meet the specific needs of cell research. Models feature a modified sash to accommodate a microscope and/or a temperature-controlled work area on the work surface to maintain cell viability. All models ensure the highest standard of safety and performance.

Supplier: Ace Glass

Although ultrasonic vibrations are above the human audible range, in ultrasonic processing, high-pitched noise is produced from harmonics emanating from the vessel walls and the fluid surface

Supplier: Labconco

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: Beckman Coulter

Class II Type biosafety containment cabinet designed specifically for the CytoFLEX SRT in collaboration with Baker Corporation, including aerosol evacuation functionality.

Supplier: Erlab

Erlab’s CaptairBio PCR Workstations are designed to protect sensitive biological applications against both environmental pollution and cross-contamination. The HEPA filter will bring clean air down to the work surface, with high efficiency UV lights to decontaminate the worktop from biological cross-contamination.

Supplier: AIRCLEAN SYSTEMS BE

AirClean Systems PCR workstations with UVTect microprocessor control allow you to maintain a clean work area during PCR preparation

Supplier: Ward's

The SureAir™ is designed to keep your workspace clean, easy-to-use and organized.

Supplier: GRANT USA INC.

The UVT-B-AR is an economical general purpose PCR UV cabinet in for carrying out short-term procedures

Supplier: GRANT USA INC.

The UVT-S-AR is a large capacity stainless steel PCR UV cabinet workstation with additional space for equipment and accessories to allow for more comfortable and convenient working in PCR applications.

Supplier: Plas-Labs

Designed to improve the accuracy of PCR and general tissue culture procedures

Supplier: GRANT USA INC.

The UVC/T-M-AR is an efficient general purpose stainless steel PCR UV cabinet workstation for carrying out short-term procedures.

Supplier: Labconco

Logic Class II, Type B2 Biosafety Cabinets (BSCs) offer comprehensive personnel, product and environmental protection from hazardous particulates, including risk group agents requiring BSL 1-4 containment. Type B2 BSCs, sometimes referred to as 100% Exhaust or Total Exhaust BSCs, maintain a minimum average airflow velocity of 100 feet per minute (fpm) through the sash opening and require a dedicated exhaust system and remote blower for each cabinet. All models are NSF-Listed, ensuring adherence to the highest safety standards.

Supplier: Labconco

Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 conditions and protect your work from particulate contamination.

Supplier: Labconco

The Logic® Vue is a specialized Class II enclosure providing personnel and product protection for large automated instruments such as liquid handlers. The Logic® Vue provides laminar ISO 5 air.

Supplier: Labconco

These ADA-compliant base stands support up to 453.6kg (1000lbs.).

Supplier: Labconco

The roughing prefilter removes large particles to extend the life of the Neutrodine Filters (and HEPA Filters, if used)

Supplier: Labconco

PuriCare procedure stations offer comprehensive personnel, product and environmental protection from hazardous particulates, including risk group agents requiring BSL 1-4 containment. These Class II, Type A2 biosafety cabinets are ideal for small animal research activities including surgical procedures, cage changing, weighing, and anesthesia delivery. All models ensure the highest standard of safety and performance and are listed to NSF/ANSI 49.