Sterilization Indicators

Changing appearances in color or pattern, the sterilization indicators visually show if cleaning conditions are passing or procedures have been completed. Eliminating any confusion or possibility instruments will not be sterile, indicators are used routinely in clinical and research environments where contamination elimination is crucial. With the temperature resistance required to endure the purification, the sterilization indicators are available in different forms such as tapes, ampoules, and sticks.

115 Results

Sort by

Chemdye® Multi-Variable Chemical Indicator for Hydrogen Peroxide (FDA)

Supplier: TERRAGENE

Multi-variable chemical indicator, strips printed with indicator ink, (105×18 mm), for plasma or vaporized hydrogen peroxide sterilization processes. Turns from purple to green.

Expand 1 Items

Cintape® Self-Adhesive Indicator Tape for LTSF

Supplier: TERRAGENE

Indicator tape for formaldehyde sterilization processes.

Expand 1 Items

Comply™ Bowie-Dick Plus Test Packs, 3M™

Supplier: Healthcare Products

Comply™ Bowie-Dick test packs are used to monitor the performance of vacuum-assisted 132 to 134 °C (270 to 273 °F) steam sterilizers.

Expand 2 Items

Attest™ Rapid Readout Biological Indicators, 3M™

Supplier: Healthcare Products

Attest™ Rapid readout self-contained biological indicator is a dual readout system specifically designed for rapid and reliable monitoring of steam sterilization process.

Expand 2 Items

Steraffirm™ Bowie-Dick Test Pack, STERIS®

Supplier: Steris

Test packs consist of preassembled single-use test packs designed to evaluate the performance of the air removal system of a pre-vacuum equipped sterilizer.

Expand 1 Items

CleanMark® Cleanroom Labels, Sterilization Indicating, Lgi

Supplier: Lgi

Chemical/abrasion cleanroom labels are recommended for use in critical environments. The labels withstand moisture, chemical exposure, and extreme temperatures without smearing, cracking, or fading while maintaining adhesion throughout the sterilization process.

Expand 1 Items

Chemsurf® Vapor Plasma Airborne Disinfection Dosimeter

Supplier: TERRAGENE

3D chemical indicator for the control of disinfection processes of environments and surfaces by hydrogen peroxide vapor. Initial color: red, final color: yellow. 100 units, 5 seals and 5 supports per container.

Expand 1 Items

Integron® Chemical Integrator for Steam (FDA)

Supplier: TERRAGENE

Moving front chemical integrator to monitor Steam sterilization processes between 118 and 138 °C. ISO 11140-1 Type 5.

Expand 1 Items

Chemsurf® Aerosol Plasma Airborne Disinfection Dosimeter

Supplier: TERRAGENE

3D chemical indicator for disinfection processes control of environments and surfaces by HydrogenPeroxide aerosol H₂O₂. 10.5 cm side and 9.0 cm high (approximate). 100 units, 5 seals and 5 supports per container.

Expand 1 Items

VERIFY™ Dual Species Self-Contained Biological Indicators, STERIS®

Supplier: Steris

VERIFY™ Dual Species Self-Contained Biological Indicators (SCBIs) are designed for use in monitoring steam sterilization and ethylene oxide (EO) sterilization processes.

Expand 2 Items

Bionova® Self-Contained Spore Ampoules for Steam (10⁶ Spores/0,25 ml)

Supplier: TERRAGENE

Self-contained spore ampoules for monitoring industrial steam sterilization of liquids. Geobacillus stearothermophilus (ATCC 7953) 10⁶ spores per ampoule (7×27 mm). 0.25 ml of culture medium. 200(+)+20(-)/BX.

Expand 1 Items

Bionova® 2 h Biological Indicator for LTSF

Supplier: TERRAGENE

Rapid self-contained biological indicator for formaldehyde sterilization processes. Geobacillus stearothermophilus (ATCC® 7953) 10⁶ spores per vial. Readout: 2 hours.

Expand 1 Items

Bionova® Spore Ampoule for Dry Heat Sterilization Processes

Supplier: TERRAGENE

Spore ampoule for dry heat sterilization processes. Bacillus atrophaeus (ATCC® 9372). 10⁶ spores per ampule. Each box of 50 ampules. Readout: 72 hours. The contents of the ampoule should be incubated in the Bionova® MC1020-2 culture medium tube or a culture medium suitable for the growth of Bacillus atrophaeus ATCC® 9372.

Expand 1 Items

Bionova® Spore Strips for Dry Heat, Steam and Ethylene Oxide

Supplier: TERRAGENE

Spore strips biological indicator for steam, ethylene oxide and dry heat sterilization processes. Geobacillus stearothermophilus (ATCC® 7953) 10⁶ and Bacillus atrophaeus (ATCC® 9372) 10⁶ spores per strip. Readout time 24/48 hours. It is suggested the use of Bionova® MC1020-2 culture medium.