You searched for: Microplate Seals

Supplier: VWR International

These easily-pierceable 94.1 µm polyethylene films with acrylic adhesive allow direct sample recovery with single or multichannel pipettors and robotic probes.

Supplier: VWR International

50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. Especially suited for qPCR, storage and protein crystallisation applications. The encapsulated silicone adhesive is non tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat resistant seal around each well on the plate.

Supplier: VWR International

Identical to polyester films above, but including a colour dot and white writing area on each end tab for plate identification.

Supplier: VWR International

Aluminium foils, 75.7 µm thick, for use with 96- or 384-well plates. Fit inside the rim of raised rim plates. These foils have one partial-width end tab. Available non sterile only.

Supplier: VWR International

A 139.7 µm thick hydrophobic porous film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packaged in tamper evident bags of 25.

Supplier: Ritter, part of Avantor

J.T.Baker®, Microplate seal, Mat (48 wells), Single sheet/mat/strip, Capmat for J.T.Baker® Plate Square Well 48, Well top shape: Square, EVA, Transparent, Pierceable, Nonsterile

Supplier: Ritter, part of Avantor

Suitable to use with J.T.Baker® Plate Medio 43001-0101, 43001-0102 or 43001-0103.

Supplier: Ritter, part of Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: Zymo Research

Covers are available in packs of 2, 4, or 8.

Supplier: Corning

Axygen® ImpermaMat sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. ImpermaMats are chemically resistant, reusable sealing mats, that provide a high degree of confidence.

Supplier: Corning

Sealing films are ideal for 96-well, 384-well, deep well, and other assay and PCR plates.

Supplier: Thermo Fisher Scientific

The polyolefin acrylate sealing tapes minimize evaporation and protect samples from contamination and spilling.

Supplier: AZENTA US, INC

These strips of 8 flat crystal clear optical caps are designed for low volume applications such as low volume qPCR.

Supplier: Corning

Platemax pierceable aluminum heat sealing film for storage applications. 100 films per box, 5 boxes per case.

Supplier: AZENTA US, INC

The clear weld heat seal is an optically clear polymer film forms a permanent complete seal to polypropylene plates, enabling both low and very high temperature uses, including low temperature storage and high temperature incubations.

Supplier: Thermo Scientific

These sealing mats are placed directly on the microplate by hand or with an applicator.

Supplier: Thermo Scientific

Save time and minimize the risk of cross-contamination with Thermo Scientific™ SureSTART™ Level 3 WebSeal™ 96-well plate sealing mats for well plate kits. Select SureSTART Level 3 products for ultimate performance and sensitivity from your methods while maintaining the highest levels of sample security and integrity.

Supplier: AZENTA US, INC

The peel heat seal is a laminate seal compatible with polypropylene plates, suitable for low temperature storage, high temperature uses and PCR.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: Thermo Fisher Scientific

These caps are for use with 0.5 ml U96, 0.45 ml V96, and 1.0 ml and 2.0 ml deep well polypropylene plates.

Supplier: AZENTA US, INC

The PCR aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity.

Supplier: Thermo Fisher Scientific

The clear polyester acrylic tape is pierceable by pipette.

Supplier: Corning

Easy application and removal for short and long-term storage. Provides tight seal to minimise evaporation and condensation.

Supplier: AZENTA US, INC

The strong heat sealing foil is peelable from COC plates, pierceable, suitable for PCR, sample shipping and compound storage.

Supplier: AZENTA US, INC

The adhesive PCR seal is a durable transparent polyester film with a strong adhesive layer. Recommended for PCR, qPCR, and other optical applications.

Supplier: Thermo Fisher Scientific

Polyester film with acrylic adhesive.

Supplier: AZENTA US, INC

This seal is designed as a low-cost sealing option, and useful for temporary storage and as a cover for applications such as centrifugation.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: Thermo Fisher Scientific

Strip Caps are used for sealing 96-well plates or 8-well strips to prevent evaporation and contamination.

Supplier: Corning

Silicone septa mat for capillary sequencing of 96-well PCR plates. Mat forms a tight seal on wells but is easily accessible through septa in each well. Ideal for work on ABI multi-capillary sequencing instruments.