You searched for: Microplate Seals

Supplier: Electron Microscopy Sciences

Titer-Tops prevents sample evaporation, well to well contamination, external contamination and sample spillage. Titer-Tops are made from 4.4 mil polyethylene film with an FDA approved non cytotoxic acrylic adhesive.

Supplier: Excel Scientific

With a 70 m top layer and inert white polypropylene and acrylic adhesive sub layer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes.

Supplier: DWK Life Sciences (KIMBLE)

A comprehensive line of 96-well microplates for chromatography, the Plate Sampling System™ uses closures familiar to those who work with standard chromatography vials.

Supplier: Excel Scientific

SealPlate ColorTab adhesive sealing films consist of 50 m thickness clear polyester. They minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal for ELISA, EIA, and similar assays.

Supplier: CDS ANALYTICAL

Empore™ sealing tape pads are ideal for covering a 96-well plate during storage or transfer to another work station. They are not intended for use with auto-injectors.

Supplier: Simport Scientific

This adhesive sealing films reduce sample-to-sample or well-to-well contamination and or spill over.

Supplier: GeneMate

Silicone adhesive provides the strongest available seal for evaporation control.

Supplier: Electron Microscopy Sciences

Use sealing films to eliminate well-to-well contamination, microbial and viral contamination, and sample spillage. Non breathable membranes prevent evaporation.

Supplier: Excel Scientific

ThermalSeal RT2RR 50 m polyester sealing sealing films for real-time PCR are sized to fit within the edges of raised-rim 96-well plates. The same consistent ultra-high optical clarity as Excel's ThermalSeal RT sealing films makes possible more reproducible, reliable, and consistent DNA amplification measurements.

Supplier: Electron Microscopy Sciences

ProCrystal™ Protein Crystallization Covers: Hanging drop microtiter plate seals with unmatched drop formation and segregation and no noticeable x-ray diffraction.

Supplier: Excel Scientific

ThermalSeal RTS™ sealing films are based on 50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive.

Supplier: GeneMate

Ideal for PCR applications, storage of sample material and active agents.

Supplier: SARSTEDT INC

Film is suitable for use with ELISA and microtest plates.

Supplier: Greiner Bio-One

Cap mats are DMSO-resistant and suitable for applications requiring a removable sealer that is also exceptionally robust.

Supplier: Simport Scientific

SecureSeal™ Thermal Adhesive Sealing Film is designed for real time qPCR application and features a special pressure sensitive DMSO-resistant silicone adhesive embedded inside the film itself.

Supplier: Excel Scientific

ThermalSeal A sealing films are an advanced version of Excel Scientific's classic ThermalSeal sealing films for PCR. ThermalSeal A films consist of 50 m thick clear polypropylene with a thicker 50 m layer of a stronger adhesive formulated for improved protection against evaporation and leakage during thermal cycling.

Supplier: GeneMate

These 38 m thick dead-soft aluminum foils with proprietary chemically-resistant inert acrylic adhesive are ideal for PCR as well as storage and sealing of light sensitive compounds or reagents.

Supplier: Lonza

GelBond Film® is a transparent, flexible polyester film designed to support agarose gels. Gels cast on GelBond® Film remain permanently attached to the film through electrophoresis or immunodiffusion and all subsequent fixing, staining, destaining, and drying procedures.

Supplier: Bio-Rad

Microplate seal, Heat sealing film/foil/tape (96/384 wells), Single sheet/mat/strip, Optically Clear Heat Seal, Pack of 100

Supplier: Bio-Rad

Optical sealing tape is an adhesive-based sealing option for optical assays demanding a low-fluorescent background.

Supplier: ANALYTICAL SALES & SERVICE MS

Standard square well cap mats are madeup of thin polypropylene.

Supplier: Alkali Scientific

Ensure a tight seal for PCR plates, reusable.

Supplier: Bio-Rad

Microseal® 'B' Adhesive Seals are designed for use with thin-wall PCR plates. The aggressive adhesive layer ensures secure sample storage or transport before or after cycling. Perforated end tabs can be removed when using these seals on semi-skirted PCR plates or with automated plate handlers.

Supplier: Alkali Scientific

Seal your PCR or ELISA plates securely with ThermaSeal™ polypropylene sealing film, featuring an adhesive design and available in a pack of 100.

Supplier: Bio-Rad

Microseal® 'F' Foils are aluminized foil, thin enough to pierce with a pipet tip for recovery of samples from individual wells while providing an efficient barrier against evaporation from –70 to 105°C.

Supplier: Invitrogen

Thermo Scientific Microplate Sealing Tape is a package of pre-cut, pressure-sensitive sheets for sealing the surface of standard 96-well or 384-well microplates during incubation steps.

Supplier: HTDIALYSIS LLC MS

HTD Equilibrium dialysis adhesive film

Supplier: Bio-Rad

Microseal® 'C' Optical Seals are optically clear adhesive films designed for real-time PCR and other optical assays.

Supplier: Alkali Scientific

Keep samples securely sealed with Alkali Scientific™ 96 well sealing mats, available in packs of 50.

Supplier: Alkali Scientific

Ensure tight seals for PCR plates with 1×8-StripFilm™ Polypropylene Strip Sealing Film, provided in a pack of 400 for convenience.