You searched for: Separating Funnels

Supplier: VWR International

VWR® Squibb Seperating funnels are made from Borosilicate 3.3 glass, ASTM 438, Type 1, Class A standard

Supplier: Glassco

Separating funnels are available with either glass or PTFE stopper.

Supplier: VWR International

Resists Virtually All Chemicals

Supplier: Glassco

Funnels are available with either glass or PTFE stopper.

Supplier: DWK Life Sciences (KIMBLE)

Funnels are designed with a large lower stem diameter to allow more complete separation.

Supplier: DWK Life Sciences (KIMBLE)

The sharp separations in these funnels are provided for by a narrow bore in the body just above the stopcock.

Supplier: Corning

PYREX® Borosilicate glass.

Supplier: DWK Life Sciences (KIMBLE)

Micro separating funnels manufactured from 33 expansion, low extractable borosilicate glass

Supplier: DWK Life Sciences (KIMBLE)

Squibb separatory funnel with heavy duty drip joint at the bottom.

Supplier: Corning

PYREX®, borosilicate glass, with glass stopper.

Supplier: Corning

PYREX® borosilicate glass, teflon stopcock, HDPE stoppers.

Supplier: SP Industries

Separating Funnels, Capacity: 250 ml

Supplier: Corning

Borosilicate glass funnels feature an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied with a PTFE valve assembly and GL screw cap with PTFE-faced silicone liner. No stopper.

Supplier: SP Industries

These borosilicate glass pear-shaped separatory funnels are supplied with a Standard Taper glass stopper and a Standard Taper glass stopcock.

Supplier: Wards

Pear-shaped separating funnel made of borosilicate glass with a 1000 ml capacity, featuring pressure equalizing capabilities, a 29/32 plastic stopper, and a PTFE key stopcock, providing optimal control and efficient liquid separation.

Supplier: Wards

Graduated Squibb separating funnel made of borosilicate glass with a 500 ml capacity, equipped with a 24/29 plastic stopper and glass key stopcock, enabling precise separation and extraction techniques in laboratory experiments.

Supplier: Thermo Fisher Scientific

Funnels are non-stick, break-resistant, and can be used in radiological and hazardous separations

Supplier: Heathrow Scientific

Our separatory funnels are an excellent tool for liquid-liquid extractions, phase separations, and chemical processes in laboratories.

Supplier: Wards

Ungraduated Gilson separatory funnels with ground cones, plastic stoppers, and glass key stopcocks, made of borosilicate 3.3 glass.

Supplier: Corning

Complete

Supplier: Ace Glass

Large separatory funnel for use where large volumes are needed

Supplier: DWK Life Sciences (KIMBLE)

Funnel is supplied with a [ST] ground glass stopcock and stopper

Supplier: Ace Glass

European style funnel with a new leak-tight, locking stopper that will not fall out during shaking or transportation

Supplier: SP Industries

These borosilicate glass pear-shaped separatory funnels are supplied as a funnel only or with Standard Taper glass stopper/stopcock and a PTFE plug.

Supplier: Ace Glass

Threaded stopcock with PTFE plug permits smooth needle valve adjustment down to 0.1 mL/min

Supplier: DWK Life Sciences (KIMBLE)

KIMAX® KimCote® plastic-coated, pear-shaped funnel.

Supplier: Ace Glass

This funnel is for use with threaded jointed heads

Supplier: DWK Life Sciences (KIMBLE)

Funnel is supplied with a [ST] ground glass stopper and a PTFE stopcock

Supplier: Ace Glass

Cylindrical with standard taper joint top and bottom, drip stem, pressure equalizing arm and double scale graduations, calibrated from stopcock

Supplier: Ace Glass

This separatory funnel type flask has three reinforced necks and a PTFE plug (6mm bore on 5000 mL, 4mm bore on all other sizes) stopcock bottom outlet