Supplier: Desco

These aluminized moisture barrier bags are designed to provide a static safe environment for sensitive electronic devices.

Supplier: Labplas

The SANI-STICK is designed to collect samples to detect the presence of microbiological contaminations on any surface.

Supplier: Ampac Flexibles

Ampac's SilverPAK is a 2ply structure consisting of metalized polyester and polyethylene (METPET/PE).

Supplier: Desco

ESD pocket protectors are made of clear, dissipative polyvinylchloride (PVC).

Supplier: BAG PACKAGING CORPORATION

Seamless; may be heat sealed. 2 mil. Size: 12×16".

Supplier: Electron Microscopy Sciences

Paper Bio-Bags are used to keep biopsies safe and secure. They are easy to load and open.

Supplier: Sakura Finetek

White nylon mesh tissue bags allow unrestricted fluid movement and protect specimens during processing.

Supplier: Com-Pac

For transporting and handling of diagnostic specimens.

Supplier: Elkay Plastics

This is choice when static control is necessary, but Faraday cage protection is not required.

Supplier: Globe Scientific

The special glue closure of our specimen transport bags offer a liquid-tight tamper evident seal.

Supplier: KNF Cleanroom Products

Nylon 6 Ultraclean Film™ material is certified to Level I cleanliness standards and features superior gas barrier properties, and resistance to heat, oil and grease, abrasion, wear, and puncture.

Supplier: KNF Cleanroom Products

This tough yet flexible film is made of low-density, puncture-resistant polyethylene Ultraclean Film™ for applications requiring Level II (poly) and III (antistatic poly) packaging cleanliness.

Supplier: Therapak, LLC

Aqui-Pak™ was designed for the safe transport of laboratory specimen tubes by keeping the tubes separate and providing cushioning at the same time.

Supplier: Dynalon

Transparent general-use plastic bags.

Supplier: ULINE

This bag safeguards electronic components from static build-up.

Supplier: Electron Microscopy Sciences

Bags are made up of porous paper which provides maximum tissue safety during processing.

Supplier: Globe Scientific

These bags are designed for the safe transportation of specimens and documentation.

Supplier: Seco Industries

Transparent, metalized static shielding creates a Faraday Cage effect with E.M.I.

Supplier: Desco

This aluminized moisture barrier bag is designed to provide packaging for ESD and moisture sensitive items, both inside and outside an ESD protected area.

Supplier: KNF Cleanroom Products

This low-density polyethylene film is certified to Level II cleanliness standards.

Supplier: Liberty Packaging & Extruding

Clear polyethylene film of Level 10000 or Level 100 specification are made with a proprietary blend of resin referred to as barefoot. Each piece of film is measured, blown and wiped to meet the level 100 criteria.

Supplier: Com-Pac

Economical pouch features six 5 cm (2") test tube-sized compartments to keep test tubes separated.

Supplier: SAF-T-PAK INC MS

Secondary pressure vessels are pressure tested to hold an internal pressure differential of 95 kPa without leaking. The product is a two-part system consisting of an inner outer envelope they are stronger than today’s present technology.

Supplier: Cytiva

Designed for use with WAVE Bioreactor systems, the Cellbag bioreactors are presterilized, single-use bags for noninvasive cell cultivation in research, development, and commercial manufacturing operations.