You searched for: Adapters

Supplier: Chemglass

This gas inlet adapter features a 2 mm glass stopcock having a constant pressure retension device.

Supplier: Kemtech America

Use to fit leak-tight apparatus together in the laboratory.

Supplier: Kemtech America

Use this vacuum adapter with glass stopcock for regulating the flow of gases or liquids into reaction systems.

Supplier: Chemglass

Adapter permits vessels to be purged with an inert gas during sampling or transfer with a cannulas.

Supplier: Kemtech America

Adapter, with no. 15 O-ring joint to 14/20, 19/22, or 24/40 inner joint.

Supplier: Chemglass

Adapters have two hose connections 180° from one another to permit a flow of inert gas over the apparatus.

Supplier: Chemglass

Adapter is ideal for eliminating stress between standard joints.

Supplier: Kemtech America

The flushing adapter is used to flush and fill attached vessels.

Supplier: Chemglass

Gas inlet adapter with a tube extending 200 mm below the inner joint.

Supplier: Chemglass

Flow control adapter for use with CG-1188 and CG-1189 chromatography columns along with CG-1190 reservoirs.

Supplier: Kemtech America

The flushing adapter is used to flush and fill attached vessels.

Supplier: Chemglass

A (0 to 12 mm) Chem-Vac™ Chem-Cap® valve with an O-Ring joint for connection to the right-hand side of (80064-398) vacuum manifold.

Supplier: Chemglass

Flow control adapter, used to regulate the flow of gases or liquids into reaction systems.

Supplier: Chemglass

Provides a convenient way to connect sanitary fittings and adapters to Chemglass reaction systems.

Supplier: Chemglass

With standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint.

Supplier: Chemglass

Vapor tube/bump trap adapter is designed to be used with the Buchi® R-200/205 rotary evaporators.

Supplier: Chemglass

This adapter permits the addition of solids into multi-neck flasks in a dry box, or the addition of non-air sensitive compounds into flasks while purging with an inert atmosphere.

Supplier: Chemglass

Adapters are used to connect dissimilar standard taper joint sizes.

Supplier: Kemtech America

This flow control adapter is designed for use with chromatography columns with a 24/40 or 45/50 inner Rodaviss® joint.

Supplier: Kemtech America

Adapter has a metering stopcock between top and bottom [ST] joints to permit flow control of fluids between apparatus.

Supplier: ACCU-SCOPE INC SE

Microscope camera adapters are designed to fit ACCU-SCOPE's EXC-400, EXC-350, 3001-LED or 3001 microscopes.

Supplier: Chemglass

Used in the transfer of fluids from vessels having standard taper joints.

Supplier: Chemglass

Vacuum adapter has a ground glass standard taper outer joint on top that provides a convenient leak-free way to connect to disposable long stem filter funnels and a taper inner joint or vial.

Supplier: Chemglass

Similar to flushing adapter but having a top outer joint and lower inner joint of the same size.

Supplier: Kemtech America

Drying tube adapters are used for keeping a reaction vessel free of moisture.

Supplier: Kemtech America

Drying tube adapters are used for keeping a reaction vessel free of moisture.

Supplier: Kemtech America

Drying tube adapters are used for keeping a reaction vessel free of moisture.

Supplier: Chemglass

Adapters simplify the transfer of powders/solids from flasks into vials.

Supplier: Chemglass

With a serrated hose connection for vacuum or for the introduction of gases.

Supplier: Promega Corporation

Vacuum adapters are required for use with the Wizard® SV minicolumns for vacuum-based protocols.