You searched for: Adapters

Supplier: Ace Glass

For connecting Kimax, Pyrex, Simax or Duran 33 Expansion borosilicate glass parts to quartz

Supplier: Ace Glass

These extenders can be added to columns like 89053-076, 89053-084, or 89053-058 (and others) to increase column height

Supplier: Ace Glass

The joint is ground slightly undersize so that with sleeves in place, joint conforms to standard spherical joint dimensions.

Supplier: Ace Glass

Solid, virgin PTFE, standard taper joint inserts and Duran® flange inserts.

Supplier: Ace Glass

This is a standard taper inner ground glass joint with drip tip and ring on shank.

Supplier: DWK Life Sciences (KIMBLE)

Glassware is manufactured from 33 expansion, low extractable borosilicate glass.

Supplier: Corning

This Connecting Tube is a replacement part for the 6949M series of PYREX® Microchemistry Kits.

Supplier: Ace Glass

Flask-length glass outer joint.

Supplier: Ace Glass

These outer ground standard taper joints with external thread are used for making an “O-Ring-CAP SEAL” connection with mating inner joint.

Supplier: Ace Glass

Solid, virgin PTFE, standard taper joint inserts are designed for use with flat glass heads.

Supplier: Ace Glass

Available in two sizes, both featuring an o-ring sealed, greaseless flange with a quick release clamp.

Supplier: Ace Glass

The tubing of these full length inner joints is the same diameter as the reinforcing rings on the joint.

Supplier: Ace Glass

In addition to collecting and filtering, this vessel may be used as a crystallizer.

Supplier: Ace Glass

Use this 3-neck vacuum filtration tube for filtration of solvents and collection of precipitate.

Supplier: Ace Glass

These blanks are a flat flange lid for use with other flanges.

Supplier: Ace Glass

Connecting glass tubes for the receiver assembly are available in either poly-coated or plain, uncoated formats

Supplier: Ace Glass

Replacement borosilicate glass tubes for Buchi® R-220, R-220EX, and R-220SE rotary evaporators

Supplier: Ace Glass

The Easy Adapter allows connection of small bore tubing to Ace-Threds without having to turn vessel or tubing when removing adapter from vessel, i.e., Solvent Reservoirs.

Supplier: Ace Glass

Omnifit shutoff adapter with 1/4"-28 male thread and 1/8" PTFE tubing.

Supplier: Chemglass

Adapters are available in two bottom configuations and four top configurations.

Supplier: Chemglass

Adapters are used to construct a simple moisture trap.

Supplier: Chemglass

Bushing style adapters feature a lower standard taper inner joint and outer joint ground in the bore of the adapter.

Supplier: Chemglass

Adapter allows for ¹/₈" O.D. PTFE tubing to be connected to glassware via a standard taper joint.

Supplier: Chemglass

The offset of the adapters is measured from center to center.

Supplier: Chemglass

These bushing-style adapters are available in borosilicate glass or fluoropolymer resin.

Supplier: Ace Glass

This end-fitting adapter fits large columns with #80 Ace-Thred connections.

Supplier: Chemglass

Adapters permit the connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator.

Supplier: Chemglass

These universal adapters have a thread at the top for a compression cap and o-ring.

Supplier: Chemglass

Connecting adapters available in two different styles to best suit your needs.

Supplier: Chemglass

Adapter has a tubulation at the top for use with a CG-1040 rubber fitting.