You searched for: Vacuum Traps

Supplier: Labconco

CentriVap Cold Traps are critical components designed to collect evaporated liquid from CentriVap Vacuum Concentrators. By condensing and trapping volatile solvents, they protect the vacuum pump and the laboratory environment from the harmful effects of vapors, fumes, and corrosives, while also ensuring that solvents can be easily collected for analysis or disposal.

Supplier: Corning

These PYREX® traps are used in rotary evaporators. They have a round body with upper and lower stems.

Supplier: DWK Life Sciences (KIMBLE)

This trap is designed for use between flask and rotary evaporator to reduce carry-over from foaming or bumping.

Supplier: Ace Glass

Replacement borosilicate glass components for Buchi® R-220, R-220EX, and R-220SE rotary evaporators.

Supplier: DWK Life Sciences (KIMBLE)

Kimble® self washing top vapor tube traps with square joint bead, [ST] joints top (outer) and [ST] joints bottom (inner).

Supplier: Ace Glass

Trap design greatly reduces carry-over from foaming or bumping

Supplier: PerkinElmer

TurboMatrix thermal desorption trap supplies exceptional analytical performance, used for U.S.

Supplier: Ace Glass

Upper tubulation prevents migration of film and foam directly into the condenser

Supplier: DWK Life Sciences (KIMBLE)

The design of this trap provides for expanded volume for organic mixtures that have a tendency to foam excessively.

Supplier: DWK Life Sciences (KIMBLE)

Designed for use where foaming is likely to occur and be drawn into the condenser

Supplier: Ace Glass

This rotary evaporator trap is designed to greatly reduce carry-over from foaming or bumping.

Supplier: Ace Glass

Unique design incorporates an inverted, straight-walled expansion chamber that allows for flow-back of bumped materials.

Supplier: DWK Life Sciences (KIMBLE)

Use where foaming is likely to occur and be drawn into the condenser.

Supplier: Chemglass

Trap is designed to fit between the vacuum pump and the upper cart shelf on the 80060-050 cart to prevent oil from being drawn into the vacuum line.

Supplier: Labconco

CentriVap Cold Traps are critical components designed to collect evaporated liquid from CentriVap Vacuum Concentrators. By condensing and trapping volatile solvents, they protect the vacuum pump and the laboratory environment from the harmful effects of vapors, fumes, and corrosives, while also ensuring that solvents can be easily collected for analysis or disposal.

Supplier: Chemglass

Drying tower is designed to fit on a cart system between the vacuum and pump oil trap.

Supplier: Yamato Scientific

This space-saving unit traps water vapor and toxic substances discharged from the vacuum oven and rotary evaporator to protect the vacuum pump.

Supplier: Restek

Built-in frits retain fine particles; adsorbents remove both moisture and hydrocarbons.

Supplier: Labconco

The Liquid Trap prevents liquid from entering the pump

Supplier: GM DIECRON, INC.

Extends pump life.

Supplier: Chemglass

Trap provides expanded volume for reactions that have a tendency to foam excessively.

Supplier: DWK Life Sciences (KIMBLE)

These fritted disc sealed between the lower inner and top outer joint to prevent the contents of the flask from entering into the condenser in the event of bumping.

Supplier: Welch Vacuum

The Acid Neutralization Trap contains a large alkaline element cartridge to neutralize hydrous acids before they enter the vacuum pump

Supplier: Chemglass

Rotary Evaporator Bump Traps is used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of bumping.

Supplier: Edwards

For clean pumping systems to prevent back-migration of rotary pump oil vapor into the system

Supplier: Thermo Fisher Scientific

Nalgene Complete polyetherimide jar and vacuum plate chamber provides strength and good chemical resistance.

Neoprene gasket provides secure seal. Slight amber cast of jar allows complete visibility of interior.

Plate has a center hole for exhaust with tube leading to an external hose connector which accepts 1/4" ID tubing.

For use at room temperature and at full vacuum.

Supplier: Welch Vacuum

For coaxial trap 55009-138.

Supplier: Chemglass

Rotary evaporators featuring bump trap.

Supplier: Chemglass

Rotary evaporator Bump Traps are designed with an extra coarse fritted disc sealed between the lower inner and top outer joint to prevent contents of the flask from entering into the condenser in the event of bumping.

Supplier: Chemglass

Trap is designed to eliminate hold up common to the round style of rotary evaporator traps.