You searched for: Protein Linking and Labeling Systems
Protein linking and labeling systems provide a convenient means for attaching fluorescent labels or biotins to antibodies and larger proteins. These kits are ideal for use with multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, and FISH. These systems are available with a variety of dye colors, biotin, fluorescent agents, and all the components needed to perform multiple conjugations and purifications. Protein labeling follows a simple protocol of reaction, separation, and then use.
ReadiLink™ Rapid mFluor™ Violet 420 Antibody Labeling Kit *Microscale Optimized for Labeling 50 µg Antibody Per Reaction* (2 Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
AAT Bioquest's mFluor™ dyes are developed for flow cytometry-focused applications.
Expand 1 Items
HaloTag diAcFAM Ligand, 30 µl, Promega
Supplier: Promega Corporation
The HaloTag Technology enables covalent protein labeling and immobilization in vivo and in vitro.
Expand 1 Items
ReadiLink™ Rapid Cy7 Antibody Labeling Kit *Microscale Optimized for Labeling 50 µg Antibody Per Reaction* (2 Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
Cy7 is one of the most popular fluorescent labeling dyes for preparing orange-red fluorescent bioconjugates.
Expand 1 Items
CLIP-SURFACE® 488, New England Biolabs
Supplier: New England Biolabs (NEB)
CLIP-Surface™ 488 is a photostable green fluorescent substrate that can be used to label CLIP-tag™ fusion proteins on the surface of living cells or in vitro
Expand 1 Items
CLIP-SURFACE® 647, New England Biolabs
Supplier: New England Biolabs (NEB)
CLIP-Surface™ 647 is a photostable red fluorescent substrate that can be used to label CLIP-tag™ fusion proteins on the surface of living cells, or in vitro
Expand 1 Items
SNAP-CELL® 430 , New England Biolabs
Supplier: New England Biolabs (NEB)
SNAP-Cell® 430 is a blue fluorescent substrate that can be used to label SNAP-tag® fusion proteins inside living cells, on cell surfaces, or in vitro
Expand 1 Items
Glutathione Resin for GST Purification, G-Biosciences
Supplier: G-Biosciences
Glutathione Resin is designed for the affinity purification of proteins with a glutathione S-transferase (GST) tag. The resin consists of reduced glutathione (GSH) covalently coupled to 6% cross-linked agarose, via a 10-carbon spacer arm. The resin has a binding capacity of >40mg GST/ml resin.
Expand 4 Items
ReadiLink™ iFluor® 488 Nick Translation dsDNA Labeling Kit
Supplier: AAT BIOQUEST INC
It is compatible with a wide variety of sample materials, including bacterial artificial chromosome (BAC) DNA, human genomic DNA, purified PCR products, supercoiled and linearized plasmid DNA.
Expand 2 Items
ReadiLink™ Rapid XFD594 Antibody Labeling Kit *XFD594 Same Structure to Alexa Fluor™ 594* (2×50 µg Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
XFD594 is manufactured by AAT Bioquest, and it has the same chemical structure of Alexa Fluor® 594 (Alexa Fluor® is the trademark of ThermoFisher).
Expand 1 Items
HaloTag Oregon Green Ligand, 30 µl, Promega
Supplier: Promega Corporation
The HaloTag Technology enables covalent protein labeling and immobilization in vivo and in vitro.
Expand 1 Items
HaloTag Alexa Fluor 660 Ligand, 15 µl, Promega
Supplier: Promega Corporation
The HaloTag Technology enables covalent protein labeling and immobilization in vivo and in vitro.
Expand 1 Items
SNAP-BIOTIN®, New England Biolabs
Supplier: New England Biolabs (NEB)
SNAP-Biotin®i s a cell-permeable substrate (BG-Biotin) based on biotin with an amidocaproyl linker
Expand 1 Items
Mix-n-Stain™ Cyanine Dye Antibody Labeling Kits, Biotium
Supplier: Biotium
Revolutionary technology allows antibody labeling with Cyanine 555 (Cy®3) or Cyanine 647 (Cy®5) in 30 minutes without a purification step. The labeling procedure tolerates many common buffer components and antibody stabilizers.
Expand 7 Items
femtoCHROMO™- AP Kit for Chromogenic Detection, G-Biosciences
Supplier: G-Biosciences
G-Biosciences' femtoCHROMO™- AP kit is supplied with a single step chromogenic substrate for the rapid development of protein bands with low background staining
Expand 5 Items
Transcend Colorimetric Translation Detection System, 30 Reactions, Promega
Supplier: Promega Corporation
Non-Radioactive Translation Detection Systems for colorimetric or chemiluminescent detection of proteins synthesized in vitro. Biotinylated proteins are detected using Streptavidin-Alkaline Phosphatase or Streptavidin-HRP.
Expand 1 Items
FluoroTect GreenLys in vitro Translation Labeling System, 40 reactions, Promega
Supplier: Promega Corporation
FluoroTect Green(Lys) in vitro Translation Labeling System allows fluorescent labeling and detection of proteins synthesized in vitro. It is based on a lysine-charged tRNA labeled at the epsilon position of the lysine with the fluorophore BODIPY-FL.
Expand 1 Items
ReadiLink™ Rapid iFluor® 680 Antibody Labeling Kit *Microscale Optimized for Labeling 50 µg Antibody Per Reaction* (2 Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
AAT Bioquest's iFluor® dyes are optimized for labeling proteins, in particular, antibodies.
Expand 1 Items
ReadiLink™ Rapid iFluor® 750 Antibody Labeling Kit *Microscale Optimized for Labeling 50 µg Antibody Per Reaction* (2 Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
AAT Bioquest's iFluor® dyes are developed for labeling proteins, in particular, antibodies.
Expand 1 Items
SNAP-SURFACE® Alexa Fluor 647 , New England Biolabs
Supplier: New England Biolabs (NEB)
SNAP-Surface Alexa Fluor 647 is a photostable fluorescent substrate that can be used to label SNAP-tag® fusion proteins in solution or on the surface of living cells
Expand 1 Items
Coelenterazine Substrates for Renilla Luciferase and Apoaequorin, Biotium
Supplier: Biotium
Coelenterazine and its analogs are luminescent enzyme substrates for apoaequorin and Renilla luciferase.
Expand 39 Items
ReadiLink™ Rapid iFluor® 700 Antibody Labeling Kit *Microscale Optimized for Labeling 50 µg Antibody Per Reaction* (2 Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
AAT Bioquest's iFluor® dyes are developed for labeling proteins, in particular, antibodies.
Expand 1 Items
ReadiLink™ Rapid iFluor® 647 Antibody Labeling Kit *Microscale Optimized for Labeling 50 µg Antibody Per Reaction* (2 Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
AAT Bioquest's iFluor® dyes are optimized for labeling proteins, in particular, antibodies.
Expand 1 Items
ReadiLink™ Rapid iFluor® 790 Antibody Labeling Kit *Microscale Optimized for Labeling 50 µg Antibody Per Reaction* (2 Labelings), AAT Bioquest
Supplier: AAT BIOQUEST INC
AAT Bioquest's iFluor® dyes are developed for labeling proteins, in particular, antibodies.
Expand 1 Items
Thiol-Reactive Fluorescent Dyes and Other Thiol-Modifying Reagents, Biotium
Supplier: Biotium
MTS, TS, and maleimide, and other thiol-modifying reagents and reactive fluorescent dyes.
Expand 31 Items
BG-GLA-NHS, New England Biolabs
Supplier: New England Biolabs (NEB)
BG-GLA-NHS is an amine-reactive building block for the one-step synthesis of SNAP-tag® substrates from amine-containing precursors including proteins, peptides or oligonucleotides
Expand 1 Items
CLIP-CELL® TMR-Star, New England Biolabs
Supplier: New England Biolabs (NEB)
CLIP-Cell™ TMR-Star is a photostable red fluorescent substrate that can be used to label CLIP-tag™ fusion proteins inside living cells, on cell surfaces or in vitro
Expand 1 Items
SNAP-SURFACE® Alexa Fluor 546 , New England Biolabs
Supplier: New England Biolabs (NEB)
SNAP-Surface Alexa Fluor 546 is a photostable fluorescent substrate that can be used to label SNAP-tag® fusion proteins in solution or on the surface of living cells
Expand 1 Items
BSA Gold Tracer, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
BSA coated gold tracers are useful for detecting open connections and tissue damage.
Expand 10 Items
Buccutite™ Rapid APC-iFluor® 700 Tandem Antibody Labelling Kit
Supplier: AAT BIOQUEST INC
Production scale optimized for labelling 1 mg antibody per reaction. Buccutite™ rapid APC-iFluor® 700 tandem antibody labelling kits, designed for large-scale production, provide a streamlined approach for labelling antibodies with PE, APC, PerCP and iFluor® tandem dyes.
Expand 1 Items
HOOK™ Amine Reactive Biotin Reagents & Kits for Highly Efficient Protein Labeling, G-Biosciences
Supplier: G-Biosciences
The use of biotin for non-radioactive labeling of proteins and nucleic acids has now become an increasingly popular technique in life science research