You searched for: Distillation Components

Supplier: Ace Glass

This distillate take-off adapter has a 105° angle.

Supplier: Kemtech America

Distillation adapter accommodates a 76 mm immersion thermometer.

Supplier: Ace Glass

This microscale Hickman still head is used to carry out micro-sample fractional distillations

Supplier: Ace Glass

This Claisen-style adapter features a parallel sidearm.

Supplier: Corning

Cyanide distilling apparatus made of PYREX® borosilicate glass to determine soluble and insoluble cyanides in water.

Supplier: Corning

Made of PYREX®, borosilicate glass.

Supplier: Ace Glass

The distilling trap adapter is used to prevent carryover of reactions that have a tendency to foam.

Supplier: SP Industries

Calibrated “to contain” at 20°C, these distilling receivers are used for determination of water in various materials by distillation with a solvent that is not miscible with water.

Supplier: Ace Glass

Adapters feature a top outer [ST] joint, bottom inner [ST] joint, and side inner [ST] joint

Supplier: Corning

This PYREX® distilling apparatus is designed for determining water content in petroleum or bituminous products.

Supplier: DWK Life Sciences (KIMBLE)

Apparatus used in general purpose distillation and phenol distillation

Supplier: DWK Life Sciences (KIMBLE)

These extended 105° bent distillation adapters with vacuum take-off and outer hose connection.

Supplier: Ace Glass

This distillation head has a cold finger type condenser and 0-3mm PTFE stopcock plug with PTFE ring seals for reflux control

Supplier: Ace Glass

This apparatus comes has a [ST] 10/30 joint for a 25 mm immersion thermometer

Supplier: Ace Glass

This distillation apparatus is used for converting simple and the most complex cyanides into HCN, and for isolating cyanide from most interferences before measuring by titration or colorimetric analysis in the examination of industrial wastes and other water

Supplier: Ace Glass

This cyanide distillation apparatus is used in testing for soluble and insoluble cyanides in water

Supplier: Ace Glass

Replacement borosilicate glass components for Buchi® R-220, R-220EX, and R-220SE rotary evaporators

Supplier: DWK Life Sciences (KIMBLE)

For the determination of free sulfite and a reproducible portion of the bound sulfites in food, such as the carbonyl addition products.

Supplier: Ace Glass

Especially useful when heavier-than-water solvents are employed

Supplier: Ace Glass

The column length in millimeters (listed below) refers to the effective length of the column as measured from the lowest to the highest indent of the column

Supplier: Ace Glass

Arsenic Limit Test apparatus as described in the European Pharmacopeia chapter 2.4.3.

Supplier: Ace Glass

Distilling head sits on top of your vapor path column. Has condenser side arm with drip tip.

Supplier: Ace Glass

This column has a reinforced outer [ST] joint at top and a ground inner [ST] joint at bottom

Supplier: Ace Glass

This Vigreux distillation column has a male drip tip on the joint of the Claisen side arm, and a [ST] 10/30 joint for a 25mm immersion thermometer

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Kemtech America

Rotating distillation receiver allows four fractions to be collected.

Supplier: Ace Glass

Adapter's top joint is a combination cap, thread and joint to accommodate and seal other microscale apparatus.

Supplier: Ace Glass

Modified Bidwell & Sterling type with overflow to allow excess solvent to return to boiling flask

Supplier: Corning

This Hickman Still Head is a replacement part for the 6949M series of PYREX® microchemistry kits.