You searched for: Inoculating Loops and Needles

Supplier: United Scientific Supplies

Color set of four inoculating loops with brass handles and four colors.

Supplier: PRO-LAB DIAGNOSTIC

Pack of 10 µl sterile disposable plastic microbiology inoculation loops.

Supplier: Bio Plas

Disposable, color-coded system for quantitive procedures such as sampling, urine counts, serial dilutions, bacteriological inoculation, and streaking

Supplier: Copan Diagnostics

Accuracy conforms to FDA Drill Bit Method

Supplier: Decon Labs

LeStreak® Microstreakers are used to inoculate or transfer microbiological samples

Supplier: Electron Microscopy Sciences

Chrome plated, 6” long. With one blunt bent end and one chisel finish on the other end.

Supplier: TONAWANDA MANUFACTURING

The 10cm wire makes it easy to reach cultures even in large culture tubes. With safety always in mind, its length also means easy, and safe, flame sterilizing.

Supplier: Electron Microscopy Sciences

Nichrome wire. An 8” aluminum handle with a 3” nichrome wire, 25 gauge. Loop O.D. is 4 mm; loop I.D. is 2.5 mm. Available with a loop or a needle.

Supplier: PRO-LAB DIAGNOSTIC

When strict calibration is required, certified/calibrated loops from Pro-Lab Diagnostics are manufactured from the highest quality 80/20 nickel chromium wire.

Supplier: Globe Scientific

Disposable loops with needles

Supplier: Chemglass

Wooden inoculation picks provide a faster way to inoculate. It’s simple, after autoclaving, just "pick" the colony, drop the wooden pick into your media and close the lid. No need to remove the pick.

Supplier: SARSTEDT INC

One aspect of microbiology is researching and identifying pathogens, as well as looking for suitable treatments. SARSTEDT provides researchers with the consumables they need to do their work.

Supplier: Electron Microscopy Sciences

Our high quality inoculating loops are made from platinum wire. The 15% iridium adds necessary rigidity permitting thinner wire for delicate work. The loop section is welded and smoothly finished to form a “perfect circle”.

Supplier: Electron Microscopy Sciences

Handle L x Diameter: 92 x 6 mm (3 5/8 x 1/4")

Supplier: Electron Microscopy Sciences

Made from 26 gauge B and S platinum wire with 15% iridium to provide rigidity with thinner wire for delicate work. Both ends are ground smooth.

Supplier: Science Center

A 3" length of 24 gauge Ni/Cr wire set in a 6" L solid aluminum handle.

Supplier: Globe Scientific

These disposable inoculation loops and needles offer the most convenient and safest way of streaking culture media.

Supplier: Electron Microscopy Sciences

Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service. Compatible with Short-Cut™ system for direct conversion to TEM grid.

Supplier: MCKESSON MEDICAL-SURGICAL INC TE

Inocculating Loops are color-coded for easy product identification and hexagonal loop shaft for easy handling.

Supplier: Copan Diagnostics

Ultra smooth loop surfaces allows easy streaking

Supplier: BD

Made of specially formulated plastic resin

Supplier: Electron Microscopy Sciences

Probe set include two-way handle and four probe heads. These probe heads (A, B, C, D) are easily screwed into the handle (H). This set is very convenient for field work or on the move.

Supplier: Electron Microscopy Sciences

Tungsten filments with a minimum tip radius for a coherent beam.

Supplier: WORLD PRECISION INSTRUMENTS LLC

For soft tissue retraction. Loop prongs. Knurled thumb screw.

Supplier: Electron Microscopy Sciences

Custom dual taper tip designed from tungsten. Tip radius is 0.5 µm with 8 to 10° taper angle for maximum lifetime service.

Supplier: Antyila Scientific

Save time and eliminate cross-contamination.

Supplier: Globe Scientific

Loops offer the most convenient and safest way of streaking culture media

Supplier: Caplugs

Precision molded 95-Pin Inoculator can simultaneously pick up 95 bacterial colony samples (10 µl/pin) and transfer them into or from a 96-well format microplate or microplate tray. The missing pin in the inoculator assembly serves as a blank control.

Supplier: Decon Labs

LeLoop®, Decon’s inoculating loops, are made of high-quality, twisted nichrome wire which is designed to cool rapidly after flaming.

Supplier: Electron Microscopy Sciences

Disposable Incubation Loops and Needles