You searched for: Presaturated Cleanroom Wipes

Supplier: Berkshire

SatPax® Polx® non-woven combines Polx non-woven wipers, composed of 100% polyester spunlace, with various saturation levels of isopropyl alcohol and DI water in an easy-to-dispense canister.

Supplier: Contec

A replacement canister for the SATWipes® 6×9" rolls saturated with IPA greater than 70%.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA pouch wipes are sterile knitted, 100% polyester wipes impregnated with 70% v/v Isopropyl alcohol blended with Water For Injection (WFI).

Supplier: Berkshire

SatPax® 1000 combines Durx® 670 non-woven wipers, composed of a hydroentangled non-woven blend of 55% cellulose and 45% polyester, with various saturation levels of isopropyl alcohol and DI water.

Supplier: Contec

PROSAT® Sterile Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than 1 EU/wipe.

Supplier: Contec

These sealed-edge wipers offer an extremely high sorptive capacity and are designed for critical sterile environments.

Supplier: Contec

These PROSAT® sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT® Sterile Sigma™ wipes offer a soft and durable wipe providing consistent solvent application.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA are sterile, knitted 100% polyester wipes impregnated with 0.2 micronfiltered IPA blended with deionized water.

Supplier: Contec

Gowning room wipes are made using a strong cellulose/polyester non-woven fabric that is folded for easy pickup and very low in extractable residue.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA (polyester/cellulose) pouch wipes are sterile low particulate, non-woven polyester/cellulose wipes impregnated with 70% v/v Isopropyl alcohol blended with Water for Injection (WFI).

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA mop wipes are ready-to-use mop wipes for cleaning and residue removal on large surfaces. Sterile non-woven, low particulate wipes impregnated with 70% v/v Isopropyl alcohol blended with Water for Injection.

Supplier: Contec

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT® Theta™ wipes offer a soft and durable wipe providing consistant solvent application.

Supplier: Contec

Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric unravelling creating an even more durable fabric with strong edges.

Supplier: Contec

PROSAT® Sterile Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning. They are laundered and packaged in an ISO Class 4 cleanroom.

Supplier: Berkshire

SatPax® 550 wipers are exceptionally clean. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk handling of solvents, maintenance of squirt bottles, and inconsistent wetting and cleaning associated with wetting a dry wiper.

Supplier: Contec

PROSAT® Sigma™ wipes consist of cellulose/polyester hydroentangled and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. They are ideal for use in life science applications.

Supplier: Contec

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric unraveling creating an even more durable fabric with strong edges.

Supplier: Contec

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, and the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric from unraveling. This creates an even more durable fabric with strong edges.

Supplier: Veltek Associates

HYPO-CHLOR® saturated wipes are designed for intricate or sensitive locations where a spray down would create residues.

Supplier: Veltek Associates

Wipes saturated with 70% USP isopropyl alcohol and 30% USP water for injection.

Supplier: Veltek Associates

Steri-Perox® wipes leave no residue and are used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, Lexan, polycarbonate, glass, and any critical surfaces that require cleaning.

Supplier: Veltek Associates

STER-AHOL® Wipes may be used as a sanitizer in classified manufacturing and testing environments.

Supplier: Veltek Associates

Process2Wipes are saturated with 70% USP isopropyl alcohol and 30% USP water for injection.

Supplier: Veltek Associates

Individually-packaged sterile wipes are a polyester blend that is inherently low in particulate and shedding features and saturated with DAS stainless steel cleaner and lubricant. DAS-Wipe 100 is designed to replace silicone on turntables, process lines and as a general lubricant to assure bottles do not stick during movement towards the critical fill site.

Supplier: Texwipe

Wipers are made from 100% continuous-filament knit polyester and are presaturated with a blend of 70% 0.2 µm filtered semiconductor-grade isopropyl alcohol and 30% deionized water.

Supplier: Texwipe

POLYSAT® wipers are made from 100% polypropylene and pre-wetted with 70% IPA.

Supplier: Berkshire

DuoClean™ wipes provide convenience, consistency, disinfectant and sterilant capabilities for cleaning a wide array of cleanroom surfaces.

Supplier: Texwipe

These convenient wipers provide portion control and reduced potential of spillage in and out of the cleanroom.

Supplier: FG CLEAN WIPES TE

Convenience, consistency, and cleanliness.

Supplier: ITW Chemtronics

High quality premoistened lens-grade tissue for cleaning optical surfaces.