Supplier: Contec

Anticon® Gold Sorb™ is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics.

Supplier: Contec

Amplitude™ Theta™ Wipes are made from a lightweight hydroentangled cellulose/polyester, which creates an economical absorbent wipe ideal for general cleaning applications.

Supplier: Contec

Anticon 100® StandardWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching.

Supplier: Contec

Anticon® White Magic™ Wipes are made from 100% continuous filament polyester with an interlock knit construction. This wipe exhibits low particle and fiber counts and provides ultra-clean wiping for critical applications.

Supplier: Contec

The Amplitude™ standard weight knitted wipes feature a soft, textured surface for effective cleaning without scratching. The wipe is laser cut, which seals the fibers at the edges.

Supplier: Contec

StatZorb® Wipes are made from polyester fabric with a conductive fiber knitted in a specially designed grid pattern that minimizes 'hot spots'. The antistatic properties are uniform on both sides of the wipe. The surface resistivity is 4.3×107. The static decay time is less than 1.5 seconds.

Supplier: Contec

Quiltec® I Wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe. Additional fluid is captured within the quilted pockets between the fabric layers, increasing the sorbent capacity. Quiltec® I have more than twice the adsorbent capacity of a single-layer wipe.

Supplier: Contec

Amplitude™ Epsilon™ Wipes are made of a special grade blue cellulose and polyester hydroentangled to form a wipe with improved cleanliness and excellent sorbency.

Supplier: Contec

MicroSilk™ II Wipes are made with fabric densely knitted by continuous microdenier filament.

Supplier: Contec

Polywipe Light Wipes are unlaundered standard weight interlock knit polyester wipes with knife-cut edges that can be used in less critical applications.

Supplier: Berkshire

MicroSeal® NW antistatic is a sealed edge knitted polyester wiper. A conductive fiber is knitted into the material to provide increased control over static.

Supplier: Contec

Amplitude™ Optic wipes are 100% nonwoven cellulose. The wipe consists of long staple fibers which are wet laid in a paper making process to form an extremely clean sheet. It features very low levels of extractables and only moderate particle generation. The wipe has a non-abrasive surface texture. The wipes are both absorbent and optical grade.

Supplier: Contec

Amplitude™ Zeta™ wipes are a 5-ply, thermally bonded wipe which is comprised of a layer of cellulose sealed between two layers of meltblown polypropylene. This creates a material which is very absorbent and has a high level of cleanliness.

Supplier: Contec

Anticon® Gold StandardWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run, interlock construction. The proprietary sealed edges reduce the amount of fibers released from the wipe.

Supplier: Contec

The Polynit Z Wipes are constructed using conductive yarns within the polyester interlock knit that feature a unidirectional conductive pattern. These are very clean static dissipative wipes that is well suited for applications sensitive to electrostatic discharge.

Supplier: Contec

Polynit heatseal low endotoxin wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges and produce low levels of particles and fibers. The polyester fabric offers the widest range of solvent compatibility. The wipes have a guaranteed endotoxin level of <1 EU/wipe and are validated sterile to 10⁻⁶ Sterility Assurance Level, making them ideal for use in product contact areas.

Supplier: Contec

Polywipe-C Wipes are made from a standardweight 100% knitted polyester that is knife cut to create a soft edge.

Supplier: Contec

The EcoCloth™ wipe has been engineered to provide greater thickness in a lighter weight material. Amplitude™ EcoCloth™ is a hydroentangled cellulose/polyester fabric with additional loft. It is lightweight but has excellent sorbency which exceeds comparable standard cellulose/polyester wipes.

Supplier: Contec

The Tax-Fre® non-woven tack wipe has been specifically engineered to provide excellent contamination removal from surfaces without sticking, grabbing, or transferring tack adhesive to the surface.

Supplier: Contec

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: Contec

Hydrophilic polyurethane foam, high sorptive capacity with low levels of extractable residues and particles. For spill cleanup or solution/solvent application.

Supplier: Contec

Anticon® Gold HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. They use patented textile technology to achieve superior sorption characteristics for critical applications.

Supplier: Contec

These sealed edge wipers with P.A.T.

Supplier: Kimberly-Clark

Low-linting wipers for ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom assembly operations, pharmaceutical operations, and other clean environments.

Supplier: Contec

Made from high-quality, unlaundered 100% continuous filament polyester.

Supplier: Veltek Associates

WipeDown is designed as a dry cleaning wipe for use during wipe downs of filling and packaging machinery, stainless steel surfaces, lexan, polycarbonate, glass and any other critical surface that requires cleaning.

Supplier: Foamtec International

These soft, nonabrasive wipers trap particulate matter in a skeletal structure designed to reduce particulate contamination.

Supplier: Foamtec International

This triple-layered wipe is designed to aid decontamination procedures in pharmaceutical and medical device manufacturing facilities.Can hold 8 to 10× the volume of fluid compared to other wipes allowing for much quicker application of cleaning fluids to large areas such as glass windows, stainless steel tanks and piping.

Supplier: Foamtec International

Wipers are made from a fully cross-linked, naturally hydrophillic polyurethane foam and laundered with a proprietary process in an ISO Class 4 (FED-STD-209E Class 10/M2.5) environment.

Supplier: Texwipe

Ideal for cleaning computer and electronic equipment.