You searched for: Manifolds

Supplier: Chemglass

Double bank, three-port manifold with 0 to 8 mm Chem-Vac™, Chem-Cap® valves for use on the (80060-052) portable cart.

Supplier: Kemtech America

Manifold features 4 mm double hollow high vacuum stopcocks

Supplier: Phenomenex

SPE vacuum manifolds are ideal for SPE sample preparation, filtration and elution.

Supplier: Kemtech America

General purpose double bank manifolds are designed for use with vacuum and inert gas

Supplier: 3M Healthcare

3M™ High Flow Series Manifold Expansion Filter Head, Model SH-EXP is an add-on expansion head capable of increasing the system capacity by allowing the addition of High Flow Series water filtration cartridges.

Supplier: DYNAMIC MACHINING

Expand your flow and line capacity.

Supplier: Chemglass

Manifold is a low cost solution for the concentration of product in 96, 48 or 24 well blocks. Delivers equal amounts of gas to each well to gently speed solvent evaporation. Needles are constructed of stainless steel. 96 well unit has the needed pressed into the block, while the 11, 15, 24 and 48 well units have removable/replaceable needles.

Supplier: Kemtech America

Double manifold is designed to incorporate a 0 - 8 mm high vacuum valve as the vacuum shut-off.

Supplier: DWK Life Sciences (KIMBLE)

The SPE glassware and manifolds have been specially designed for use with solid phase extraction disks to give you the highest possible recoveries of extracted analytes from drinking water, surface water and waste water samples.

Supplier: DYNAMIC MACHINING

Come in a variety of configurations—choose the number of ports and connections to suit your needs!

Supplier: Airgas

These two-station manifolds are designed to provide a safe, reliable method of wall-mounting a single cylinder regulator, eliminating the need to handle the regulator during cylinder change out.

Supplier: Chemglass

Main vacuum line with four 24/40 inner ports (A) having a unique configuration of 0 to 4 mm Chem-Vac™, Chem-Cap® valves.

Supplier: DYNAMIC MACHINING

Chemically-inert PTFE handles some of your most aggressive chemical solutions.

Supplier: DYNAMIC MACHINING

Come in a variety of configurations—choose the number of ports and connections to suit your needs!

Supplier: Promega Corporation

The Vac-Man 96 Vacuum Manifold is designed for manual use with the Promega SV 96 and SV 9600 Systems for isolating up to 96 samples simultaneously.

Supplier: 3M Healthcare

3M™ Encapsulated Production Systems can be pivoted to the horizontal position for ergonomic loading and unloading at waist height and to the vertical position for filtration. This means operators do not have to lift capsules above their heads and risk exposure to fluid spills when handling used capsules and drastically reduce the time it takes to change out filter cartridges.

Supplier: Promega Corporation

A vacuum manifold capable of processing 20 samples simultaneously. Supplied with 20 individual Luer-Lok Stopcocks, so each port is controlled individually.

Supplier: Promega Corporation

The ideal system for rapid, effective nucleic acid purification. Each manifold comes with 2 individually controlled One-Way Luer-Lok Stopcocks; up to 2 samples can be processed at a time.

Supplier: Chemglass

Designed to purify and transfer solvents under inert conditions.

Supplier: Restek

The oil-free vacuum/pressure station allows switching from pressure to vacuum in a matter of seconds.

Supplier: Chemglass

Vaccum lines constructed using 0.4 mm Chem-Vac™ Chem-Cap® valves, has 4 ports with greased glass stopcocks.

Supplier: Advantec MFS

Manifolds are used under closed conditions and must be vented to atmosphere without breaking the vacuum connection. 3-way valve vent is female Luer slip, accepts standard disposable syringe filter or stainless steel syringe filter holder.