You searched for: Manifolds

Supplier: DWK Life Sciences (KIMBLE)

These autoclavable stainless steel microtest manifolds are ideal for use with 24 or 96 well microplates

Supplier: Phenomenex

Streamline 96-well plate processing for easier sample preparation with a pneumatic positive pressure manifold.

Supplier: Kemtech America

Vacuum manifold with front-left-right and rear-left 10 mm hose connections.

Supplier: Kemtech America

General purpose manifolds are available with either 2 mm or 4 mm PTFE stopcocks

Supplier: 3M Healthcare

3M™ ScaleGard™ HP Pre-Filter Manifold Expansion Head, Model SGHP Pre-Exp increases the capacity of pre-filtration by allowing the addition of pre-filter cartridge.

Supplier: Ace Glass

Designed by Dr. Raymond Firestone, this rapid and efficient purge valve is designed to allow 100% replacement of air in reaction vessels with any desired gas. No mercury is used, no reducing valve is needed on the gas source, and no high-vacuum source is required. The valve also eliminates the need to watch manometers, hand-control gas flow, or install warning systems. Expensive gases are conserved as the flow can be cut to nearly zero when purging is complete. This economic valve makes it possible to run all reactions under nitrogen.

Supplier: Kemtech America

General purpose double bank manifolds are designed for use with vacuum and inert gas

Supplier: Promega Corporation

A vacuum manifold capable of processing 20 samples simultaneously. Supplied with 20 individual Luer-Lok Stopcocks, so each port is controlled individually.

Supplier: DYNAMIC MACHINING

Come in a variety of configurations—choose the number of ports and connections to suit your needs!

Supplier: Kemtech America

Double manifolds are equipped with high vacuum hollow glass stopcocks

Supplier: Ace Glass

This shaded pole blower is designed to pull air through an air sampling manifold.

Supplier: Promega Corporation

The Vac-Man 96 Vacuum Manifold is designed for manual use with the Promega SV 96 and SV 9600 Systems for isolating up to 96 samples simultaneously.

Supplier: DYNAMIC MACHINING

Expand your flow and line capacity.

Supplier: DYNAMIC MACHINING

Come in a variety of configurations—choose the number of ports and connections to suit your needs!

Supplier: Kemtech America

Double manifold is designed to incorporate a 0 - 8 mm high vacuum valve as the vacuum shut-off.

Supplier: Kemtech America

Manifolds feature a 14/20 outer joint at the center designed to fit a rubber septum

Supplier: Restek

Field duplicates of canister samples frequently result in analyte concentrations with high relative standard deviations.

Supplier: DYNAMIC MACHINING

Chemically-inert PTFE handles some of your most aggressive chemical solutions.

Supplier: Kemtech America

All glass manifolds are equipped with 4 mm double oblique, high vacuum hollow glass stopcocks, which are precision ground with corresponding numbers on barrel and plug.

Supplier: 3M Healthcare

3M™ High Flow Series Dual Port Single Manifold Assembly (DP1XX) provides a dual outlet design for 3M™ High Flow Series water filtration cartridges.

Supplier: Promega Corporation

The ideal system for rapid, effective nucleic acid purification. Each manifold comes with 2 individually controlled One-Way Luer-Lok Stopcocks; up to 2 samples can be processed at a time.

Supplier: Ace Glass

With a spherical joint 35/20 ball joint at one end, a standard taper 24/40 outer standard taper joints at opposite end

Supplier: DYNAMIC MACHINING

Come in a variety of configurations—choose the number of ports and connections to suit your needs!

Supplier: Chemglass

Designed to purify and transfer solvents under inert conditions.

Supplier: DYNAMIC MACHINING

Come in a variety of configurations—choose the number of ports and connections to suit your needs!

Supplier: Kemtech America

Manifolds are equipped with 4 mm double oblique, high vacuum solid glass stopcocks which are precision ground with corresponding numbers on barrel and plug.

Supplier: Kemtech America

Manifolds feature 35/20 ball joints and 4 mm double oblique high vacuum hollow glass stopcocks.

Supplier: 3M Healthcare

3M™ High Flow Series Scale Feeder Single Manifold Assembly (SF1XX) is designed for use with Model HF8–S replacement cartridge.

Supplier: Kemtech America

Supplied with a high vacuum valve with a PTFE O-ring at the tip and PTFE wiper to protect Viton® O-ring on the shaft.

Supplier: Kemtech America

Forward facing 0 to 8 mm high vacuum valves allow for easy operation within a fume hood.