Multi-Element Standards
Avantor offers a wide range of certified cationic standards designed for instrument calibration in ion-exchange chromatography (IC) applications, which can be applied toward environmental or food analysis and quality control. IC is an analytical technique used for the separation and quantification of anions and cations in aqueous samples. Avantor offers high-purity, well-defined reference materials ideal for low-ppm level quantification or trace analysis. Bottles of cationic standards are available for a range of elements.
100 ppm 6 Element Precious Metal USP<232>/ICH Q3D Standard
Supplier: Inorganic Ventures
100 ppm 6 Element Precious Metal USP<232>/ICH Q3D Standard
Expand 1 Items
EPA CLP ICP-OES Soil/Water Spike Standard
Supplier: Inorganic Ventures
EPA CLP ICP-OES Soil/Water Spike Standard
Expand 1 Items
200.7WW LFS Solution #2
Supplier: Inorganic Ventures
200.7WW LFS Solution #2
Expand 1 Items
EPA Method 200.7 Interference Check Standard 3
Supplier: Inorganic Ventures
EPA Method 200.7 Interference Check Standard 3
Expand 1 Items
GFAA Calibration/Quality Control Standard
Supplier: Inorganic Ventures
GFAA Calibration/Quality Control Standard
Expand 1 Items
EPA CLP ICP Soil/Water Spike Standard
Supplier: Inorganic Ventures
EPA CLP ICP Soil/Water Spike Standard
Expand 1 Items
100 ppm 7 Element ICP Calibration/Quality Control Standard
Supplier: Inorganic Ventures
100 ppm 7 Element ICP Calibration/Quality Control Standard
Expand 1 Items
100 ppm 8 Element ICP-MS Internal Standard
Supplier: Inorganic Ventures
100 ppm 8 Element ICP-MS Internal Standard
Expand 1 Items
Elemental Impurities F, SPEX CertiPrep
Supplier: SPEX CERTIPREP LLC
ICH Standard
Expand 1 Items
ICP Alternate Interferents A, SPEX CertiPrep
Supplier: SPEX CERTIPREP LLC
CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.
The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.
US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:
• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements
Alternate Standards
We also provide a solution of alternate interferents and alternate analysis. Alternate interferents A (INT-A2) and alternate analytes B (INT-B2) may be prepared in combination with the INT-A1 and INT-B3 solutions mentioned, or any combination involving the four solutions, depending on the analytes and interferents of interest to you. We provides ICP-MS interferents and interferent check solutions for SW-845.
Expand 1 Items
USP 232 Revision 40, Inhalation 2B, Mix 2 Elemental Impurities, SPEX CertiPrep
Supplier: SPEX CERTIPREP LLC
USP Standard.
Expand 1 Items
Claritas PPT® Grade ICP-MS Multi-Element Solution 2A without Mercury, SPEX CertiPrep
Supplier: SPEX CERTIPREP LLC
Claritas PPT® multi-element standards for ICP-MS.
Expand 1 Items
ICP Spike Sample 4, SPEX CertiPrep
Supplier: SPEX CERTIPREP LLC
CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.
The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.
US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:
• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements
CLP ISM 01.2 and ILM 05.2 & 05.3 Standards for ICP
Our spike standard, SPIKE-4, provides all of the analytes required for the IC, ICP-AES and the AA spike.
Expand 1 Items
EPA CLP ICP Interference Check Standard B4
Supplier: Inorganic Ventures
EPA CLP ICP Interference Check Standard B4
Expand 1 Items
10 ppm Precious Metals ICP Standards
Supplier: Inorganic Ventures
10 ppm Precious Metals ICP Standards
Expand 2 Items
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.
Catalog #: 21905-026
Supplier: Kimberly-Clark
Catalog #: 32934-080
Supplier: Kimberly-Clark
Catalog #: 89039-656
Supplier: VWR International