You searched for: Atomizers

Supplier: Corning

Made from Type I Class A - low-expansion borosilicate glass, per ASTM E438 (standard specification for glasses in laboratory apparatus).

Supplier: SP Industries

When using thin layer or paper chromatography (TLC), these borosilicate glass atomizers are used for spraying chromogenic reagents.

Supplier: Electron Microscopy Sciences

Sure Shot® pressure sprayers are available in 16, 8 and 7 oz. capacities.

Supplier: Chemglass

These TLC sprayers provide a fine, uniform spray ideally adjusted for the development of chromatographic patterns

Supplier: General Glass Blowing

These indicator sprayers use low pressure air (5 lbs.) to provide a fine, uniform spray that is ideally adjusted for development of chromatography patterns

Supplier: Ace Glass

This sprayer delivers a true aerosol with no droplets, and enables thorough brushing for uniform development

Supplier: MilliporeSigma

UV Lamp, 254 nm for Thin-Layer Chromatography

Supplier: PerkinElmer

This High Sensitivity Nebulizer Assembly, with Platinum/Iridium needle and Kalrez O-rings, is for use with AAnalyst® 100/300/200/400/700/800 and earlier AA series instruments. It provides maximum sensitivity, precision and freedom from analytical interferences.

Supplier: PerkinElmer

This PolyPro-ST nebulizer with detachable capillary is used with ELAN® and NexION® ICP-MS series instruments.

Supplier: PerkinElmer

This high sensitivity nebulizer assembly, with Tantalum needle and Kalrez O-rings, is for use with AAnalyst® 100/300/200/400/700/800 and earlier AA series instruments. This complete assembly with Tantalum capillary assembly is for use with solutions containing aqua regia. It provides maximum sensitivity, precision and freedom from analytical interferences.

Supplier: PerkinElmer

This GemCone nebulizer is designed for use with the Optima® 3000 XL or the Optima® 3000 DV in the axial configuration. Low-flow GemCone Nebulizers permit lower nebulizer gas flow rates, useful for spectral lines with high excitation energies and for providing a more robust plasma.

Supplier: PerkinElmer

This PFA-ST high efficiency microFlow nebulizer is for use with all ELAN® and NexION® ICP-MS series instruments. The PFA-ST nebulizer features high purity, HF-resistance and high performance, along with an exchangeable external sample uptake capillary. The sample uptake rate is controlled by the dimension of the external capillary or probe. It is chemically resistant and ideal for strong acids, alkalis, and organics.

Supplier: PerkinElmer

Complete chemically inert Cross-Flow II nebulizer assembly for ICP-MS. Specially processed to reduce BEC levels below 1 ppb.

Supplier: PerkinElmer

The EzyFit Connector is designed for use with MicroMist and SeaSpray nebulizers in Optima® 4x00/5x00/7x00/8x00 and Avio® 200/500 ICP-OES series instruments in addition to ELAN® 5000/6x00/9000/DRCs and NexION® 300/350/1000/2000 ICP-MS series instruments.

Supplier: PerkinElmer

This O-ring-free 50 ml glass Twister spray chamber, with integrated Helix™ and auxiliary gas port, is designed for organics applications for use with Optima® 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments. It is recommended for use with Oil Analysis applications. It features a 4 mm baffle and Oxygen port.

Supplier: PerkinElmer

This high sensitivity GemTip capillary assembly is for use with AAnalyst® 100/300/200/400/700/800 and earlier AA series instruments. Only includes capillary needle assembly, not complete assembly.

Supplier: PerkinElmer

Low-flow GemCone nebulizers permit lower nebulizer gas flow rates, useful for spectral lines with high excitation energies providing a more robust plasma.

Supplier: PerkinElmer

This Conikal™ nebulizer, with 0.7 L/min argon flow rate and 2.0 ml/min uptake rate, is for use with Optima® 4x00/5x00/7x00 DV series, Optima® 8x00 and Avio® 200/500 ICP-OES series instruments. It is ideal for samples containing only moderate concentrations of dissolved salts, no particulates and no hydrofluoric acid.

Supplier: PerkinElmer

The MEINHARD® concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. For use with organics.

Supplier: PerkinElmer

This high sensitivity plastic body nebulizer is for use with AAnalyst® 100/200/300/400/700/800 and earlier AA series instruments. It is corrosion resistant and can be used to aspirate almost all solutions, even those solutions containing a high percentage of acid.

Supplier: PerkinElmer

The GemCone™ conespray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer.

Supplier: Ace Glass

This convenient, powerful spray unit is used for spraying indicators.

Supplier: PerkinElmer

This glass MicroMist™ nebulizer includes connectors and sample tubing for use with ELAN® 5000/6x00/9000/DRCs and NexION® 300 and 350 ICP-MS series instruments. It can also be used with Optima® 3x00 RL ICP-OES series instruments.

Supplier: PerkinElmer

This glass MicroMist™ nebulizer includes connectors and sample tubing for use with ELAN® 5000/6x00/9000/DRCs and NexION® 300 and 350 ICP-MS series instruments. It can also be used with Optima® 3x00 RL ICP-OES series instruments.

Supplier: PerkinElmer

This standard 50 ml borosilicate glass Twister™ spray chamber, with integrated Helix™, is used with Optima™ 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

Supplier: PerkinElmer

This concentric SeaSpray™ Quartz Nebulizer is designed for use with PerkinElmer ELAN® 5000/6x00/9000/DRCs and NexION® 300/350/1000/2000 ICP-MS series of ICP-MS instruments. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts and conferring significant sensitivity gains.

Supplier: PerkinElmer

This universal corrosion-resistant GemTip plastic body nebulizer is for use with AAnalyst® 100/200/300/400/700/800 and earlier AA series instruments. It is corrosion resistant and can be used to aspirate almost all solutions, even those solutions containing a high percentage of acid.

Supplier: PerkinElmer

This glass MicroMist™ nebulizer includes connectors and sample tubing for use with ELAN® 5000/6x00/9000/DRCs and NexION® 300 and 350 ICP-MS series instruments. It can also be used with Optima™ 3x00 RL ICP-OES series instruments.

Supplier: PerkinElmer

The SeaSpray™ concentric glass nebulizer has a 2 ml/min uptake rate, a 0.7 L/min air flow rate.

Supplier: PerkinElmer

This glass cyclonic spray chamber and adaptor assembly is used with PerkinElmer Optima™ 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV and 8x00 ICP-OES series instruments.