You searched for: Specimen Mounting Supplies

Supplier: Electron Microscopy Sciences

Our large size gelatin capsules are ideal for storing either delicate or small items. It is also suitable for use as an embedding mold for paraffin or paraplast. The capsules come complete with a locking ring. A variety of sizes are available.

Supplier: Electron Microscopy Sciences

Non-Slotted head pin stub mounts are for use with Cambridge, Leo, Philips 500, Cameca SEMs. Made from lathe finished ultra-pure aluminium.

Supplier: Electron Microscopy Sciences

This 42mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with stainless steel set screws.

Supplier: Electron Microscopy Sciences

It accommodates four pin type, up to 12.5 (¹/₂") surface specimen stubs, with 3.1 mm (¹/₈") diameter pin.

Supplier: ELECTRON MICROSCOPY SCIENCE

mPrep/s™ capsules allow users to fix, dehydrate and embed specimens in a single vessel. This capsule is highly recommended for transmission and scanning electron microscopy, but can also be used for any sample preparation.

Supplier: Sakura Finetek

Use for chilling and preparing paraffin blocks for microtome sectioning also as cold tray for other lab procedures.

Supplier: Electron Microscopy Sciences

Clamp thin specimens and cross sections without conductive paint or tape for viewing in a scanning electron microscope using the double slot vise specimen holder.

Supplier: CONDUCTIVE CONTAINERS INC. TE

Foam Pad, Conductive Container

Supplier: Electron Microscopy Sciences

A collection of supplies for TEM sample preparation.

Supplier: Electron Microscopy Sciences

Aluminum small, slotted head. Surface measures: 9.6 x 11.2 mm (³/₈ x ⁷/₁₆"). Pin 3.1 mm (¹/₈").

Supplier: Electron Microscopy Sciences

For TEM and Metallography - Model MC2
The MicroPol™ Polisher is a compact, versatile, electrically controlled, precise mechanical specimen grinder/polisher designed for planar grinding, thinning and polishing of specimen in the fields of nanotechnology, semiconductors, and materials science. The parameters of polishing (speed, load, time, etc.) can be matched according to the properties of the specimen. High quality samples can be prepared with minimal effort by the operator.

Supplier: Electron Microscopy Sciences

EMS Mica Sheets offer a clean surface for EM applications, carbon filming and particle spraying, as well as for AFM applications. The highest quality mica (V-1 or V-2) for AFM applications to the Medium Quality (V-4 to V-6) for replication and thin film deposition.

Supplier: Electron Microscopy Sciences

A two-directional mold that allows for single embedded specimens to be sectioned both laterally and transversely . Tissues to be embedded are accurately trimmed and placed so that both sides of the tissue are against both edges of the cavity tip. Chien, K., et al. (1985) Proc. Ann. EMSA Meeting 43, 460.

Supplier: Electron Microscopy Sciences

This 24 place SEM holder perfect with Hitachi VP SEM.

Supplier: Electron Microscopy Sciences

The ideal product for testing image area, distortion, field flatness and other parameters in optical and imaging systems.

Supplier: Electron Microscopy Sciences

The Tissue Matrix is designed to aid the basic research scientist in the free-hand dissection of a wide variety of different tissues and repeatedly slice fresh tissue at intervals as small as 1 mm.

Supplier: Electron Microscopy Sciences

1) Surface measures 12.7 mm (¹/₂") in diameter and has 3.1 mm (¹/₈") pin
2) Surface measures 10 mm (³/₈") in diameter and height
3) Head measures 15 mm (⁵/₈") in diameter, Height: 10 mm (³/₈")
4) Head measures 25 mm (1") in diameter, Height: 20 mm (¹³/₁₆")

Supplier: Electron Microscopy Sciences

The Ion Mill Stage is designed to accept the special SEM stub used with the Tripod Polisher®. The SEM stub is mounted to the Ion Mill Stage and the samples are briefly ion milled in order to remove fine scratches, polishing debris and to give the surface topography prior to SEM analysis.

Supplier: Electron Microscopy Sciences

This 45 degree pin stub holder allows for a higher SE signal without having to tilt the specimen stage and it accommodates any standard 12.7 mm (¹/₂") pin stubs with 3.2 mm (¹/₈") pin. Grooved, machined aluminum with stainless steel Allen set screw.

Supplier: Electron Microscopy Sciences

These stainless steel chucks are designed to be used cold for rapid freezing, and to maximize the gripping power required to hold the embedded tissue block. The stem of the chuck provides the focal point for a sharp tap resulting in an easily release of the block from the well. These chucks fit many of the major brand cryostat and can be used in most cryostats with use of an adapter. These Chuck Adapters have stem measures 20mm L x 9mm diameter, and fit Leica and most Microm cryostats. We also offer adapters to use these chuck for other cryostats.

Supplier: WORLD PRECISION INSTRUMENTS LLC

WPI brain matrix used to get thin and uniform brain slices, which is crucial for histological analysis, immunohistochemistry, molecular biology, and more. This consistency is essential for accurate comparisons between different brains and experimental conditions. These WPI rodent brain matrices are made of stainless steel, a durable material. They have precision-cut channels or slots that hold the brain in place during slicing. Choose brain matrix based on your species (mouse or rat) and the size of the animal.