You searched for: Film Processing Supplies

Supplier: Electron Microscopy Sciences

A stainless Steel Paper and Film Clip

Supplier: Electron Microscopy Sciences

A high contrast developer for electron microscopy films.

Supplier: Electron Microscopy Sciences

The Clean Sweep Squeegee that out performs all other squeegees

Supplier: Electron Microscopy Sciences

Supplier: Electron Microscopy Sciences

Photo-Flo Solution decreases water surface tension and minimizes water marks and drying streaks on film. It speed dries.

Supplier: Electron Microscopy Sciences

Ilford Rapid Fixer is a non-hardening rapid fixer supplied as a liquid concentrate for fixing black and white film and paper in all manual and machine processing applications. It is easy and convenient to use in the temperature range of 18 – 40°C (64 -104°F). Ilford Rapid Fixer must not be used with fix hardeners.

Supplier: Electron Microscopy Sciences

Designed for use in the Paterson Super System 4 tank, the Auto Load Reel allows thru free flow of solutions. Paterson Reels have a smooth finish and use the unique twin ball ratchet system. Film loading just couldn’t be easier.

Supplier: Electron Microscopy Sciences

An all glass apparatus that casts uniformly thin films of parlodion, formvar, or butvar directly onto 1 x 3 microscope slides.

Supplier: Electron Microscopy Sciences

Sheets are completely transparent. Fits all U.S. standard 3-ring binders: 8 1/4 x 1 1/4". Convenient. Offers good protection for your valuable negatives and prints.

Supplier: Electron Microscopy Sciences

HYPAM is a non-hardening liquid rapid fixer that can be used with the fix hardening agents that are needed for some film processing applications. Without the addition of a hardener it is suitable for all black and white film and paper, manual and machine processing applications in the temperature range of 18 – 40°C (64 -104°F). HYPAM is the recommended fixer for all ILFORD scientific products and other X-ray films, plates and cineradiography films. If the addition of hardener is required, use ILFORD Hypam Hardener.

Supplier: Electron Microscopy Sciences

Each pack makes one gallon. This general purpose fixer is for film and paper.

Supplier: Electron Microscopy Sciences

Archival quality, white writing edge, crystal clear. Allows for the study of your print without removing it from the sleeve. Packed in 100 per pack.

Supplier: Electron Microscopy Sciences

This quick and efficient film washing system fits most domestic taps. It is designed for the Paterson Super System 4 tanks.

Supplier: Electron Microscopy Sciences

Kodak hard rubber tanks and floating lids, comes in 3 different sizes

Supplier: Electron Microscopy Sciences

Glassine envelopes, acid free for negative storage. Open end, thumb-cut, side-seamed.

Supplier: Electron Microscopy Sciences

Each pack makes one gallon (3.8L). For photographic paper and projector slide plates.

Supplier: Electron Microscopy Sciences

A rapid-acting hardening fixer for automated and tray processing

Supplier: Electron Microscopy Sciences

Universal glass-type masking negative carriers features four individually adjustable masking blades and removable glass inserts

Supplier: Electron Microscopy Sciences

PRO-LINE Archival Sleeving is a specially formulated 3-mil archival polypropylene which has a physical density that is less than other sleeving materials, making it more pliable and gentle to the film

Supplier: Electron Microscopy Sciences

This acetate film soften in acetone and can be used for duplicating purposes

Supplier: Electron Microscopy Sciences

Light proof protection for film and paper. No more fussing with frayed cardboard boxes. Exclusive "Tilt and Tap" feature for easy single sheet removal. Holds 200 Single Weight sheets. Measures 8 1/2 x11" for 8 x 10" paper.

Supplier: Electron Microscopy Sciences

For use with T-Max Film, Tri-X Pan. A liquid concentrate for easy mixing. Each pack makes 1 gallon.

Supplier: Electron Microscopy Sciences

These rollers are lightweight and sturdy, offering fine smooth action, yet they have ample strength to efficiently remove surplus water from prints and distribute an even pressure.

Supplier: Electron Microscopy Sciences

This device when fitted to the 8X magnifier (68125) enables you to view and check the 35mm roll film while marking the desired frame by depressing the puncher (located on the side of the device). The puncher punches out a V-shaped piece of film on the perforation to mark the frame. When fitted in the reverse position to the 8X magnifier, you are able to view and check the slides.

Supplier: Electron Microscopy Sciences

Paterson® Standard and Major Print Washers.

Supplier: Electron Microscopy Sciences

The Super System 4 is simpler to load, faster to fill, and easier to clean than any other tank. It has a large diameter one-piece lid and funnel, which clips into place positively and securely enabling the tank to be filled and emptied quickly. The Paterson 35 mm tank takes a single 35 mm film. The Paterson Universal tank takes two 35 mm films or a single 120/220 film. Supplied complete with one 35mm/120/220 Auto Load Reel, Watertight EVA cap prevents leakage during inversion agitation. Uses less than 300 mL solution for a single 35 mm film.

Supplier: Electron Microscopy Sciences

MULTIGRADE is a liquid developer which is concentrated and it is suitable for all black and white papers. It can be used at a standard dilution of 1+9 or at 1+14 for greater development control and economy. MULTIGRADE developer is clean working and has excellent keeping properties and gives a neutral image tone with most papers. MULTIGRADE is designed for use at ambient room temperatures, normally 20°C/68°F. We do not recommend its use for high temperature or machine processing applications. It is not suitable for film developing.

Supplier: Electron Microscopy Sciences

Polyguard Polypropylene film sleeves are the finest archival quality material, and are guaranteed to give you ultimate protection for your most important film negatives. Polyguard is 100% acid free, as well as being free from optical distortion. It is resistant to water, grease, oil, alkalies, and organic solvents. Polyguard is durable, yet pliable and gentle to the film and will not become brittle, crack, or abrade the film. All sizes are available in a clear open flap, clear front with frosted backing, and sealed flap.

Supplier: Electron Microscopy Sciences

This is a direct replacement for Kodak Polycontrast IV RC B&W Papers.Premium Quality, Cool Tone – Variable contrast. MULTIGRADE RC COOLTONE Paper has the standard weight of (190g/m 2) with a resin coated base. It is equally suitable for printing all black and white negatives including chromogenic negatives, such as ILFORD XP2 SUPER.

Supplier: Electron Microscopy Sciences

This is a direct replacement for the Kodak Polycontrast IV RC B&W Papers. Neutral tone – Variable contrast. MULTIGRADE IV RC Deluxe has the standard weight of (190g/m²)with a resin coated base.