You searched for: Environmental Test Kits

Supplier: Macherey-Nagel

Quantofix Nitrite/pH test strip for the semi-quantitative determination of Nitrite and pH in cooling lubricants

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of non ionic surfactants in water.

Supplier: CHEMetrics

The Vacu-vials® instrumental test kits employ the DPD chemistry and are accepted by the USEPA for wastewater and drinking water analysis.

Supplier: HANNA INSTRUMENTS

This chemical test kit that measures salinity by mercuric nitrate titration. This is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.

Supplier: HANNA INSTRUMENTS

This is a complete set of all the solutions required for routine pH measurement.

Supplier: Ricca Chemical

Reagent fo the APHA Nesslerization Method (direct and following distillation) for nitrogen (ammonia).

Supplier: CHEMetrics

The R-9423 refill contains 20 double-point ampoules, 21 test tubes, dropper bottle with cap, tip-breaking tool, and instructions.

Supplier: LaMotte

Aquaponics is growing rapidly as a hobby and as an industry as the farm-to-table trend continues to spread.

Supplier: CHEMetrics

Nitrate is reduced to nitrite using cadmium as the reducing agent. The resulting nitrite concentration is then determined colorimetrically. This method is applicable to drinking and surface waters, as well as domestic and industrial wastes.

Supplier: LaMotte

This advanced reagent system and unique extraction procedure based on the Mehlich I extraction provides fast, simple, and accurate soil testing

Supplier: HANNA INSTRUMENTS

Reagents for low, medium and high range colorimetric determination of total hardness.

Supplier: CHEMetrics

Film-forming amines, also known as FFAP or FFP, are chemicals applied in high-pressure boilers, cooling systems, and HRSGs to guard against corrosion and reduce the presence of corrosive agents. The K-1013 test kit utilizes the Rose Bengal method to detect and measure these substances in boiler water or steam condensate.

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: CHEMetrics

The Titrets® test uses a ceric sulfate titrant with ferroin indicator. Depending on the procedure used, this kit can determine H2O2 concentrations from 0.01% to as high as 20%.

Supplier: CHEMetrics

This test uses the DPD testing method and will turn pink in color. It is most often used to measure for accurate dosing of Bromine in water as a disinfectant, but can be used in any applications where low concentrations of bromine in water need to be measured.

Supplier: HANNA INSTRUMENTS

This chemical test kit for the determination of six parameters commonly monitored for aquaculture testing: alkalinity, carbon dioxide, hardness, dissolved oxygen, pH, and salinity. This kit is equipped with all the necessary reagents and equipment to perform over 100 tests for each parameter. pH is obtained with Hanna's pH tester, which guarantees greater accuracy and a longer life than traditional litmus paper.

Supplier: HANNA INSTRUMENTS

High quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements.

Supplier: CHEMetrics

This product is a refill for K-4815 Glycol CHEMets visual kit for the analysis of glycol in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-4815 Glycol CHEMets refill is compatible with C-4815 glycol comparator.

Supplier: CHEMetrics

CHEMetrics test kits measure total acid soluble sulfides and employ the methylene blue methodology. Sulfides react with dimethyl-p-phenylenediamine in the presence of ferric chloride to produce methylene blue.

Supplier: CHEMetrics

Filming amines are fed continuously into boiler feedwater to protect metal surfaces from corrosion caused by dissolved oxygen and carbon dioxide in condensate water. The amine forms a thin film on the surfaces that repels the potentially corrosive water.

Supplier: CHEMetrics

This product is a refill for K-3810 Cyanide (free) CHEMets visual kit for the analysis of cyanide in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-3810 Cyanide CHEMets refill is compatible with C-3801 low range cyanide comparator and C-3810 high range copper comparator.

Supplier: LaMotte

Refill for The Comprehensive Water Monitoring Kit 470004-240 and LaMotte® TesTab® Water Investigation Kit 470007-270

Supplier: CHEMetrics

This product is a refill for K-9011 Silica ULR CHEMets visual kit for the analysis of silica in water. It contains 30 self-filling ULR CHEMets ampoules packaged securely in cardboard trays and box. R-9011 Silica ULR CHEMets refill is compatible with C-9011 Silica ULR comparator.

Supplier: CHEMetrics

This product is a refill for K-7404 Ozone CHEMets visual kit for the analysis of ozone in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-7404 Ozone CHEMets refill is compatible with C-7404 low range ozone comparator and C-7405 high range ozone comparator.

Supplier: CHEMetrics

Features of titrets technology: Dependable, sealed single-use titrants Fast, easy procedure, no need to count drops No burettes or other equipment necessary Perform a titration ANYWHERE

Supplier: CHEMetrics

This product is a refill for K-6701 molybdate CHEMets visual kit and K-6702 molybdate CHEMets visual kit for the analysis of molybdate in water.It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-6702 molybdate CHEMets refill is compatible with C-6701 molybdate Comparator and C-6702 molybdate Comparator.

Supplier: HANNA INSTRUMENTS

The replacement reagents for the iron tester sold seperatly. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.

Supplier: CHEMetrics

Test method: The Peracetic Acid CHEMets® test kit (0 to 1 and 0 to 5 ppm) employs the DPD chemistry. The sample is treated with an excess of potassium iodide. Peracetic acid oxidizes the iodide to iodine. The iodine then oxidizes DPD (N,N-diethyl-p-phenylenediamine) to form a pink colored species in direct proportion to the peracetic acid concentration. Various oxidizing agents such as halogens, ferric ions and cupric ions will produce high test results. Hydrogen peroxide does not interfere with this test if present at levels comparable to the peracetic acid levels.

Supplier: CHEMetrics

For preparation of 0.5 ppm standard. CHEMetrics® hydrogen peroxide standard (A-5505) offers the analyst an easy method to confirm the accuracy and reliability of hydrogen peroxide measurements. Conveniently packaged in a cardboard box, each pack contains 10 ampoules, a tip breaking tool and a lot-specific Certificate of Analysis. To prepare the 0.5 ppm standard, simply dispense liquid from the double-tipped ampoule and dilute to 100 ml.The 0.5 ppm standard will remain stable for 24 hours in a closed flask that is stored in the dark at room temperature.

Supplier: Macherey-Nagel

Test kit, QUANTOFIX®