Supplier: Ace Glass

This combination, all-in-one, stirring shaft bearing and debris trap is designed to prevent particles generated by bearing wear from entering the reaction vessel

Supplier: DWK Life Sciences (KIMBLE)

These U-shaped spargers are designed for use on the Teledyne Tekmar® 2000 and 3000 purge and trap concentrators when doing EPA method 603 and using either an AQUATek 50 or ALS 2050 vial autosampler.

Supplier: Bel-Art Products, a Part of SP

Heavy duty bars for use in stirring large volumes of fluid in vessels on large magnetic stirring machines such as the Cool Stir Large Volume Stirrer, 89009-206 or other large machines

Supplier: Thermo Fisher Scientific

Generate higher torque than conventional stirring bars with Komet Stir Bars.

Supplier: Caframo

Portable support stand for Caframo’s BDC250 Petite Stirrer (97001-138). The base is coated for protection from corrosion and chemical spills. Rod diameter is 10 mm (³/₈").

Supplier: Caframo

An accessory that adds a protective and safe guard to your spinning chuck by quickly snapping into place.

Supplier: Caframo

Wide base and H configuration provide excellent stability for bench top stirrers, including high torque line - Models BDC1850 (58960-447), BDC3030 (77776-348), BDC6015 (77776-354), BDC2010 (97001-136) and BDC2002 (77776-540).

Supplier: DWK Life Sciences (KIMBLE)

With rounded annealed ends

Supplier: Thermo Fisher Scientific

Versatile stirring rod with a flat, flexible, 15.9x15.9mm (⁵/₈x⁵/₈") paddle at one end, and a triangular paddle at other end

Supplier: DWK Life Sciences (KIMBLE)

Made of KG-33 borosilicate glass; which has a low coefficient of expansion

Supplier: SAMPLING SYSTEMS LTD

These paddles are ideal for use when producing liquids and suspensions. Stirrers are made from 316 stainless steel.

Supplier: IKA Works

Can be used with the RW16 Basic, EUROSTAR power series, or EUROSTAR power control-visc P7

Supplier: Bel-Art Products, a Part of SP

These stirbar assortments come in a convenient storage box and provide instant availability of these highly popular Teflon® PTFE encapsulated Alnico magnets.

Supplier: Ace Glass

Borosilicate glass-coated magnetic stirring bars are great for use in high temperatures, (up to 275°C) or for applications where zero absorption of the stirred solution is needed.

Supplier: Bel-Art Products, a Part of SP

Spinstar® magnetic stirring bars create a deep mixing vortex at relatively slow speeds.

Supplier: Bel-Art Products, a Part of SP

This flexible PTFE magnetic retriever will remove the largest magnetic stirring bars from deep vessels.

Supplier: Bel-Art Products, a Part of SP

Flexible Teflon® rod with a powerful Alnico Teflon®-coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps.

Supplier: Caframo

Pitched blade turbine composed of electropolished 316L stainless steel. The 0.8 cm bore is compatible with all Caframo shafts. Axial flow with moderate shear for moderate viscosity mixing.

Supplier: Corning

These Corning® magnetic stir bars are PTFE-coated for increased chemical resistance.

Supplier: Bel-Art Products, a Part of SP

The Restrainer fits ergonomically in one hand, and when placed alongside the outer wall of a mixing vessel it retains and secures the stirring bar in situ.

Supplier: Bel-Art Products, a Part of SP

Keep all magnetic stirring bars and accessories organized and accessible with the Spinbar® Magnetic Stirring Bar Garage.

Supplier: Bel-Art Products, a Part of SP

A 10-pack of the most commonly used Spinbar® Octagonal Magnetic Stirring Bars in a variety of colors and sizes.

Supplier: Ace Glass

Wedge-shaped PTFE magnetic stir bars are designed to “plow” up sediment for thorough dispersion

Supplier: Bel-Art Products, a Part of SP

Circulus™ Magnetic Stirring Bars offer fast mixing action and strong turbulence as well as greater stability with less drifting at higher speeds.

Supplier: Bel-Art Products, a Part of SP

Micro (Flea) magnetic stirring bars are designed for stirring small volumes in vessels such as vials, tubes and gradient makers.

Supplier: Bellco Glass

Molded, seamless PTFE construction is ideal for procedures using all Bellco magnetic stirrers. Excellent for mixing media and buffer solutions.

Supplier: Bel-Art Products, a Part of SP

Stir bar with removable stabilizing ring to keep it centered in vessel.

Supplier: Bel-Art Products, a Part of SP

The Magnetic Stirring Bar Arrester holds your stirring bar in place when pouring from a beaker or flask by placing the arrester against the bottom of the container.

Supplier: Bel-Art Products, a Part of SP

Reduce frequency of spinout in viscous solutions or when stirring at high speeds.

Supplier: Mettler Toledo

Propeller style stirring rod for use with DL50 Graphix and DL50 Rondolino Titrators.