You searched for: Stains

Supplier: Electron Microscopy Sciences

Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam.

Supplier: Electron Microscopy Sciences

MWM100 Black Wax is designed for use as a masking material in jet polishing applications. As it is chemically inert, it is resistant to etching solutions such as hydrofluoric acid, perchloric acid and acetic acid. While it is resistant to many acids, it can be easily removed with hydrocarbon or chlorinated solvents.

Supplier: Electron Microscopy Sciences

(A rapid mounting media for microscopy.) For long life preparations, without bubble formation at high ambient temperatures. It can be used for all dehydrated microscopic preparations. Cure time is 20 minutes at room temperature. It is colorless with an acid number less than 2.50 and a R.I. ND20 approx 1.49-1.5. (Contains xylene).

Supplier: Electron Microscopy Sciences

The kit consists of two components, equal amount, very low viscosity, (~65 cps), in convenient dispenser top bottles. To prepare the embedding resin, just mix equal amounts of the two components. The resin readily infiltrates into specimen and polymerizes to a clear, hard block overnight at 60°C.

Supplier: Electron Microscopy Sciences

MWS052 is a tan colored wax, which is translucent on thin films. Softness makes it most useful with abrasive slurry cutting of materials. Best suited to non-porous surfaces such as glass or polished metal with a reasonably large area. Easily soluble in a variety of solvents.

Supplier: Mortech Manufacturing

Applied after a specimen is marked with a dye, Melody is a quick drying fixative spray that forms a protective layer on the marked surface while still allowing the tissue processing reagents to penetrate the tissue. Melody is unique to Mopec and can be used with all dye colors and on all specimen types. The chemistry of pigments, especially those seen in yellow, orange and red tissue marking dyes manufactured by alternative suppliers often suffer during tissue processing protocols.

Supplier: AAT BIOQUEST INC

The mounting medium is the solution in which the specimen is embedded, generally under a cover glass.

Supplier: Electron Microscopy Sciences

Kit consists of: 450 mL Glycol methacrylate, GMA, 225 mL n-Butyl methacrylate, 50 mL Ethylene glycol dimethacrylate, 15g Benzoyl Peroxide Paste, and 20 mL Polyethylene Glycol 400.

Supplier: Electron Microscopy Sciences

Epo-Tek® H20E is a two component, 100% solid silver-filled epoxy system.

Supplier: Electron Microscopy Sciences

The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing.  This pre-mixed, ready to use resin, saves you time and minimizes chemical contact.  MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling.  Store at room temperature.

Supplier: Electron Microscopy Sciences

Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.

Supplier: Electron Microscopy Sciences

Three different mixtures: one for relatively soft blocks, another for harder blocks for collagenous tissue, and a tougher one if required., Lockwood, W.R. Anatomical Record, 150, 129 (1964). Kit consists of 2x225 ml DER 332, 225 ml DER 732, 450 ml DDSA; Specially Distilled, 50 ml DMP-30.

Supplier: Electron Microscopy Sciences

When preparation requirements include less expensive, uniform size and shape, and short processing times, hot mounting (hot compression mounting) is ideal. Hot mounting takes place under pressure in a mounting press, where the specimen is placed in a cylinder together with the appropriate mounting resin.

Supplier: Electron Microscopy Sciences

A dry temporary adhesive film, 0.003" thick, which can be easily cut to size with either a razor or scissor. This mount permits pre-placement of the adhesive film exactly where the user wants it. It melts at 195-210°F. After application it can be dissolved rapidly in trichloroethylene or toluene. This material is particularly useful in applications where a pre-formed adhesive film is needed to assure uniform bonding and flatness or in bonding stacks of substrates such as LCD glass slides for slicing. Sheet size 8"x10".

Supplier: Electron Microscopy Sciences

Fluoro-Gel Mounting Medium with a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula preserves rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 388, Alexa Fluoro 594 tetramethyly rhodamine, and Redox. The fluorescence is retained during prolong storage at 4°C in the dark. This medium contains Phynylenediamine and is not suitable for immunofluorescence of Cy dyes, Phycoerythrin (R-PR) phycocyanin  (PC), and allophycocyanin (APC).

Supplier: Electron Microscopy Sciences

Mounting Wax 70 is a quartz type sticky, orange colored wax (translucent in thin films) used to hold crystals or other materials while they are being sliced, lapped or polished. Moderate hardness and strength make it useful for bonding small samples in diamond wheel sawing and wire sawing operations. Widely used for holding semiconductors, optical materials, ceramics and metals with medium to large contact areas. Chemical resistant. 100 Gram /Pkg of 29 sticks, .25" dia x 4" long (6mm dia x 100mm). Moderate Hardness and a Melting Point of 70°C. Dilutent: Warm soapy water

Supplier: Bulldog Bio

The best Coomassie Blue stain on the market; one step, ten minutes, zero destaining, and zero toxicity.

Supplier: Invitrogen

Imperial Protein Stain is a ready-to-use colorimetric stain formulated with coomassie dye R-250 that delivers consistent nanogram-level detection of proteins in polyacrylamide electrophoresis gels or nitrocellulose membranes.

Supplier: Invitrogen

The Pierce Silver Stain Kit is a rapid, ultra-sensitive, and versatile silver stain system for protein detection in polyacrylamide gels, yielding consistent and reliable results. It is a metallic silver (Ag) protein stain that yields a remarkably clear and uniform gel background. In standard mini gels, proteins are detectable at greater than 0.25 ng per band or spot. The protocol has been optimized for flexibility by allowing short or overnight gel fixation and staining steps without affecting staining performance (sensitivity or clarity). A short (one-minute) sensitization step, performed after gel fixation, yields results that are free of the characteristically dark or blotchy backgrounds often seen with homemade or other commercially available silver stains. This feature is beneficial when performing densitometric analysis of silver stained gels.

Supplier: IMEB INC MS

The Tek-Select® Diff-Stain kit is designed to provide Nuclear and cytoplasmic staining and recently has provided excellent staining for Helicobacter pylori as well as a Hematology stain.

Supplier: Invitrogen

Thermo Scientific Pierce Zinc Reversible Stain Kit provides rapid and highly sensitive detection of protein in polyacrylamide gels immediately after electrophoresis as well as erasability for subsequent transfer or band extraction.

Supplier: Alkali Scientific

Ensure safe and efficient nucleic acid staining with SmartGlow™ Safe Green Pre Nucleic Acid Stain, designed for enhanced visualization and safety.

Supplier: Bio-Rad

Ready-to-use, non-hazardous colloidal Coomassie G-250 stain for protein polyacrylamide gels. Use QC Colloidal Coomassie to stain proteins in SDS-PAGE gels without using methanol for fixing.

Supplier: ELITECHGROUP INC. MS

Reagents designed for staining peripheral blood smears with the aerospray hematology slide stainer.

Supplier: Bulldog Bio

RedSafe Nucleic Acid Staining Solution is a new and safe alternative to the traditional ethidium bromide(EtBr) stain for detecting DNA and RNA in agarose gels.

Supplier: Bulldog Bio

Midori Green Advance — Safe DNA Stain, a safe alternative to ethidium bromide

Supplier: Invitrogen

The Pierce Reversible Protein Stain Kit for Nitrocellulose Membranes is a rapid and sensitive alternative to Ponceau S stain for protein detection on nitrocellulose membranes after transfer from polyacrylamide gels.

Supplier: Bio-Rad

These negative stains are based on selective precipitation of metal ions in gels, leaving protein bands unstained and unmodified. Since the protein is unmodified, it is fully compatible with downstream applications such as mass spectrometry. These are easy and rapid procedures, requiring less than 15 minutes to complete. Bio-Rad offers two types of negative stains for polyacrylamide gel staining, both of which offer higher sensitivity than Coomassie Brilliant Blue R–250 stain.

Supplier: Bio-Rad

Premixed staining solution, for polyacrylamide protein gels. Choose the flexibility of Bio-Safe Coomassie Premixed Staining Solution. Proteins can be visualized in polyacrylamide gels with or without the use of acetic acid/methanol fixation.

Supplier: Invitrogen

The Thermo Scientific Pierce Reversible Protein Stain Kit for PVDF Membranes is a rapid and sensitive alternative to Ponceau S stain for protein detection on PVDF membrane after transfer from polyacrylamide gels.