You searched for: Distillation Components

Supplier: Ace Glass

Used for collection and long-term storage of solvents

Supplier: Ace Glass

This distillation column has honeycomb packing support sealed into column above the bottom joint

Supplier: DWK Life Sciences (KIMBLE)

The Hickman distillation head is designed for short path atmospheric or vacuum distillations with quantities ranging from a fraction of a milliliter to three milliliters.

Supplier: DWK Life Sciences (KIMBLE)

Bidwell-Sterling designed for the determination of moisture in foods and organics.

Supplier: DWK Life Sciences (KIMBLE)

Design uses Vigreux indentations for increased surface area within the vapor path. This promotes better refluxing prior to condensation, yielding a better separation.

Supplier: DWK Life Sciences (KIMBLE)

75° Connecting distillation adapter with BEVEL-SEAL™ used in distillation assemblies where adjustable immersion depth of the thermometer is desired.

Supplier: SP Industries

These borosilicate glass distilling heads have an interchangeable Standard Taper inner joint at the bottom for connection to a distilling column and a full length Standard Taper 10/30 outer member to receive a thermometer calibrated for 75mm immersion.

Supplier: Ace Glass

This receiver is designed for operation at other than atmospheric pressure

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Corning

Distilling apparatus to determine nitrogen levels in organic compounds.

Supplier: Ace Glass

The top side arm of this Claisen adapter has a #7 Ace-Thred for use with a nylon bushing for an adjustable length thermometer.

Supplier: SP Industries

These distilling columns come with indentations for random packing support, and water jacket that allows for alternative use as a condenser.

Supplier: DWK Life Sciences (KIMBLE)

KONTES® 75° bent distillation adapter.

Supplier: Kemtech America

Kjeldahl trap adapters feature two [ST] 24/40 joints.

Supplier: Ace Glass

This distillation head has a cold finger type condenser and 0-3mm PTFE stopcock plug with PTFE ring seals for reflux control

Supplier: Ace Glass

This apparatus comes has a [ST] 10/30 joint for a 25 mm immersion thermometer

Supplier: Ace Glass

This distillation apparatus is used for converting simple and the most complex cyanides into HCN, and for isolating cyanide from most interferences before measuring by titration or colorimetric analysis in the examination of industrial wastes and other water

Supplier: Ace Glass

This cyanide distillation apparatus is used in testing for soluble and insoluble cyanides in water

Supplier: Kemtech America

Rotating distillation receiver allows four fractions to be collected.

Supplier: Ace Glass

This column has a reinforced outer [ST] joint at top and a ground inner [ST] joint at bottom

Supplier: Ace Glass

The column length in millimeters (listed below) refers to the effective length of the column as measured from the lowest to the highest indent of the column

Supplier: Ace Glass

Modified Bidwell & Sterling type with overflow to allow excess solvent to return to boiling flask

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

This Vigreux distillation column has a male drip tip on the joint of the Claisen side arm, and a [ST] 10/30 joint for a 25mm immersion thermometer

Supplier: Ace Glass

Especially useful when heavier-than-water solvents are employed

Supplier: Ace Glass

Adapter's top joint is a combination cap, thread and joint to accommodate and seal other microscale apparatus.

Supplier: Ace Glass

Arsenic Limit Test apparatus as described in the European Pharmacopeia chapter 2.4.3.

Supplier: Ace Glass

Distilling head sits on top of your vapor path column. Has condenser side arm with drip tip.

Supplier: Corning

This Hickman Still Head is a replacement part for the 6949M series of PYREX® microchemistry kits.