2976 Results for: "UPCHURCH SCIENTIFIC"

Supplier: UPCHURCH SCIENTIFIC

Designed to cut polymer tubing ¹/₁₆" and ¹/₈" O.D.

Supplier: UPCHURCH SCIENTIFIC

PEEK or FEP.

Supplier: UPCHURCH SCIENTIFIC

These standard inline check valves are made from gold plated stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, U-660, replacement flangeless ferrule, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 5/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, A-418 frit, Porosity: 0,5 µm, Thickness: 1,57 mm, Frit Ø ext.: 1,6 mm, Frit volume: 0,6 µl, Frit material: Stainless steel, Ring ext. Ø: 5,08 mm, Ring material: PCTFE

Supplier: UPCHURCH SCIENTIFIC

Stainless steel, PEEK or UHMWPE

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, VHP torque wrench, Tightening torque: 1,13 N-m, Use with head style: 1/4" hex

Supplier: UPCHURCH SCIENTIFIC

PEEK Zero Dead Volume unions: Zero Dead Volume (ZDV) unions come complete with two F-300 fingertight fittings for ¹/₁₆" Ext.Ø tubing and are pressure rated to 5000 psi (344 bar).

Supplier: UPCHURCH SCIENTIFIC

These filters are ideal for higher pressure applications and to help prevent particulate contamination.

Supplier: UPCHURCH SCIENTIFIC

Inline filters consist of a stainless steel body and two PEEK end fittings.

Supplier: UPCHURCH SCIENTIFIC

Made of stainless steel or PEEK.

Supplier: UPCHURCH SCIENTIFIC

Pressure relief valves are ideal for preventing system over-pressurisation. These products protect system components by diverting fluid flow automatically when inline pressure exceeds the set limit.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, V-100D 4-way diagonal flow-switching valve, 1/16" OD tubing, 1,0 mm thru-hole, 12,4 µl swept volume

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, LT-135, ferrule, PEEK black/stainless steel, 10-32 coned port, for 1/16" OD tubing, 10000 psi

Supplier: UPCHURCH SCIENTIFIC

Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Supplier: UPCHURCH SCIENTIFIC

For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Supplier: UPCHURCH SCIENTIFIC

Semi-prep inline filters
- Designed for high flow applications
- Flow rates up to 100 ml/min
- Pressure rated to 7500 psi (517 bar)

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, A-337 semi-prep frit, Porosity: 20,0 µm, Thickness: 1,6 mm, Frit Ø ext.: 19,1 mm, Frit volume: 152 µl, Frit material: Stainless steel, Ring ext. Ø: 22,4 mm, Ring material: ETFE

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: UPCHURCH SCIENTIFIC

These PEEK sample loops are metal-free alternatives to stainless steel loops. PEEK loop ends are provided with clean, straight cuts for easy valve installation.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1583 Adapter, 10-32 coned, female to 1/4-28 flat-bottom, female, 1 mm thru-hole, 0,60 µl swept volume, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

These filters are designed to seal and filter simultaneously by incorporating a frit into the body of a flat-bottom ferrule.

Supplier: UPCHURCH SCIENTIFIC

These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Supplier: UPCHURCH SCIENTIFIC

PEEK.