1826 Results for: "Retsch GmbH"

Supplier: Retsch GmbH

Retsch analytical sieve shakers are used in research and development, quality control of raw materials, interim and finished products, as well as in production monitoring.

Supplier: Retsch GmbH

Shaker, Sieve Shaker

Supplier: Retsch GmbH

Mill

Supplier: Retsch GmbH

Planetary mills pulverise and mix soft, medium-hard to extremely hard, brittle and fibrous materials quickly without loss. Examples of applications include minerals, ores, chemicals, ceramics, soils, household and industrial waste and sample preparation for spectral analysis. These mills are suitable for long term trials and continuous use and are used for dry and wet grinding in all industry sectors, where a high degree of reproducibility, fineness, purity and speed is required. The excellent performance is achieved by the high centrifugal forces and very high pulverisation energy generated by the planetary mill design. The control system allows the operator to control speed, grinding time, direction reversal and interval times. The mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. Safety features include automatic safety self-test and a noise protected and ventilated chamber. A backup memory in the event of power failure ensures storage of remaining grinding time. Grinding sets are available in six different materials that allow sample preparation without contamination.

Supplier: Retsch GmbH

Push-fit rotor, 8 teeth, corrosion-resistant steel 1.4404 (316), 70 mm Ø, For: ZM 200

Supplier: Retsch GmbH

Spare breaking jaws, tungsten carbide, 1 pair, For: BB 50

Supplier: Retsch GmbH

Shaker, Sieve Shaker

Supplier: Retsch GmbH

The BB 50 is a robust and powerful forced feed crusher that has been specifically designed for rapid but gentle, bench-top sample preparation of hard, brittle and hard-ductile materials in batches. The dust-tight, laboratory instrument is suitable for applications including constructional materials, mineralogy, metallurgy, ceramics and environmental analysis. A convenient operating keypad with digital display and a memory function for gap width setting, facilitates reproducible operation.

Supplier: Retsch GmbH

Grinding balls, Sintered aluminium oxide, Ø: 15 mm

Supplier: Retsch GmbH

Sieve, for mills, Stainless steel, Bottom sieves, trapezoid holes, Mesh size: 1,00 mm

Supplier: Retsch GmbH

Pellet Press, PP 25 (Retsch)

Supplier: Retsch GmbH

Grinding elements set, with 48 grinding elements, Zirconium oxide, For use with: XRD-Mill McCrone

Supplier: Retsch GmbH

304 stainless steel, ISO 3310-1:2001-09.

Supplier: Retsch GmbH

Holds a maximum of 10 sieves with diameters up to 203 mm.

Supplier: Retsch GmbH

Sieves made from 304 stainless steel are individually laser engraved with clear and precise labelling for full traceability. They are fully compatible with Retsch's existing products and can be combined with other sieves without problems.

Supplier: Retsch GmbH

Disc set, tungsten carbide

Supplier: Retsch GmbH

Lid, stainless steel, Ø: — mm, Height: 400 mm

Supplier: Retsch GmbH

Ultrasonic bath accessories, Lid, stainless steel, For: UR 3

Supplier: Retsch GmbH

Grinding jars, Capacity: 50 ml, Stainless steel

Supplier: Retsch GmbH

Sample splitters are used for the simple dividing and reduction of bulk materials of all kinds. Ideal for the on site reduction of sample material. Depending on the particle size, material and particle size distribution, the opening width of the passage should be 2,5 to 3 times greater than the diameter of the largest particle (particle size factor).

Supplier: Retsch GmbH

The Cross Beater Mill SK 300 is used for batchwise or continuous primary and fine size reduction. This robust mill can be operated in laboratories but also in production environments under rougher conditions.

Supplier: Retsch GmbH

The Vibratory feeder is used for uniform continuous feed of pourable bulk materials and fine powders.

Supplier: Retsch GmbH

The PT 200 is a rotating tube divider suitable for representative sampling and exact dividing of larger quantiies of bulk powdered and granular materials.

Supplier: Retsch GmbH

Sieves made from 304 stainless steel are individually laser engraved with clear and precise labelling for full traceability. Available in three of the most commonly used sizes. They are fully compatible with Retsch's existing products and can be combined with other sieves without problems.

Supplier: Retsch GmbH

The mortar grinder RM 200 comminutes inorganic and organic substances to analytical fineness. It can mix and homogenise powders, suspensions and pastes. The grinder is also ideal for the uniform trituration of homeopathic and pharmaceutical products. Depending on the sample, amounts from approx. 10 to 190 ml can be processed in the RM 200.

Supplier: Retsch GmbH

Robust and powerful forced feed crushers that have been specifically designed for sample preparation of hard and brittle materials in batches or continuously. The crushers are suitable for applications including constructional materials, mineralogy, metallurgy, ceramics and environmental analysis. The crushed sample is collected in a removable stainless steel collector. Safety features include a no-rebound hopper and safety switch and brake to ensure an immediate stop when the unit is opened.

Supplier: Retsch GmbH

Stainless steel, according to DIN/ISO 3310/1

Supplier: Retsch GmbH

Sieves made from 304 stainless steel are individually laser engraved with clear and precise labelling for full traceability. They are fully compatible with Retsch's existing products and can be combined with other sieves without problems.

Supplier: Retsch GmbH

The DM 200 disc mill is used for batch-wise or continuous preliminary and fine size reduction of medium-hard to hard-brittle solids. The robust design, including a hinged grinding chamber for easy cleaning, makes the mill suitable for a wide range of materials and applications in laboratories and pilot plants.

Supplier: Retsch GmbH

These simple to use laboratory mills have been developed for grinding and homogenising small amounts of sample. They are suitable for size reduction of hard and brittle samples as well as for soft, elastic and fibrous materials, disruption of biological cells and DNA/RNA recovery. The MM 400 can also be used for wet and cryogenic grinding. The grinding time is very short and the sample is hardly warmed at all. Application areas include mineralogy, chemical and environmental research as well as pharmaceutical sample analysis and biotechnology. Cell disruption can be achieved in reaction vials using specially designed adapters. The mills can also mix and homogenise powders and suspensions in less than a minute.