Masterflex® L/S® Multichannel Pump Head for High-Performance Tubing, 4-Channel

MFLX07536-04

: Avantor Fluid Handling

Masterflex® L/S® Multichannel Pump Head for High-Performance Tubing, 4-Channel

MFLX07536-04

: Avantor Fluid Handling

Model:
07536-04
07535-04
07534-08
07536-02
07535-08
07534-04

Gear ratio:
1:1
1:1
1:1
1:1
1:1
1:1

Max. flow rate per channel:
2300 ml/min
280 ml/min
200 ml/min
2300 ml/min
280 ml/min
200 ml/min

Min. flow rate per channel:
0,032 ml/min
0,0009 ml/min
0,00052 ml/min
0,032 ml/min
0,0009 ml/min
0,00052 ml/min

No. of channels:
4
4
8
2
8
4

Occlusion:
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed

Open-head sensor:
No
No
No
No
No
No

Optimum RPM range:
0,02 - 600 rpm
0,02 - 600 rpm
0,02 - 600 rpm
0,02 - 600 rpm
0,02 - 600 rpm
0,02 - 600 rpm

Pump series:
L/S
L/S
L/S
L/S
L/S
L/S

Suction lift:
8,8 m (29 ft.)
8,8 m (29 ft.)
8,8 m (29 ft.)
8,8 m (29 ft.)

Tubing retention:
Stopped Tubing
Stopped Tubing
Stopped Tubing
Stopped Tubing
Stopped Tubing
Stopped Tubing

Tubing sizes accepted:
Two-stop L/S® 15, L/S 24, L/S 35
Two-stop L/S® 13, L/S 14, L/S 16
Two-stop microbore
Two-stop L/S® 15, L/S 24, L/S 35
Two-stop L/S® 13, L/S 14, L/S 16
Two-stop microbore

Volume per revolution with L/S 13 tubing:
0,045 ml
0,045 ml

Volume per revolution with L/S 14 tubing:
0,16 ml
0,16 ml

Volume per revolution with L/S 15 tubing:
1,6 ml
1,6 ml

Volume per revolution with L/S 16 tubing:
0,47 ml
0,47 ml

Volume per revolution with L/S 24 tubing:
2,8 ml
2,8 ml

Volume per revolution with L/S 35 tubing:
3,8 ml
3,8 ml

Warranty:
1 year
1 year
2 years
1 year
1 year
2 years

Get low-pulsation synchronous flow in multiple channels without cartridges.

Flow range 0.045 to 2300 ml/min per channel— flow rate depends on drive rpm and tubing size
Stainless steel (SS) rotor / roller for greater durability and chemical resistance
Stackable two-, four-, or eight-channel heads for up to 24 channels
Simple tubing installation—lLoad the tubing, latch the occlusion bed, and run the pump

Three roller heads offer higher flow rates

The L/S® multichannel pump heads are designed with machined stainless steel (SS) and anodized aluminum with SS rotor, bearings, and rollers for reliable, continuous-duty operation. Choose pump heads for microbore tubing, L/S Precision tubing, or L/S High-Performance Precision tubing based on your application requirements. Compatible with L/S® drives that accept two or more pump heads and have a 1/10 hp minimum.