Water purification systems, Milli-Q® IQ 7003/05/10/15

Supplier: Merck

Certificates

Supplier: Merck

About this item

An integrated ultrapure and pure water system that is intelligent, easy to use and environmentally friendly.

Delivers both ultrapure and pure water from up to four POD dispensers
Four pure water production flow rates (3, 5, 10 or 15 L/h)
Three tanks sizes (25, 50 or 100 L)
Space-saving and clutter-free installation options, on the wall, under the bench, or both
Large selection of application POD-Paks, to meet your every application need
Tailored service plans and a range of additional support options

The Milli-Q® IQ 7003/7005/7010/7015 system is a fully integrated modern water purification system delivering both superior quality ultrapure (Type 1) and pure (Type 2) water direct from a tap water source. It integrates Elix® electro deionisation (EDI) technology, intuitive touch screens, Q-POD® ultrapure and E-POD® pure dispensers, and mercury-free UV lamps. The system provides an ergonomic and compact design to improve lab productivity, reduce waste and accelerate research.

Magnify daily efficiency:
E-POD® and Q-POD® dispensers are compact, ergonomic and intuitive, making lab work more effortless and enjoyable than ever. Less footprint on benches saves space.

Environmental friendly operation:
Mercury-free UV lamps, less water waste and paperless data management.

Improved intelligence:
Smart and intuitive HMI with clear information on the status, alerts, alarms and consequences and connectivity with new enable Wi-Fi.

Minimise uncertainty - magnify reliability:
POD-Paks provide the perfect solution to meet the needs of your various applications. Each Application-Pak polisher targets specific contaminants and removes them right at the POD dispenser.

Certifications: The Milli-Q® IQ 7003 and Milli-Q® IQ 7005 systems have been tested by an independent and accredited company for compliance with CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. In addition, the Milli-Q® IQ 7003/7005/7010/7015 system is built using components and practices recommended by UL and has been cUL marked.

Specifications

Catalog No:
171-1379
171-1378
171-1380
171-1381

Model:
Milli-Q® IQ 7005
Milli-Q® IQ 7003
Milli-Q® IQ 7010
Milli-Q® IQ 7015

Feed water:
Potable tap water (consult manual for requirements)
Potable tap water (consult manual for requirements)
Potable tap water (consult manual for requirements)
Potable tap water (consult manual for requirements)

Production flow rate:
5 L/h
3 L/h
10 L/h
15 L/h

TOC content:
≤2 ppb (µg/L); typically ≤5 ppb (Type 1, from Q-POD® dispenser; in the appropriate operating conditions, otherwise typically ≤ 5 ppb.);
≤30 ppb (Type 2);
(values are typical and may vary depending on the feed water)
≤2 ppb (µg/L); typically ≤5 ppb (Type 1, from Q-POD® dispenser; in the appropriate operating conditions, otherwise typically ≤ 5 ppb.);
≤30 ppb (Type 2);
(values are typical and may vary depending on the feed water)
≤2 ppb (µg/L); typically ≤5 ppb (Type 1, from Q-POD® dispenser; in the appropriate operating conditions, otherwise typically ≤ 5 ppb.);
≤30 ppb (Type 2);
(values are typical and may vary depending on the feed water)
≤2 ppb (µg/L); typically ≤5 ppb (Type 1, from Q-POD® dispenser; in the appropriate operating conditions, otherwise typically ≤ 5 ppb.);
≤30 ppb (Type 2);
(values are typical and may vary depending on the feed water)

Resistivity at +25 °C:
18,2 MΩ·cm (Type 1);
>5 MΩ·cm; typically 10 - 15 MΩ·cm (Type 2);
(resistivity can also be displayed non-temperature-compensated as required by USP)
18,2 MΩ·cm (Type 1);
>5 MΩ·cm; typically 10 - 15 MΩ·cm (Type 2);
(resistivity can also be displayed non-temperature-compensated as required by USP)
18,2 MΩ·cm (Type 1);
>5 MΩ·cm; typically 10 - 15 MΩ·cm (Type 2);
(resistivity can also be displayed non-temperature-compensated as required by USP)
18,2 MΩ·cm (Type 1);
>5 MΩ·cm; typically 10 - 15 MΩ·cm (Type 2);
(resistivity can also be displayed non-temperature-compensated as required by USP)

Bacteria:
<0,01 KBE/ml (Typ1 aus Q-POD®-Spender)
<0,01 KBE/ml (Typ2 aus E-POD®-Spender+Endfilter)
Mit Millipak®- oder Biopak®-Filter bei Installation + Verwendung in einer Laminar-Flow-Haube
Werte sind typisch und können je nach Speisewasser variieren
<0,01 cfu/ml (Type 1, from Q-POD® dispenser);
<0,01 cfu/ml (Type 2, from E-POD® dispenser with final filter);
(With Millipak® or Biopak® filter when installed and used in a laminar flow hood; values are typical & may vary with the feed water)
<0,01 KBE/ml (Typ1 aus Q-POD®-Spender)
<0,01 KBE/ml (Typ2 aus E-POD®-Spender+Endfilter)
Mit Millipak®- oder Biopak®-Filter bei Installation + Verwendung in einer Laminar-Flow-Haube
Werte sind typisch und können je nach Speisewasser variieren
<0,01 KBE/ml (Typ1 aus Q-POD®-Spender)
<0,01 KBE/ml (Typ2 aus E-POD®-Spender+Endfilter)
Mit Millipak®- oder Biopak®-Filter bei Installation + Verwendung in einer Laminar-Flow-Haube
Werte sind typisch und können je nach Speisewasser variieren

Particles:
No particles with size >0,22 µm (Type 1, from Q-POD® dispenser);
No particles with size >0.22 µm (Type 2, from E-POD® dispenser with final filter);
(With Millipak® filter, with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
No particles with size >0,22 µm (Type 1, from Q-POD® dispenser);
No particles with size >0.22 µm (Type 2, from E-POD® dispenser with final filter);
(With Millipak® filter, with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
No particles with size >0,22 µm (Type 1, from Q-POD® dispenser);
No particles with size >0.22 µm (Type 2, from E-POD® dispenser with final filter);
(With Millipak® filter, with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
No particles with size >0,22 µm (Type 1, from Q-POD® dispenser);
No particles with size >0.22 µm (Type 2, from E-POD® dispenser with final filter);
(With Millipak® filter, with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)

Endotoxin:
<0,001 EU/mL(Type 1, from Q-POD® dispenser);
<0,001 EU/ml (Type 2, from an E-POD® dispenser with final filter);
(With Biopak® polisher when installed and used in a laminar flow hood; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
<0,001 EU/mL(Type 1, from Q-POD® dispenser);
<0,001 EU/ml (Type 2, from an E-POD® dispenser with final filter);
(With Biopak® polisher when installed and used in a laminar flow hood; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
<0,001 EU/mL(Type 1, from Q-POD® dispenser);
<0,001 EU/ml (Type 2, from an E-POD® dispenser with final filter);
(With Biopak® polisher when installed and used in a laminar flow hood; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
<0,001 EU/mL(Type 1, from Q-POD® dispenser);
<0,001 EU/ml (Type 2, from an E-POD® dispenser with final filter);
(With Biopak® polisher when installed and used in a laminar flow hood; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)

RNases:
<1 pg/ml (Type 1, from Q-POD® dispenser);
<1 pg/ml (Type 2, from an E-POD® dispenser with final filter);
(with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
<1 pg/ml (Type 1, from Q-POD® dispenser);
<1 pg/ml (Type 2, from an E-POD® dispenser with final filter);
(with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
<1 pg/ml (Type 1, from Q-POD® dispenser);
<1 pg/ml (Type 2, from an E-POD® dispenser with final filter);
(with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)
<1 pg/ml (Type 1, from Q-POD® dispenser);
<1 pg/ml (Type 2, from an E-POD® dispenser with final filter);
(with Biopak® polisher; values are typical and may vary depending on the nature and concentration of contaminants in the feed water)

DNases:
<5 pg/mL (Type 1, from Q-POD® dispenser)
<5 pg/ml (Type 2, from an E-POD® dispenser with final filter)
(With Biopak® polisher; values are typical & may vary with the feed water)
<5 pg/mL (Type 1, from Q-POD® dispenser)
<5 pg/ml (Type 2, from an E-POD® dispenser with final filter)
(With Biopak® polisher; values are typical & may vary with the feed water)
<5 pg/mL (Type 1, from Q-POD® dispenser)
<5 pg/ml (Type 2, from an E-POD® dispenser with final filter)
(With Biopak® polisher; values are typical & may vary with the feed water)
<5 pg/mL (Type 1, from Q-POD® dispenser)
<5 pg/ml (Type 2, from an E-POD® dispenser with final filter)
(With Biopak® polisher; values are typical & may vary with the feed water)