VWR® pHenomenal® OPOX 11-3 IDP Optical Dissolved Oxygen Sensor
664-0182
- Connection:1.5 m cable, IDP-plug
- Ø×L:15,3×140 mm
- Type:pHenomenal® OPOX 11-3
- Description:pHenomenal® OPOX 11-3 optical oxygen probe with built-in temperature sensor
- Material:Epoxy
- Environmentally Preferable:
- Pk:1
- Temp.:0...+50 °C
This IDP (Intelligent Digital Probe) dissolved oxygen/temperature sensor can be used with the pHenomenal® MD 8000 H and MD 8000 L multi-parameter meters.
- Post moders type of oxygen measurement: No chemicals, no electrolytes
- Calibration data (serial number, calibration status) is stored in the electrode/probe, transmitted to the meter and displayed
- Proven reliability and accuracy
- Correct measurement results due to direct signal processing in sensor and digital transmission of values
- All parameters are easily measured with cable lengths of up to 100 metres
- Same universal connector for all electrodes and probes
Measuring range concentration: 0,00 to 20,00 mg/L
Measuring range saturation: 0,0 to 200,0%
Measuring range partial pressure: 0,0 to 400 hPa
Accuracy: ±0,2 °C
The electrodes can provide the following data, shown on the meter's screen:
- Model name
- Serial number
- Calibration status (+++, ++, +, −, blank)
- The calibration history includes the last 10 calibrations, including buffers used, mV values.
: Includes optical DO sensor and manual only.