You searched for: Fittings and Connectors

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-126S, fitting, standard micro knurl, PEEK red, 6-32 coned port, for 1/32" OD tubing, 5000 psi, PEEK

Supplier: SEMADENI

Connectors, T-piece, made of POM, white, strong design, temperature resistant up to 100 °C.

Supplier: PIEPER FILTER

PP, transparent.

Supplier: KOHLER

Tubing connectors connect fluid carrying lines reliably. Can be used in motor vehicles as well as in every industrial application.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

PEEK with titanium filter element.

Supplier: HWS LABORTECHNIK

Metal adapter, M 16×1 thread, with A execution, Metal

Supplier: Restek

Injector nut kit for Shimadzu 17A, 2010, and 2014 GCs.

Supplier: Restek

EXP® reusable fittings for easy and reliable HPLC and UHPLC connections for 10 to 32 fittings and ¹/₁₆" tubing.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

PEEK, stainless steel or PCTFE.

Supplier: OMNIFIT

Omni-Lok™ inverted cone fittings provide a simple, easy to use low-pressure connection. Only the ETFE cone is in the fluid path.

Supplier: UPCHURCH SCIENTIFIC

ETFE or PEEK.

Supplier: Restek

These internal cross are made of stainless steel. Used to connect four lines. Ideal for 1,6 mm OD tubing.

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. 10-32 threads, for 1/16" tubing. Fingertight up to 350 bar (5000 psi).

Supplier: VICI JOUR RESEARCH

Fiberglass reinforced PP with PP washers. A number of chromatography systems still require or prefer flanged connections. When the tubing is flanged, the washer never comes in contact with the mobile phase.

Supplier: VICI JOUR RESEARCH

These PEEK adapters connect standard LC fittings to standard LC ports, usable with most common organic and inorganic HPLC solvents without risking corrosion, metal contamination, or protein degradation.

Supplier: OMNIFIT

Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.

Supplier: Restek

The tee is designed with a glass spiral to promote sample vaporisation and to provide even sample distribution to the two columns. The glass spiral also traps sample residue and minimises the need for guard columns. A Press-Tight® taper in each outlet leg facilitates a perfect dead volume free connection to each analytical column and allows visual confirmation of the column connection.

Supplier: VICI JOUR RESEARCH

VICI Stainless Steel Unions are made for joining two pieces of ¹/₁₆" Ø tubing, or an ¹/₈" tube. They are precision machined with a focus on the concentricity of the bore as well as on the finish of the surfaces to give an absolute leak-free connection. These Unions have internal threads, which we recommend for most applications. Internal threads make stronger connections and internal fitting details provide the lowest dead volume for high performance instrumentation.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, UH-427 VHP tee for 1/16" OD tubing, 10-32 coned threads, 0,50 mm thru-hole, 0,57 µl swept volume, stainless steel, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: Restek

These finger-tight capillary column nuts made from high-quality stainless steel are an alternative to conventional column nuts. These fittings work best with graphite type ferrules and help prevent over tightening, which can cause graphite material to exude into the inlet.

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: OMNIFIT

Connector, 1/16" (1.6 mm) pipe

Supplier: SEMADENI

Connectors for easy installation on any plastic containers by means of counter screw.

Supplier: SEMADENI

PP, natural

Supplier: Thermo Fisher Scientific

Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.

Supplier: SEMADENI

Made of PP.

Supplier: Restek

Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.