You searched for: Electrophoresis Reagents

Supplier: Thermo Fisher Scientific

The Fast Western Blot Kits, SuperSignal™ West Dura provide reagents and protocol for reliable and rapid, 1 hour chemiluminescent Western blotting at femtogram levels of sensitivity. These complete Fast Western Blot Kits requires minimal hands on time and yield results comparable to classical Western blotting with SuperSignal™ West Dura Chemiluminescent Substrate. This substrate produces a signal that is detectable using photographic or other imaging methods. The developed blots can be repeatedly exposed and stripped of the primary antibody and reprobed. The complete kit contains all the reagents necessary to block and probe a Western blot with mouse or rabbit primary antibody.

Supplier: G-Biosciences

Kingdom blot is prepared using total protein extracted from a variety of species, where whole species is not available the whole liver lysate is used. These blots can be used to identify similar proteins in other species, including human, chicken, frog, worm, Drosophila, yeast, Aspergillus, E. coli, Rhizobium and green algae.

Supplier: Rockland Immunochemicals

These Chemiluminescent Western Blot Kits allow for the detection of primary polyclonal or monoclonal antibodies provided by the user. After protein separation and transfer, the membrane is probed with primary antibody. Detection of the membrane-bound primary antibody-antigen complex is achieved by the addition of a secondary antibody conjugated to the enzyme horseradish peroxidase. The enzyme reacts with a specialised formulation of luminol, an extremely sensitive, non radioactive substrate that emits light and allows visualisation using X-ray film or other imaging methods, including highly sensitive CCD cameras and imaging systems. Because of the extremely high sensitivity of the kit, primary and secondary antibodies can be used at greater dilutions. Primary antibodies currently diluted 1:1000 using an ECL™ substrate is the equivalent of a 1:5000 dilution using the FemtoMax™ substrate.

Supplier: Thermo Fisher Scientific

SSC solution is commonly used in nucleic acid hybridization techniques at concentrations ranging from 0,1X to 20X depending on the application. It is used to facilitate transfer of nucleic acids to membranes in Southern and Northern blotting, dot blotting, and colony and plaque lifts.

Supplier: Rockland Immunochemicals

FemtoMax™ is an extremely sensitive, non radioactive, and enhanced luminol-based chemiluminescent substrate for the detection of horseradish peroxidase (HRP). It allows for the detection of femtogram (10 to 15) amounts of antigen using photographic film or other imaging methods including highly sensitive CCD cameras.

Supplier: Thermo Fisher Scientific

The Fast Western Blot Kit, SuperSignal™ West Pico Substrate contains optimised reagents and protocol for picogram-level detection and and Western blot development less than 1 hour after gel transfer.

Supplier: EDVOTEK

20 µg for 20 gels.

Supplier: LONZA

Lonza SimplyLoad™ DNA ladders are ready to load directly onto the gel to maximise time and convenience. Each band has an ideal 50% G-C content for rapid, precise sizing and sharp resolution. Free from contaminating plasmid DNA so they have minimal background.

Supplier: AAT BIOQUEST

The ProLite™ 5 to 245 kD protein ladder is a high-quality three-colour protein standard consisting of 13 prestained proteins.

Supplier: Thermo Fisher Scientific

QuantaRed™ Enhanced Chemifluorescent HRP Substrate contains chemical enhancers to increase the fluorescent yield and sensitivity of 10-acetyl-3,7-dihydroxyphenoxazine (ADHP) chemifluorescence.

Supplier: Thermo Fisher Scientific

This wide range molecular weight marker contains 60 ng/μl of 21 fragments from 100 bp to 12000 bp. The bands appear in 100 bp increments from 100 to 1000 bp and in 1000 bp increments from 1 to 12 kb. Bands at 1 kb and 5 kb stain brighter to aid identification.

Supplier: Biotium

A visible three- colour protein marker for SDS-PAGE or western blotting, with 12 bands ranging from 8 to 245 kDa.

Supplier: Cytiva

Amersham™ ECL™ Prime is a highly sensitive Western blotting detection reagent characterised by stable signal emission, allowing for the possibility of repeated exposures and making it easier to process several blots in the same experimental run. Amersham™ ECL™ Prime delivers a detection system that is sensitive, stable, precisely quantitative across a wide dynamic range of protein levels, and conservative in its consumption of expensive antibody reagents. The high performance of Amersham™ ECL™ Prime is due to the presence of an enhancer in the reagent, increasing enzyme turnover, and thereby significantly increasing both signal intensity and duration. The light signal is further intensified by the addition of a catalyst.

Supplier: Cytiva

Pharmalyte® carrier ampholytes, prepared by the co-polymerization of glycine, glycylglycine, amines and epichlorohydrin, are available in five broad-range and four narrow-range pH intervals.

Supplier: Cytiva

Amersham ECL Blocking Agent is for blocking nitrocellulose and PVDF membranes to be used with Amersham ECL, Amersham ECL Prime and Amersham ECL Select Western Blotting Detection Reagents

Supplier: Cytiva

Amersham ECL Select is a high sensitivity reagent for chemiluminescent Western blotting detection.

Supplier: Cytiva

CypHer5E is a red-excitable, pH-sensitive cyanine dye derivative that is minimally fluorescent at a basic pH and maximally fluorescent at an acidic pH.

Supplier: G-Biosciences

DNAmark™ 100 bp Plus ladder consists of 14 DNA fragments ranging in size from 100 to 3000 base pairs (bp). The 500 bp and 1200 bp fragment are present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp and 1200 bp are 40 ng. The 500 bp and 1200 bp fragment are 100 ng.

Supplier: G-Biosciences

DNAmark™ 100 bp ladder consists of 11 fragments ranging from 100 to 1500 base pairs (bp). The 500 bp fragment is present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp are 40 ng. The 500 bp fragment is 100 ng.

Supplier: G-Biosciences

DNAmark™ 500 bp ladder consists of 10 DNA fragments ranging from 500 bp to 5000 bp. The 2000 bp fragment is present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 2000 bp are 40 ng. The 2000 bp fragment is 100 ng.

Supplier: Cytiva

ECL Direct Nucleic Acid Labeling and Detection Systems are based on the direct labeling of DNA or RNA probes with horseradish peroxidase (HRP) in a simple 20 min chemical reaction. The resulting probe can be used without purification. Detection is achieved by generation of light via the HRP-catalyzed breakdown of luminol.

Supplier: Cytiva

AlkPhos Direct™ Labelling and detection systems are based on the rapid, direct labelling of DNA or RNA probes with thermostable alkaline phosphatase. AlkPhos Direct™ combines the convenience of direct enzyme labelling (no blocking or antibody stages) with those of alkaline phosphatase detection (long light output and high sensitivity).

Supplier: LONZA

DNA marker is for rapid size estimation of PCR products and restriction fragments. DNA can be visualised by ethidium bromide staining or kinased with radiolabelled ³²P for detection by autoradiography.

Supplier: G-Biosciences

DNAmark™ 1 kb Plus ladder contains 15 DNA bands ranging from 100 bp to 10 kb. The 500 bp and 3000 bp fragment are present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp and 3000 bp are 40 ng. The 500 bp and 3000 bp fragment are 100 ng.

Supplier: Merck Millipore (Novagen)

Molecular size markers for routine use in plasmid cloning, the Perfect DNA™ markers contain sets of DNA species having convenient, easy-to-remember sizes for agarose gel analysis. The markers have uniform band intensities except for the indicated reference bands, which are useful for instant band identification.

Supplier: PanReac AppliChem

The main applications for prestained protein markers are the monitoring of protein migration during SDS-PAGE, verification of Western transfer efficiency on membranes, and estimation of protein sizes on SDS-polyacrylamide gels and Western blots.

Supplier: LONZA

Thse DNA ladders provides rapid and easy size determination of the DNA samples. Each band has an ideal 50 % G-C content for precise sizing and sharp resolution. It is free from contaminating plasmid DNA with minimal background.

Supplier: Merck Millipore (Novagen)

The Perfect DNA™ ladders contain sets of DNA species having convenient, easy-to-remember sizes for agarose gel analysis. The markers have uniform band intensities and cover a wide range of DNA sizes.

Supplier: PanReac AppliChem

This DNA ladder is ideal for determining the size of double-stranded DNA ranging from 100 to 1,000 base pairs. The ladder consists of ten fragments that range in size from 100 to 1,000 bp in 100 bp increments. The 500 bp fragment is present at increased intensity to allow easy identification. All fragments are blunt-ended.

Supplier: LONZA

QuantLadders are prepared from five highly purified DNA fragments that provide visual quantitation of DNA within ±1% accuracy. The DNA QuantLadder provides each DNA fragment in perfect relative mass equivalence at 100 ng, 70 ng, 50 ng, 20 ng and 10 ng. The reverse QuantLadder simply reverses the mass equivalence order of the QuantLadder.