You searched for: Pure and Ultra Pure Water Systems

Supplier: Sartorius

Arium® mini is exclusively made of high grade materials. With its intuitive guidance, closed bag system and the practical arium® aqua stop, the unit is ideal for a daily consumption of up to 10 L of ultrapure water.

Supplier: Sartorius

The arium® basic system supplies ASTM Type I ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® basic is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Merck

Suitable for general, non-critical laboratory applications or as a pretreatment for ultrapure water systems, the RiOs™ 3 system provides an ideal solution for Type III laboratory grade water needs such as manual cleaning and rinsing, buffer preparation, feed water for humidifiers, autoclaves and glassware washers. Designed for users seeking a compact, easy to use solution, the RiOs™ 3 system will be highly appreciated for its intuitive operation, small footprint and ease of maintenance. For users needing access to ultrapure water, the RiOs™ 3 system is ideal as pretreatment for Synergy® or Milli-Q® water purification systems. Up to 30 L/day of high quality analytical grade water (Type III water) from tap water.

Supplier: Merck

The compact, easy to use Milli-DI® water purification system has been designed especially to meet a need for small quantities of pure water, between 3 and 5 litres per day. The water produced is suitable for use in chemical and electrochemical applications, for the production of buffers, reagents and microbiological culture media, and a multitude of other applications. Milli-DI® water can also be used as feed water for ultrapure water systems.

Supplier: Merck

Economical water system, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 l/min. For clinical analysers with pure water needs up to 480 L daily

Supplier: Merck

The Milli-Q® SQ 240CV water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a fixed preset volume dispenser that records and repeats the dispensing volume of ultrapure water.

Supplier: Merck

This system is a very compact solution designed for low volume analysers. It efficiently combines reverse osmosis (RO) technology with deionisation (DI) resins to produce CLSI® Special Reagent Water. With high resistivity and low TOC (typically >10 MΩ.cm at 25 °C and <50 ppb before storage), this product water is of higher quality than either water produced by stills or service DI water.

Supplier: Sartorius

It is compact, environmentally friendly, reliable and easy-to-use. arium® comfort I produces ASTM Type 1 ultrapure water and Type 3 pure water. The system contains state of the art reverse osmosis technology and a unique cartridge. arium® comfort I optimizes water consumption using the integrated iJust control unit. Applied for HPLC, GC-MS, AAS, ICP-MS, Ion chromatography, TOC-Analysis, photometry and for buffer solutions.

Supplier: Merck

RiOs™ Essential systems are ideal for laboratories needing reliable, constant production of Reverse Osmosis, RO (Type 3) water from potable tap water. They integrate complementary water purification techniques, including pretreatment and high-performance reverse osmosis (RO) membranes.

Supplier: Sartorius

Directly connected to your potable feed water source, this system delivers pure water (Type III) of the highest quality.

Supplier: Sartorius

The arium® advance EDI provides Type 2 water in consistently high quality. The innovative iJust makes the best use of environmental resources by automatically optimizing water consumption. Unlike conventional water purification systems, the unique display with touch functions in combination with the intuitive menu navigation ensures easy operation.

Supplier: ELGA LabWater

Pure and ultra pure water system, PURELAB®, Pretreatment pack for PURELAB® Chorus 2 and PURELAB® Chorus 3 water purification systems

Supplier: ELGA LabWater

Delivering the ultimate in water purity for absolute confidence in your results.
Solutions for Type I ultrapure water.

Supplier: ELGA LabWater

Pure and ultra pure water system, PURELAB®, PURELAB purification quadpack, with 0,2 µm final filter

Supplier: ELGA LabWater

Pure and Ultra Pure Water System, Starter kit 2 MEDICA Pro includes installation kit, Protek L2 pre treatment cartridge, Medpure L1 deionisation cartridge

Supplier: ELGA LabWater

By choosing an ELGA water purification system, you are making an investment in quality, reliability and value.

Supplier: ELGA LabWater

An ideal choice for Laboratories that require more than 20 L of type 1 water per day. The adjustable flow rate can reach 2 L/min and quality control measures guarantee ultra-pure water with a Low Level of bacteria. This compact, Lightweight device is designed and manufactured to produce ultra-pure water of the highest quality whilst ensuring ease of use and minimal maintenance requirements. The microprocessor-controlled management system ensures the unit is efficient and easy to use. An economical device for producing ultra-pure 18 MΩcm water at temperatures above 25 °C. The unit can be used for analytic applications, such as HPLC, atomic absorption, ion chromatography and molecular biology.

Supplier: ELGA LabWater

PURELAB chorus one complete provides a complete solution from tap to ultrapure water (type one) direct from a potable water supply, and is ideal for laboratories needing up to 100 liters of 18,2 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from a choice of additional halo dispensers.

Supplier: ELGA LabWater

Ideal water system for a new start up lab. Advanced and affordable, providing tap to Type I water.

Supplier: ELGA LabWater

The PURELAB flex 2 uniquely combines ease of use with the accurate delivery of pure water. The flexible modular system can be configured to deliver the quality of water you need for your applications and includes UV photo-oxidation and TOC monitoring. Delivers up to two liters per minute of type I water.

Supplier: ELGA LabWater

The PURELAB Chorus 2+ range provide >15 MΩ.cm pure water. The systems provide additional bacteria and inorganic quality for sensitive analytical and life science applications above that of basic laboratory work. With its simple design and ease of use, water can be dispensed from the system or from a choice of additional Halo Dispensers.

Supplier: ELGA LabWater

PURELAB Chorus 3 provides Type III (primary RO grade) water on demand.

Supplier: ELGA LabWater

This all-in-one system is designed to couple directly with the Metrohm 941 Eluent Production Module. It has an integrated recirculation chamber that ensures a supply of ultrapure water (Type I) to Metrohm ion chromatographs that is guaranteed to be fresh.

Supplier: Purite

Ultrapure water for Laboratory use. Neptune requires a feedwater source that has been pre-treated to <20 µS/cm. It is suitable for analytical and Life science Laboratory applications. Three models are available in the range: Analytical, featuring a Low TOC specification; Life Science, offering Low bacteria, endotoxins and RNases/DNases specification; and Ultimate, which combines the benefits of both the Analytical and Life Science models. Each unit produces between 1,5 and 2 Litres of ultra-pure, 18,2 MΩ.cm, purified water per minute.

Supplier: Thermo Fisher Scientific

The Barnstead Smart2Pure™ system is a compact system that converts tap water into both ASTM Type I and Type II water. It produces 3 or 6 liters of ultra-pure water per hour.

Supplier: Thermo Fisher Scientific

Count on the Thermo Scientific™ Aquanex™ Ultrapure water purification systems for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment.

Supplier: Thermo Fisher Scientific

The Barnstead™ E-Pure™ is designed to connect directly to the tap water feed, and it can handle all of the laboratory high volume ultrapure water applications with low operating costs. This system is ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers.

Supplier: Thermo Fisher Scientific

These water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality. They are designed for laboratories that require up to 15 L/day of ultrapure water for HPLC or other instrumental analyses, sample preparation, glassware rinsing, or molecular biology work in which endotoxins and/or nucleases would interfere.

Supplier: LABCONCO

The WaterPro® BT Water Purification System produces both RO and Type I water directly from tap water. The benchtop design is compact and lightweight so it can easily be transported from lab to lab. The Filter Pack (required, sold separately) bundles all water filter technologies into one convenient twin cartridge package so installation is simple.

Supplier: Thermo Fisher Scientific

Suitable for even the most demanding and sensitive applications, the family of Thermo Scientific™ Barnstead™ GenPure™ water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality.