You searched for: Stirrers

Supplier: RSG

Overhead stirrer shaft, Stirring Shaft, Ø: 8 mm, Length: 320 mm

Supplier: BOCHEM

Propeller stirrer made of stainless steel with four vertical paddles.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller with four blades completely made of PTFE.

Supplier: Cole Parmer

Powerful magnets for strong magnetic coupling.

Supplier: Bohlender

These POM couplings are ideal for balancing misalignment of axes between stirrer and stirrer shaft. Suitable for glass, metal or Bola stirrer shafts. Both models are suitable for rotational speeds of up to 1200 rpm and can be used for both right and left-handed rotation.

Supplier: Bohlender

These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrers which are ideal for use in pilot plants, for thick bottomed stirring vessels, for round flasks and for double walled vessels.

Supplier: BOCHEM

Anchor stirrers made of stainless steel.

Supplier: Heidolph Instruments GmbH & Co.KG

Chucks are designed for use with all RZR series overhead electronic stirrers.

Supplier: Heidolph Instruments GmbH & Co.KG

Powerful electronic stirrers that feature a smooth start operation which prevents spills and splashing media. The speed ramps up slowly until set speed has been reached. Both models feature safe start and stop of operation via an intuitive glass slide touch panel to avoid accidental start-up. An overtemperature sensor shuts off the unit in dangerous heat-up situations, ideal for unattended continuous operation. All units are designed for continuous 24-hour operation, including challenging high viscosity applications in polymer research. High torque levels give better mixing results in less time, maintenance-free motors reduce repairs and down time. Hei-TORQUE Value 400 and Hei-TORQUE Precision 400 units have two speed gears.

Supplier: Bohlender

Stirrer blades made of PTFE, with one sided groove and 10 mm bore diameter.

Supplier: KARTELL

Fit all standard button tip stirring shafts. 'Long groove' keyhole (Ø 9 mm) provides easy insertion into flask neck and proper position for stirring action. Can be used continuously at temperatures up to 250 °C and, for short intervals, to 300 °C.

Supplier: THERMO H + P LABORTECHNIK

Simplify operations with the Thermo Scientific™ Cimarec™ i 20C Controller, a user-friendly, menu-driven microprocessor controller that is included with the Micro, Mini, Compact, Maxi and Telesystems stirrers.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the blade made completely of PTFE.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

The programmable revolutionary 4-position MultiMagStir Genie provides low to high speed stirring and editable memory profiles.

Supplier: THERMO H + P LABORTECHNIK

Multi-position magnetic stirrers for reliable, safe performance with pre-selectable power settings, which optimise stirring efficiency for different liquid volumes and minimise heat output. Stirrers have a large, easy to clean working surface and are ideal for a range of mixing tasks.

Supplier: Heidolph Instruments GmbH & Co.KG

Converts a magnetic stirrer into a multiple experiment workstation, improve the productivity of your laboratory; use a single stirring hotplate to do multiple experiments. Perfect for simple heating/stirring experiments or more complex applications such as synthesis, concentrations, extractions and distillations. Accepts a wide range of standard laboratory glassware including vials, test tubes, beakers and round bottom flasks, a range of inserts are available for small vials up to 250 ml round bottom flasks.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with three blades bent backwards.

Supplier: THERMO H + P LABORTECHNIK

Compact magnetic stirrers with VARIOMAG drive, hermetically sealed in resistant stainless steel housing (except MINI units which are plastic), making these stirrers ideal for use directly in water baths. MINI stirrers are ideal for integration in analytical instruments, cuvette holders or photometers due to their size, however these plastic units are not designed for use directly in baths. There are units with up to 60 stirring positions in this range, and a choice of three external control units. The TELEMODUL 7 has one power setting, the TELEMODUL 20 C has four power settings: 25%, 50%, 75% and 100% and can store three programmes, the TELEMODUL 40 C features ten different power settings from 10 to 100% and a RS232 interface.

Supplier: Cole-Parmer

Use the Integrity 10 reaction station to run ten independent experiments at once. By setting the temperature and stir rate individually for each cell users can assess the impact of both at the same time, speeding up investigative chemistry by ten-fold.

Supplier: Thermo Fisher Scientific

These magnetic hotplate stirrers are designed to provide precise stirring control, exceptional safety and temperature performance for routine tasks. They are available in three sizes, providing flexibility from microscale chemistries to production operations. Units feature innovative engineering for slow-speed stirring and strong magnetic coupling. Top plates are available in a choice of ceramic or aluminium and there is a display design that protects the electronics from spills.

Supplier: Thermo Fisher Scientific

These slow speed stirrers with precise stirring control have a strong magnetic coupling. The raised display design protects the electronics from any liquid spills and units are available with a choice of ceramic or aluminium top plates.

Supplier: Bohlender

KPG stirrer shafts made of borosilicate glass, tiltable moon-shaped stirrer blade with angular groove and clamping bolts completely made of PTFE.

Supplier: Cole Parmer

Large, powerful stirrer for use with vessels up to 30 litre capacity. Powerful magnetic drive with electronic feedback speed control, which accurately maintains the set speed.

Supplier: Bohlender

Micro stirrer shafts made of PTFE-jacketed stainless steel with blade made completely of PTFE. With four round paddles.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the stirring unit made completely of PTFE.

Supplier: Bohlender

Conductor made of borosilicate glass with or without ground joint.

Supplier: Bohlender

KPG stirrer shafts with double pivot made of ground and polished borosilicate glass, tiltable moon-shaped stirrer blade with double-sided groove completely made of PTFE.

Supplier: THERMO H + P LABORTECHNIK

Save space with Thermo Scientific™ Cimarec™ i Telemodul controllers, including Micro, Mini, Compact and Maxi stirrers.